We'll connect you with nearby partnered installers who know this exact setup.

CURT

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Part Number: C12058

61 Reviews | 7 Questions

In Stock

$300.50

Retail:$531.95

You Save: $231.45

Not Confirmed to Fit

2003 Ford Focus

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

curt trailer hitch receiver - custom fit class ii 1-1/4 inch

curt trailer hitch for towing receiver - custom fit class ii 1-1/4 inch

Show All (5) Product Images

Show Fewer Product Images

In Use/Installed

2004 cadillac deville trailer hitch curt for towing c12058

2004 cadillac deville trailer hitch curt for towing receiver - custom fit class ii 1-1/4 inch

2004 cadillac deville trailer hitch curt class ii on a vehicle

2004 cadillac deville trailer hitch curt for towing on a vehicle

2004 cadillac deville trailer hitch curt c12058

2004 cadillac deville trailer hitch curt for towing class ii receiver - custom fit 1-1/4 inch

2004 cadillac deville trailer hitch curt for towing class ii on a vehicle

2004 cadillac deville trailer hitch curt class ii c12058

Show All (15) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" customer photo

Show All (2) Customer Images

Show Fewer Customer Images

Videos

How to Set Up Your Curt Trailer Hitch Receiver on a 2004 Cadillac DeVille

Show All (1) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number C12058 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (61)
Q & A (0)
Related Parts
Photos

CURT Trailer Hitch - C12058

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Tows up to 3,500 lbs (GTW): Handles light-duty trailers, boats, and small campers safely
Supports 350 lbs (TW): Works with bike racks and cargo carriers without added stress
Bolt-On Installation: Mounts using included hardware—no welding or drilling required
Durable Steel Build: Fully welded, square-tube design ensures long-term strength
Gloss Black Powder Coat: Protective base coat resists rust for lasting clean appearance

Features to know about

Add Towing Capability for Small Trailers and Gear: Class II 1-1/4" Hitch Receiver

This Curt Trailer Hitch Receiver adds solid utility for light-duty towing. With a 3,500-lb maximum gross trailer weight and a 350-lb maximum tongue weight, it’s ready for small utility trailers, boats, or extra cargo loads. The Class II rating and 1-1/4" x 1-1/4" receiver opening give you the strength and stability needed for everyday hauling without overbuilding or adding bulk.

Confident DIY Mounting: Bolt-On Installation with Included Hardware

You don’t need a lift or weld shop to get this hitch installed. It uses a bolt-on design that lines up to existing points on the vehicle, and the complete hardware kit comes in the box. The fully welded construction keeps everything square and secure once tightened down, so home installers can get it done with standard hand tools and patience in the driveway.

Built to Last Through Weather and Road Grit: Powder-Coated Steel Frame

The sturdy square-tube body is made from steel with a gloss black powder coat over a protective base coat. That layered finish resists rust and chips, keeping the hitch looking good and ready for years of use. Robotic welding ensures consistent strength at every joint, so the receiver stays true even after thousands of miles of towing or carrying bike racks and cargo trays.

12058 Curt Class 2 Trailer Hitch Receiver

Installation Details C12058 Installation instructions

This Product Fits The Following Vehicles

2000 - 2005 Cadillac DeVille
2006 - 2011 Cadillac DTS

Customer Satisfaction Score:

95% were satisfied with this product

5% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Did not arrive in time

5% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Did not arrive in time

4.8

61 reviews

5 Stars		(48)
4 Stars		(11)
3 Stars		(2)
2 Stars		(0)
1 Star		(0)

by: Drew 02/25/2019 One Year Later

2008 Cadillac DTS

Put it on my mom's Caddy for my dad's hoveround chair lift. Install was pretty easy and hitch looks good.

Click to Enlarge

Mike L.

2/26/2019

Please keep in mind that the hitch has a tongue weight maximum amount of downward force that can safely be applied capacity of 350 lbs. The weight of the chair and its carrier should not exceed 350 lbs.

by: Jennifer 05/08/2026

2005 Cadillac DeVille

Receiver arrived quickly and as described. Installed very easily and quickly. As far as longevity I'll have to update later.

by: Ray 10/06/2026

2009 Cadillac DTS

It was a perfect fit

by: Jerry Pierce 08/16/2017

2006 Cadillac DTS

Item arrived a day early, well packaged, installed same day, good fit. Hitch is hidden even better than I expected.

