bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class IV
  4. 2 Inch Hitch
  5. 3500 lbs GTW
  6. Visible Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Draw-Tite

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: 75684
In Stock
$204.48
Retail:$320.73
You Save: $116.25
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75684 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (463)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - 75684

  • Class IV
  • 2 Inch Hitch
  • 3500 lbs GTW
  • Visible Cross Tube
  • 350 lbs TW
  • Draw-Tite
  • 5000 lbs WD GTW
  • 500 lbs WD TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 350 lbs
      • Maximum TW when used with weight distribution: 500 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



75684 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87574 Hidden Hitch Class 3 Trailer Hitch Receiver

Installation Details 75684 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

473 reviews
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:

great job instalted in a hour



by:

great job instalted in a hour



by:

fast service, excellent products



by:

Fast delivery!...good service!...



by:

Easily installed, looks great! THANKS!



by:

I am very pleased with the hidden hitch.was delivered on time and was made perfectly for my kia sorento installation took 20 minutes very pleased with this product.



by:

My hitch came on time and your web site was good. I had the hitch on in less than 30 min. My problem came when I tried to put the wiring in. The instructions had me taking the car apart and were not very clear. I called and had forgotten about your video. After watching your video the wiring was in in 10 min. This is my second time with hidden hitch and I find then a great product. Bob



by:

I purchase a Thule bike rack and a 2inch Hidden Hitch. Both arrived before I expected them and in good condition. I installed the hitch with a friend in less that 20minutes. No issues, as yet I have not unpacked my bike rack. Will do so after my company leaves. I certainly would do business with E trailer in the future, I have already given the link to a friend.



by:

Ordered the hidden hitch for my 2013 Kia Sorento EX. Arrived as planned in perfect condition. Used my motorcycle jack to raise the hitch in place. Was able to secure the hitch with one right side and left side bolt. Pulled muffler to the left with one hand while accessing the other bolt hole. Mounted all four bolts, torqued to specs, finished in 20 minutes. Youtube videos are priceless. Just order the wiring kit for the trailer. Thanks etrailer.



by:

Received Hidden Hitch Product 87574 for my 2012 Kia Sorrento in a timely manner. I watched the video online on the installation process prior to attempting the installation along. As a novice in dealing with anything mechanical, I purchased all required material to accomplish this DIY project. I purchased the 1/2 thread cleaning brush and all other parts were included with the hitch. After having all parts in place to perform the task from start to finish, it took about 40 minutes which included torquing the 4 bots to 60 PSI. Hitch installed perfectly as advertise and could not be more pleased with the product. I also ordered one of the 2 inch baskets on their website for transportation items under 500 lbs. I will surely save this website and without a doubt be the place I look first for any hitch or transport items.



by:

works fine on my 2011 Santa Fe



by:
2012 Kia Sorento

Well built, quick to go on..10 minutes from box to SUV



by:

Well made installs in minates. Do it yourself! Save money!



by:

fast shipment took twenty minutes to put on the car



by:

Quality product, installed unit by myself in approx 30 minutes...



by:

Easy to order, quick delivery and easy to install.



by:

Hitch is well built and solid. Fit perfectly.



by:
2011 Kia Sorento

The hitch looks real good , I will install it soon.

Very fast service, Thank You.



by:

Easy to install (I did it alone), looks great.



by:
2011 Kia Sorento

Prompt order processing and delivery. Product was as stated.



by:

Product arrived in 2 days. Very good instructions and video was a help.



by:

Took no more than 20 minutes to install. All holes lined up no problems.



by:
2010 Hyundai Santa Fe

Great quality product. Bolted right on just as advertised.



by:

WOW!!! American made with the best of American service. Thank You
Vance



by:

Strong, reliable, perfect fit.....Have patience around the muffler...it fits!


