2015 Jeep Wrangler Unlimited Roof Rack by Yakima
Roof Rack Includes:
Yakima RoundBar Crossbars - Steel - Black - 58" Long - Qty 2
Yakima 1A Raingutter Towers - Qty 4
Part Numbers: Y00409,Y00101
Our Price: $374.89
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Yakima RoundBar Crossbars - Steel - Black - 58" Long - Qty 2
part number: Y00409
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.
Features:
- Sturdy, round crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers, fit kit, and RoundBar SL Adapter (sold separately) to create a complete roof rack
- Accommodate accessories that clamp around the bars
- Optional RoundBar end caps (sold separately) keep out dirt and grime
- Constructed from vinyl-coated, galvanized steel
Specs:
- Quantity: 2 crossbars
- Dimensions: 58" long x 1-1/8" diameter
- Limited lifetime warranty
8000409 Yakima Round Crossbars - Steel - Black - 58" Long - Qty 2
Item # Y00409
Yakima 1A Raingutter Towers - Qty 4
part number: Y00101
For vehicles with rain gutters, start building your Yakima roof rack system with these 1A Raingutter Towers. Towers provide the base for your system, attaching to traditional rain gutters and holding crossbars (sold separately) in place.
Features:
- Clamp onto vehicle rain gutters
- Provide base for Yakima roof-rack crossbars
- Adjust to non-parallel rain gutters
- Are lockable with Same Key System (SKS) Cores (sold separately)
- Cores lock crossbars to towers and towers to vehicle roof
- SKS Cores can be changed out to make all your Yakima locks keyed alike
- Constructed from tough Zytel nylon
Specs:
- Quantity: 4 towers
- Weight capacity: 165 lbs
- Always observe your vehicle's maximum roof load capacity
- Additional components required for a complete roof-rack system:
- Crossbars (sold separately) to provide attachment point for accessories
- SKS Cores required: 4
- Height: 7-1/4"
- Can be increased by 3-1/2" by 1A HiRise Spacers (Y01101), sold separately
- Lifetime warranty
8000101 Yakima 1A Raingutter Towers (QTY 4)
Video of Yakima RoundBar Crossbars - Steel - Black - 58" Long - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Roof Rack Review - 2020 Jeep Wrangler Unlimited
Carla: Hey guys, Carla here with etrailer.com. Today we're going to be taking a look at the Yakima RoundBar Gutter Mount Roof Rack System on our 2020 Jeep Wrangler. This roof rack right here, if you're going for more of a rugged look, this is definitely the way to go with the round bars. A lot of customers are used to that look and it looks pretty cool on a Jeep. Let's go ahead and take a closer look at it.One thing I want to point out, as per the instructions, you do want to install both bars on the non-removable portion of your top. As you can see, this right here divides the front portion that is removable.
So you can leave your hard top on, but remove this portion. You don't want to put the bars on the front.All right. Basically what we have right here is an outer clip. As you can see it as rubberized, so you don't have to worry about any scratches.On the inside we have sort of what looks like a wedge that's going to fit right inside your rain gutter, and it does have these nice pads. Again, rubberized to avoid any damage or scratching to your rain gutters on your top.What we've got right here in the center is an actual knob.
How it works is as you're tightening this down, it's pushing the two together, pinching your rain gutter and securing it to your roof.Right in the center here, what we've got is a spot where you can use the Yakima Same Key System. Not only will that secure your roof rack to your top, but it also allows you to use the same key if you've got other Yakima accessories.Right up here, we've got our 58 inch round bar. It's a steel bar, so it's very, very sturdy. As you can see, it adds a really cool, rugged look to the Jeep. There is one bolt in the center here that I can show you here in a little bit, and that's going to tighten down and make sure that your bars are not going to be able to slide once you have them set in place.All right, right in here, we've got our bolt and that's the bolt that I was talking to you about earlier.
The first step to get this on there would be to use this tool. Even though it is included, you can see it's kind of hard to get in there. Especially if you're coming from the bottom, you don't really have a step stool, it's kind of hard to get in there. If you are looking for something that's a little bit easier to install, if you plan on putting it on and off quite a bit, then Thule does have one that doesn't require any tools and you can just adjust it from the outside.That being said, let me go ahead and give you some measurements that you may be wondering about for this system. If you have RoundBar accessories already, or you plan on getting those, you're going to want to know your clearance right here from the bottom of the round bar to the top of your Jeep top.