Click to Enlarge

by: Brooks 06/17/2025

Pontiac Trans Sport Van

Nice product and I'm enjoying the mobility I now have with being able to transport my scooter. All thanks to your hitch making this happen.
Thankyou

by: Sherry 05/21/2025

WOW! TERRIFIC! Easiest hitch to install we've ever encountered. Curt did it right..., and it looks great (you have to really look hard to even see it at all) on the vehicle. Towed 3,500 lbs. like a ghost/dream as had to keep checking the mirrors to make sure it was still back there.

by: Phillip A. 11/20/2016 One Year Later

2005 Cadillac DeVille

I am 70 years old, and for all of the rest of my life I have welded together my trailer hitches. This hitch was the second I purchased from etrailer. The first was 3 years ago for a 2002 Buick, and I was amazed how easy it went on and how substantial the ready made hitch was.
My most recent hitch was for a 2005 Cadillac Deville. This went on even easier than the Buick and the fit was perfect. Although the hitch on the Cadillac is only for my wife's wheel chair (non powered) I feel the hitch is sturdy enough for any trailer the Cadillac is designed to pull. The hitch is almost invisible and does not detract from the looks of my car.

by: Edward in S.E. Michigan 07/26/2019 One Year Later

The hitch receiver and ball mount arrived together and much faster than I would have expected (2 days). When there was a question about installation (I did it myself) customer service answered my question quickly and it all came together fast. I could not have been happier with the whole experience. The whole unit has been working just fine, as expected. And the price is hard to beat.

by: Duane 04/25/2025

Package showed up in 2 days as I was told. No damage.
Ordered on line and would have preferred to talk to an agent to make sure that I was buying the correct hitch.

by: Carl 06/01/2011

on the same day. Quick and easy tracking and delivery. Once I had them I was pleased to see that I had all the hardware as some places are fairly forgettful in that department. When preparing to do the install I chose to toss the blueprints that came with the hitches and use the online instructional videos created by etrailer.com. I was pleased with how clear the instruction and camera work was. It literally made installing these hitches a breeze. Easiest install I have done yet. Thanks etrailer.com for making this process such an easy experience!

Carl
South Dakota

by: Witold N. 08/11/2014

2008 Cadillac DTS

The hitch appeared to be very easy to install and all parts fit perfectly well.The printed instruction and specially video were very helpful. The wire feeder worked very well, but should be slightly longer. Above all, it looks very nice on my 2008 Cadillac DTS and is barely visible. It is great product from great company. Thanks.

by: Michael H. 08/21/2018

2005 Cadillac DeVille

Pretty straight forward. Curt hitch, how can you go wrong? Heavy duty construction, easy install. etrailer...great company. Packaged arrived when they estimated, which was quicker than I thought, and shipped for free. Will be consulting and buying a bike rack here. Huge selection and very knowledgeable about the products they carry. Do not hesitate to buy from etrailer.

by: 03 Deville 04/06/2019

2003 Cadillac DeVille

heavy duty. the wire in the kit is totally awesome! it works very well! very pleased with it. installed my myself. it was a little cumbersome, but I did it. the bar is not as wide as the frame, it has to be stretched. I suggest threading the two hang down bolts before trying to install. Leave the wire on one bolt while mounting the other side first. Once one side is holding up with the small bolt and the hang down bolt, tighten up the other side small bolt to line up the hang down bolt...without the wire still attached, it may go back up inside and be lost. I had to purchase another bolt because of that mistake. work with tightening and loosening the bolts until both sides are pulled up tight. the last two front bolts are a piece of cake after that...

by: Jerry 07/21/2016

2006 Cadillac DTS

Everything arrived on time as expected. Installation was easy. I would recommend reviewing the installation video. It was very informative. I was able to install the hitch without lowering the exhaust.

by: Lee 09/20/2017

2011 Cadillac DTS

The installation videos are terrific and make it easy to install. They are specific to my car. Just perfect.

by: Frankree 07/05/2020 One Year Later

NICE HITCH.. VERY STRONG AND MOUNTS SECURE.. NOT ANY PROBLEMS WHAT SO EVER.. I RECOMMEND THIS HITCH

by: JACOB 02/24/2014

EASY TO INSTALL EVERY THING FIT VERY GOOD ONLY TOOK ABOUT 1/2 HR THIS MAKES 4 TH HITCH I BOUGHT FROM THEM. SHIPPING WAS FASTER THEN I EXPECTED GREAT COMPANY TO DO BUSNESS WITH

by: Steve H. 05/14/2012

it had the 2" receiver option without a converter that drops the weight 50%.

by: Rob 12/27/2018

2011 Cadillac DTS

The product came on time as stated. Very happy with the quality of hitch. The video at the website was very helpful. Was able to install by my self in about 1 1/2. I will buy from etrailer again.

by: Mickey 10/20/2017

Excellent service, fast shipping, fits perfect, did not drop the exhaust.

by: Mike N 09/06/2024

Item better than described and super easy to install. I highly recommend this hitch.

by: KEN DENNIS 09/23/2011

vehicle with NO welding necessary!!!PERFECT!! Shipping was INCREDIBLY fast also!!
More than satisfied!!!

by: William 12/19/2017 One Year Later

fit well, easy installation!

by: Tom 09/17/2015

2000 Cadillac DeVille

This is the second purchase I have made from these people and the experience has been fantastic for both of them. I had the product within a week of the day I ordered it and it came when they said it was going to and they told me what time I was going to get there and it did it it was perfect. Excellent place to do business with thank you so much.

by: James 06/27/2020

My only complaint is that instructions need be a little more detailed for those of us that have never installed this product before!

true

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

Do you have a question about this Trailer Hitch?