25
473
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Hitch and Wiring Bracket Installation Instructions, Weight Capacities 2011 Kia Sorento 4 Cylinder
    To make this easy and clear, I will just answer your questions with numbered answers below. 1. According to the instructions for Draw-Tite hitch 75684, you will not have to remove or lower the spare tire in order to install the hitch. I have included a link to the instructions below. 2. The shorter bracket, part # 18140, should be sufficient. With it you will need the bracket that holds the 4-Way flat, part # 18144. 3. The cross-tube of the hitch on the passenger side is bent to allow...
    view full answer...
  • Recommended Heavy Duty Trailer Hitch for a 2010 Ford F-150 With a Factory Hitch
    With there already being a factory hitch installed on your 2010 Ford F-150, we do have an option to up the tongue weight capacity. That being said, there are no Class V hitches that we have available for your vehicle, so this will be a Class IV hitch as well. The TorkLift SuperHitch # TLF1005H is rated up to 1,500 pounds when used with a weight distribution system. The only problem with this hitch is that it sits under the factory hitch, which will affect how the weight distribution hitch...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch Receiver For 2012 KIA Sorento To Use With Carpod Cargo Carrier
    I recommend that you upgrade your trailer hitch to the 2 inch Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III # 75684. This hitch will allow you to use the Carpod with a much more reasonable cargo load. The 24x48-3/4 Carpod Walled, Folding Cargo Carrier - 2" Hitches - w/ Lid, Bag, Rise Shank - 450 lbs # M2205-01-02 has a total weight of 54 lbs. This carrier will have a very limited weight capacity when you use an adapter like the # HTAD from your 1-1/4 inch hitch...
    view full answer...
    Image 1 for
  • Comparing Curt and Draw-Tite Trailer Hitches for a 2013 Kia Sorento SX
    The third attachment point for Curt trailer hitch # C13073 for your 2013 Kia Sorento SX might help to keep the hitch from rotating but it is more there out of necessity due to the L-shaped frame brackets. That design is no more or less beneficial than trailer hitch # 75684 with its 4 total attachment points. Trailer hitch # 75684 is actually more versatile since it is rated for use with weight distribution whereas Curt hitch C13073 is not, even with its additional bolts. And if you were...
    view full answer...
  • Is Draw-Tite Trailer Hitch 75684 For 2011 Kia Sorento a Class 3 or Class IV Hitch?
    The Draw-Tite # 75684 you were looking at is a Class 3 hitch, not a class IV and would be the correct option for your 2011 Kia Sorento. If you're going to be towing you'll also want to pick up a wiring harness # C56332 if you have the factory tow package v6 engine, or # C56328 if you have an I4 engine.
    view full answer...
  • Troubleshooting Hard to Thread Install Bolts for a Hitch on a 2012 Kia Sorento
    Before we determine that you have the wrong size install bolts you need to make sure that the bolts not fitting isn't due to the weld nuts of your vehicle being dirty/corroded and that is why they won't fit. Typically on vehicles that have seen a few winters the weldnuts can be a bit dirty/corroded so bolts will not just thread right into them. Check out the links I attached that detail how to clean the weld nuts. The 10.9 on the bolt head is not the size of it.
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch and Wiring for 2011 Hyundai Santa Fe with Spare Tire Under Vehicle
    Both the Curt Class III Round Tube Receiver Hitch # C13073 and Draw-Tite Class III Max Frame Receiver Hitch # 75684 are confirmed to fit your 2011 Hyundai Santa Fe as long as it does not have the dual exhaust. Because of its cross tube design, the Curt Class III # C13073 is going to allow for easier access to the spare tire mounted under the vehicle. I have attached a couple of images so you can better see the comparison between the two hitches. The Curt Hitch is a great option for your...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Wiring Harness and Hitch for a 2011 Kia Sorento
    I would be happy to help you. The best wiring harness for your 2011 Kia Sorento is going to be the Tekonsha T-One Vehicle Wiring Harness item # 118506. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the tail lights. It will provide you with a 4-flat connector. Our system can be confusing sometimes with different models but this fits every 2011 Sorento without the factory towing package The Draw-Tite Trailer Hitch item # 75684 you were...
    view full answer...
  • Is Fascia Trimming Required to Install Draw-Tite 75684 on 2013 Kia Sorento SX