From right here to this portion, we're right at about three inches. That's the space you have, so really good amount of space to be able to put any kind of accessory. Other than that, these bars do have a weight capacity of 165 pounds, but you do want to double check and make sure you're not exceeding the capacity of your top.Now that we've gone over some of the details, let's go ahead and show you how to put this on. I'm going to show you how to assemble your rain gutter foot right here. We have it partly assembled on this side. What you're going to want to do with the first step is go ahead and put these rubber pieces on the inside right here of this foot, just like this. Might need to stretch them out a little bit to get them up and over, and push them all the way in. Just like that. What this is going to do is going to prevent anything from scratching the rain gutter on your top. This piece right here is already rubberized, so these two, make sure that there's no contact that's not rubberized, all right.The next thing we want to do before we want to slide our foot on the bar, we got to loosen the bolt, which is right in here. This bolt right here, we're going to loosen it up so we can get this on the bar. This is an included tool that comes with it. So we're just going to go ahead and loosen it up. Now we can do it with our hand. As you can see, this piece moves and allows that hole to open up to accept our bar, just like that.All right, with that in place, we want to make sure that we insert it with this clamp or clip on the outside and it slides right over. Then you want to get it started with your hand too, so that it's a little bit easier to work with. I'm going to go ahead and start tightening it down here a little bit. But not too tight because you still want it to slide.All right, what you want to do is go ahead and put your end caps in now, just so that when we go up there to fit it on, you don't have the feet sliding off of the bar. I'll go ahead and throw them on. And with that on there we'll go ahead and throw this on top.All right. What you want to make sure is that your rain gutter right here is going be in between these two, in between the foot and the clip, just like this. Once that's on there, you can see, I can still adjust the bar. I'm going to go on the other side and make sure that we have it in the exact same position. Now you do want to measure your overhang, and that's going to be the overhang of the bar coming out of these legs to make sure that they're the same on both sides.At this point, before you tighten anything down, you want to go ahead and also measure your crossbar spread, and that's going to be dependent on your accessory. So whatever your accessory requires, you want to go ahead and measure from the center of the bar to the center of the other bar. Now there is a maximum crossbar spread of 60 inches on this one, and there's really not a minimum one, but we tend to recommend not going anything smaller than 24 inches, as most accessories are going to require a little bit longer than that. With that in place, we'll go ahead and use the included tool to tighten down our bar.At this point, if you do have access to a ratchet, it's probably the best time to pull it out so that you can save time doing this. Otherwise, you can keep using this tool, just take a little bit longer time. While you're tightening this, you want to make sure you push on the clip on the outside so that it doesn't touch, so that there's still a gap between it and your top.As we're tightening this bolt down, you may notice your metal piece on the foot starting to come apart from this. What you want to do is go ahead and pull this to this position so that when it's tightening down, it goes down smoothly.Even after turning this a couple of times, I could tell that it was still quite loose, so I found an easier way of going about it. Again, while you pull this up, I'm going to go ahead and use my fingers on both sides to just turn the nut on here. Once you can't turn it anymore with your fingers, then you can go ahead and finish using the tool here. Just finish up tightening this where your bar is secure on the foot. We'll go ahead and repeat the process on the other side.All right. So our next step is going to be to thread our tool right here, our nut. What you want to do is push up on this to make sure that it is making full contact with the bottom of this rail. When you do that, it pulls the clamp together. If you can see right in here, we still have a gap. We're really not touching the edge of our top.In some applications, when you do tighten this all the way down, you get close to it and you may have some contact. If that is the case, if it's still touching when you're pressing down on this and trying to keep it straight, Yakima does provide this protective plastic piece. What that would look like is you would just clamp it on the inside here, but like I said, we don't need it for this cheap application.We'll go ahead and tighten and you do want to alternate, on the other side, tightening. So I'll leave this, not all the way tightened, I'll go on the other side, and then come back and finish it up.So we'll finish tightening this up. Real quick, if you can see right down here, there's a screw. That screw does have to be pushed all the way in flush with this, to be able to allow you to turn this all the way in. You don't want to overtighten this, just turn it by hand. If you feel like there's not enough for one whole turn, you can stop right there. As you can see, it's very secure.Now that we've installed our roof rack, I will go ahead and give it a good shake. You can see how the entire car is moving, so it's on there very well. And now we can throw our skis or boards up there and hit the road.