Trailer Hitch Options for the 2006 Cadillac SRX, CTS, DTS, STS, Escalade and Escalade EXT
If you have a 2006 Cadillac SRX then you can use Curt hitch # C13050 or Draw-Tite hitch # 75174. If you have a 2006 Cadillac CTS or STS you can use Draw-Tite # 24767 or Curt # C11307 which are both Class I, 1-1/4 inch hitches. If you have a 2006 Cadillac DTS you can use # 36287 or # C12058 which are both Class II, 1-1/4 inch hitches. If you have a 2006 Cadillac Escalade or Escalade EXT you can use Class III hitch # C13422 or Class V hitch # C15324. If you have a 2006 Cadillac XLR there...
view full answer...
Which Hitch is Better for a 2008 Cadillac DTS?
I would be happy to help you. Both the Curt item # C12058 and the Draw-Tite item # 36287 trailer hitches are confirmed to fit your 2008 Cadillac DTS. The hitches are identical in everyway except for the name stamped on them. They have the same capacity, installation method, and dimensions. I recommend going with whichever one is the least expensive. The Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118535 you were looking at is confirmed to fit your...
view full answer...
Can I Tow a 17 Foot Boat with a 2002 Cadillac DeVille
You must abide by the weight capacity of the hitch or vehicle, whichever is lowest. Adding air shocks or springs will not increase the capacity of the hitch and, unless Cadillac has specified, it will not increase the towing capacity of the DeVille. Check the owner manual to see what the towing capacities of the car are. This Curt hitch, part # 12058, will fit a 2002 Cadillac DeVille and it has gross trailer weight capacity of 3500 pounds and a maximum tongue weight of 350 pounds. If the...
view full answer...
Can 2009 Cadillac DTS Tow Trailer
Hey Dan, it looks like the 2009 Cadillac DTS has a towing capacity of 1000 lbs so as long as the trailer weighs less than that it could tow a trailer. We have a trailer hitch that fits your vehicle with the Curt # C12058 and then for trailer wiring you'd need the part # 118535 as well.
view full answer...
Why is There Only 1-1/4 inch Hitch Available for 2007 Cadillac DTS
Class III hitches that have a 2 inch opening are normally only used on higher capacity vehicles like trucks and SUVs. For your 2007 Cadillac DTS we have Class II hitches with 1-1/4 inch opening due to it being a lower capacity vehicle overall. For that we have the Curt # C12058 which has higher capacities for a Class II hitch and although is the smaller hitch size has the same weight capacities as Class III hitches at 350 lb tongue weight and 3,500 lb trailer towing weight.
view full answer...
Trailer Hitch Options for a 2004 Cadillac DeVille
The only trailer hitches available for the 2004 Cadillac DeVille are Class II trailer hitches. I have included a link to them for you to the right. I am assuming you need a Class III hitch because you need the 2 inch receiver for an accessory of some kind. You may be able to still use a 2 inch accessory by using an adapter, # HTAD, but keep in mind that the use of an adapter reduces the tongue weight capacity of the trailer hitch by 50 percent. Curt hitch # C12058 has the highest tongue...
view full answer...
Hitch Recommendation for a 2002 Cadillac Deville
Yes, this Curt Trailer Hitch Receiver with Drawbar, part # 12058, will work on a 2002 Cadillac DeVille as it is designed to work on 2000-2005 Cadillac DeVilles. You may also be interested the following products to complete your towing setup: Wiring for the 2005 DeVille by Cadillac, part # C59496 Hitch Ball with 2 inch Diameter and Medium Shank, 3,500 lbs GTW - Stainless Steel, part # A-82 Hitch Ball with 1-7/8 inch Diameter and Medium Shank, 2,000 lbs GTW - Stainless Steel, part # A-80
view full answer...

Do you have a question about this Trailer Hitch?

Info for this part was:

Written by:

Lindsey S

Expert Research:

Patrick B

Expert Research:

Jameson C

Video Edited:

Joshua S

Video by:

Chris R

Updated by:

Wilson B

Updated by:

Kristina F

Updated by:

Isabelle B

Test Fit:

Jared G

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.