    The Curt Class III hitch # C13073 can require fascia trimming on some versions of the 2013 Kia Sorento SX as you noted. The Draw-Tite # 75684 does NOT require fascia trimming. I reviewed the installation instructions for 75684, which are linked for you, and there is no mention of this requirement for installing this hitch. My contact at Draw-Tite confirmed. The linked video illustrates the entire process on a 2013 Sorento. Hitch installation requires mostly basic hand tools but a torque...
    view full answer...
  • Can 2012 Kia Sorento Hatch Be Opened and Closed with Yakima HangOut Y02638 In Place
    Yakima specifically states in the installation instructions that the hatch or trunk should not be used while the rack is installed. The extra weight of the rack when it is in place can damage the vehicle when opening and closing the hatch, especially in the case of an SUV when the rack is in contact with the glass of the hatch. You'll also want to consider that the struts that hold the rear hatch open are usually not rated for much more than the weight of the hatch itself. Having any extra...
    view full answer...
  • Weight Distribution and Sway Control for a 2012 Hyundai Santa Fe and 1,890 Pound Trailer
    The first thing to check is if the hitch and vehicle are rated for use with weight distribution. For the trailer hitch there should be a sticker on it. If rated for weight distribution it will have 2 sets of capacities; one set for weight carrying (not using weight distribution) and another for weight distributing. If the hitch does not have a separate capacity for weight distributing then you would need a hitch that does such as # 75684. For the vehicle just check the towing section in...
    view full answer...
  • What Size are the Trailer Hitch Receiver Bolts and Weld Nuts on a 2012 Hyundai Santa Fe
    The weld nuts in your 2012 Hyundai Santa Fe will use Grade 5 bolts that are M10- 1.25 x 30. There is also another bolt, washer, and nut on each side required for the installation of the Curt # C13073. The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75684 will only use those four bolts and washers.
    view full answer...
  • Can Trailer Tongue Weight be Changed Just by Moving Weight Around in the Trailer
    The trailer tongue weight or hitch weight is dynamic meaning that it will change as weight is added or removed from the trailer or if the weight in the trailer is moved around (front to back). You can manipulate the tongue weight by moving weight more to the back of the trailer for less tongue weight or more towards the front for more tongue weight. However, the tongue weight should be 10 to 15 percent of the gross trailer weight. And when using weight distribution there are different...
    view full answer...
  • Bike Rack Solution for 2013 Kia Sorento to Allow Access to Rear Hatch Area
    We can't recommend opening the hatch or trunk of any vehicle with a trunk mounted bike rack installed including the Thule Passage part # TH910XT that you mentioned. The weight of the rack would prevent the struts from holding the hatch open which would cause it to slam down hard which would potentially cause an injury. To have complete rear cargo area access with a bike rack (and even bikes) loaded what you'd need is a swinging bike rack like the Thule Apex Swing part # TH9027XT which...
    view full answer...
  • How to Determine if 2012 Kia Sorento Has Factory Tow Package
    For a hitch, I'd recommend going with the Draw-Tite Class III hitch, part # 75684 instead of the Curt hitch you mentioned. The Curt hitch warranty requirements state that a stabilizing strap like part # 18050 must be used for non trailer loads like bike racks or cargo carriers. Unfortunately, the small spoiler atop the rear hatch of your Sorento can be damaged by the strap which is why I recommend a different hitch. The Draw-Tite model will fit all models of the 2012 Sorento, regardless...
    view full answer...
    Image 1 for
  • Is Drilling Required to Install Draw-Tite Trailer Hitch on 2012 Hyundai Santa Fe
    To install the Draw-Tite Class III Max Frame Receiver Hitch # 75684 that you referenced there are 2 bolts per side used for installation on your 2012 Hyundai Santa Fe. You will not need to drill any holes in the trailer hitch for installation, the bolt holes are already drilled in the trailer hitch. I have attached a photo that illustrates the pre-drilled bolt holes. The hitch will install into pre-drilled weld-nuts in the frame of your vehicle. You will not need to drill holes to install...
    view full answer...
    Image 1 for
  • Maximum Tow Capacity of 2012 Kia Sorento w/ 4 Cylinder Engine