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Yakima RoundBar Crossbars - Steel - Black - 58" Long - Qty 2 - Y00409
Yakima 1A Raingutter Towers - Qty 4 - Y00101
Average Customer Rating: 4.8 out of 5 stars (15806 Customer Reviews)
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack. For vehicles with rain gutters, start building your Yakima roof rack system with these 1A Raingutter Towers. Towers provide the base for your system, attaching to traditional rain gutters and holding crossbars (sold separately) in place.by: John K08/17/2012
Honda Element
Free delivery that showed up in 3 days!!! Can't beat it. The crossbars with the Control Towers and LandingPad 9 fit perfectly on my Honda Element. Had them installed in about 30 mins. Don't have my cargo box yet and wanted to test strength, so I had my 110lb wife standing on them with no issues (yes, the car was parked). Plan to take a long camping trip next week with a cargo box on top...wife will be in the vehicle:-)
by: steve Z06/16/2012
1994 BMW 5 Series
roof racks showed up in great condition, and showed up as one package.... I should have ordered the J racks from here but I found them cheaper locally so Thule J racks compliment the whole setup and i am just about ready to hit the water :)
by: Paul D.08/19/2012
A great company to do business with, and lots of merchandise in stock. I orderd a roof rack for my truck on Tuesday morning and it was on the porch when I returned from work on Thursday. I will deffinitely order more from etrailer.com
by: Todd04/06/2022
Thank again, etrailer. You always have what I’m looking for. I already had the bars, but I needed the towers.
by: Shaun05/16/2020
2017 Chevrolet Express Van
etrailer never disappoints! Every product I need, I check that etrailer has it before purchasing anywhere else. Thank you for the excellent service, the fast delivery, and the email updates on order status.
by: Keith05/10/2020
Fits awesome on my 2016 jeep unlimited. Some wind noise but not a problem.
by: Stephen F.07/23/2019
Yakima Crossbars were as you would expect - steel bars coated in a soft black coating (be mindful when you are utilizing these with the top mounts as the clamp will eat through the soft coating when you tighten them down). I had issues with my yakima round bar setup as the brackets and tower system were allowing water to leak in. This is in no way reflective of what youll experience but Yakima has superb support. I spoke with them twice on my issue and out of their kindness they shipped me an entire setup to replace my existing one for free.
by: Barry 02/20/2024
Dodge
Fit the 79 Dodge van perfectly
by: Lee11/22/2021
The roof rack is great. Solid.
by: Pat G08/29/2013
Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash.
Will definitely be doing business with you all again.
by: Lawrence B08/17/2017
Toyota Prius
I ordered a Yakima Roof Rack for my Toyota Prius from eTrailer.com. Part of the reason for purchasing from eTrailer.com was the promise that the racks were made specifically for the car and would not dent the roof.
I received the rack on July 31, and installed the racks on my Prius according to instructions included with the racks. Our tandem kayak is 65 lbs . The towers were placed on the outer most part of the roof as indicated by the instructions. Yakima saddles were attached to the crossbars to hold the kayak. Nothing was close or touching the top of the roof. We transported the kayak to a nearby lake, 6 miles, and back. The next day we removed the racks from the roof and noticed 4 dents on the top of the roof. It was obvious that transporting the kayak on the rack caused the dents.
We had to pay $100 to have the dents removed from the Prius roof.
I cannot continue to use this rack that puts dents in the car's roof. I was extremely disappointed in the racks. In reading the Toyota manual and contacting them by phone, there is no mention of using or not using roof racks.
I was shocked to learn from Rachel at eTrailer.com that your company takes absolutely no responsibility for this Yakima product they sell. The best they can do is to pass the buck and refer us to Yakima.