    According to the owner's manual for your vehicle, the maximum towing capacity of the 2.4L 4 cylinder engine would be 1650 lbs. For the 3.5L 6 cylinder model, the maximum towing capacity is 3500 lbs if the trailer has brakes and the vehicle has a brake controller installed to operate them. The Draw-Tite # 75684 hitch you referenced has plenty of capacity at 3500 lbs, but because the vehicle's tow capacity is much lower the lowest capacity should be followed. You'd be best served by using...
    view full answer...
  • Recommended Towing System for 2013 Kia Sorento V6 with Transmission Cooler
    For your 2013 Kia Sorento, the towing capacity is 3500 lb for the V6 models. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75684 for your trailer hitch receiver. This will give you a 2 inch receiver opening that will give you many more options for ball mounts and other accessories for your Sorento. For your wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118506. This T-One connector plugs into...
    view full answer...
  • Recommended Trailer Hitch and Wiring for a 2010 Hyundai Santa Fe
    I recommend going with the Draw-Tite Trailer Hitch # 75684 which is a Class III hitch with a 2" receiver. This trailer hitch will fit your 2010 Hyundai Santa Fe as long as you don't have the dual exhaust and it doesn't requiring cutting of your rear fascia like the Curt trailer hitch does. Then for wiring I recommend the Tekonsha T-One as we have found the Tekonsha wiring products to be the most reliable. If you have the factory tow package use part # 118258 otherwise you need part #...
    view full answer...
    Image 1 for
  • Troubleshooting Install Bolts of Draw Tite Hitch that Don't Want to Thread In 2011 Hyundai Santa Fe
    Although it is possible that you do not have the correct bolts, I believe you will find that they will fit just fine if you would clean the bolt holes before installing them. This a pretty common problem and in basically every situation cleaning out the weld nuts is all that's needed to get the bolts to fit. Try soaking those nuts that are welded into the frame with a spray lubricant such as WD 40. Let the lubricant sit for several minutes, then scrub thoroughly with a wire brush. The...
    view full answer...
  • How to Reduce Rear Suspension Sag of 2013 Kia Sorento
    Unfortunately, we don't offer any rear suspension enhancement products for a 2013 Kia Sorento, nor would I be able to determine the spring rate of the OEM springs, however I still might be able to help. , If the sag in the rear end is being caused by the tongue weight of a trailer, then a weight distribution system would be a more effective way of managing the rear ride height of your Sorento, you'll just want to make sure you're using a hitch that's compatible with weight distribution...
    view full answer...
  • Trailer Hitch & Wiring Harness For 2011 Hyundai Santa Fe Limited to Tow Boat Trailer
    The best I can give you is a maybe because you didn't say how much the bass boat and trailer weigh, or if you have the tow package or not. So if your 2011 Hyundai Santa Fe does not have the tow package it has a 2,000 lb towing capacity; with the tow package it has a 2,800 lb tow capacity. So if your bass boat and trailer weight that or less, you can tow it. For that you will need the following: - Draw-Tite Max-Frame Trailer Hitch Receiver # 75684 And - WITHOUT Tow Package: T-One Vehicle...
    view full answer...
  • Trouble Installing Draw-Tite Receiver On 2011 Kia Sorento With Corrosion In Factory Threaded Insert
    As the Draw-Tite Max-Frame Trailer Hitch Receiver # 75684 was designed and tested using the threaded frame inserts, it is the only acceptable method for mounting the receiver to your 2011 Kia Sorento. You may be able to tap the holes with a M10-1.25 tap to clean out the threads and be able to mount the receiver. But in the event the threads are to far gone they would need to be replaced with new weld nuts.
    view full answer...
  • Weight Distribution System for 2015 Amerilite Coachman Towed by Kia Sorento
    Based on the dry weight of your 2015 Amerilite Coachman and the towing capacities of the hitches that fit your 2013 Kia Sorento like the # 75684 the Fastway kit part # FA94-00-0600 that you referenced is rated great for your setup, but I'd recommend the trunnion version # FA92-00-0600 since it will offer better ground clearance and your Sorento sits pretty low to the ground. I attached a review video for this system for you to check out as well. For a hitch ball then you'd need the part...
    view full answer...


< Previous
123. . .5




Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Andrew S
Test Fit:
Andrew S
Employee Brent H
Test Fit:
Brent H
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Patrick B
Video Edited:
Patrick B
Employee Dustin K
Video Edited:
Dustin K
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


Product Experts Available Now!
Call 1-800-940-8924
<