Very disappointed, and out a lot of money for a product that damages your car. Will not recommend or buy here again. eTrailer.com does not even deserve one star in this review.
by: John04/13/2019
Typical Yakima cross bars. Coating is a little too easy to cut or gouge, but probably needs to be that way to get the grip it provides. Good enough solution for me, and allows me to continue to use all the attachments I've accumulated over the years that require a round bar
by: Blaine 09/19/2021
GMC Terrain
I chose the Yakima A1 raingutter towers for mounting a 96" Yakima crossbar for my Humvee wildfire rig rooftop gear rack. The towers are sturdy and able to handle the constant jarring expected in wild land fire fighting in rugged terrain.
by: Tom03/19/2023
These Yakima towers just work. They go on easily and stay tight. No issues whatsoever. They are a little pricey, but it's nice to have something that just works well without any drama.
by: Carl12/03/2019
Yakima rack arrived a day earlier than expected. All the parts were there instructions were clear took about half hour to install. The rack is a little noisy at highway speed. Darn, guess I'll have to take the back roads! Thumbs up to both etrailer and Yakima.
by: Ramon01/11/2019
2018 Jeep Renegade
The bars were prefect and allowed me to use my old Yakima low rider towers. I just had to cut the bars from 58 inches to 53 inches so I wouldn't have to much over hang. I used a hack saw, tape and a car hose camp. Old trick I learned, you use the hose camp as a guide for straight clean cut.
by: Shane 04/17/2020
2012 Toyota Tundra
This is the second thing that I've ordered from etrailer.
Was looking for 58" Yakima round bars.
Excellent website,prices and shipping.
Product was exactly like it was described.
Perfect transaction, service all around, Next time I'm looking for something I'm searching etrailer first!
by: Steven02/24/2021
Awesome Company!
In the time of COVID doing business with this company was a great experience. I was kept informed by email by their CSR team as to when they would ship product and when it would arrive. Worked like a champ. Product fit my 1974 VW Baja as promised and now I can finally add the much needed Roof Rack System.
Thanks etrailer for being there and taking such care of your customers.
Steve
by: Paul11/23/2021
Added a bike and ski racks and all performed well
by: Patricia Douglas02/14/2022
Went Over and beyond on helping me solve a difficult problem on
how to fine and put a roof rack on a very difficult car...
Best Customer Service of any company I have ever worked with.
Great service before and after the sale to make sure everything
went smoothly. Can’t thank them enough. Very happy customer.
by: Deborah07/27/2023
Great service - great price
by: John07/06/2020
I received the Rain gutter riser, 66' round bars, boat loader and SKS lock cores all well packaged and in good shape. These are for a 2020 Jeep Wrangler JLU Rubicon. The products were easy to install and will work great for loading and transporting my Hobie Outfitter Kayak. The Outfitter is a heavy kayak at 75 lbs unloaded. The Yakama Boat loader makes it easy for one person to load and unload the kayak. The rain gutter mounts and round bars securely hold the kayak for transportation. When not transporting the kayak the whole system quickly removes.
A big plus with ordering through etrailer is the excellent custom service, they will be my go to for future orders.
by: Harold05/15/2022
These shipped very quickly and fit great. While I couldn’t get the bars I wanted until August, I was able to get them elsewhere. Thanks for your help. Would have been 5 starts had I been able to get everything from etrailer
by: David K.07/23/2017
The roof mounts were fairly easy to install with the help of the well written installation instructions. I am looking forward to using my new Yakima roof rack for hauling my ladders or a rooftop clamshell cargo bin that I have.
by: Joe C12/30/2012
The only reason I am not giving it an excellent rating is the considerable wind noise that occurs. While we had our luggage carrier atop our car it seemingly imperceptible, however after driving around for a week while on vacation with simply the bars breaking the wind it was quite loud. With that being said they were a breeze to install, aside from having to use allen tool tighten down the fittings. I later discovered that a wratcheting screwdriver with the correct bit size provided for much faster installation and removal. I would definitely recommend for purchase.
25
377
Show More Reviews Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
- Can Yakima Roof Rack Crossbars be Trimmed Shorter on a 2015 Ford Fusion
- The 48 inch long Yakima crossbars would be just slightly too short to fit properly on a 2015 Ford Fusion. But what you can do is use the 58 inch bars, # Y00409, and shorten them using a saw with a blade that can cut steel.
What I would do is go ahead and install the roof rack and then mark the bars where I would cut them. You will need some of the bar sticking out each end to fit the end caps on.
The cuts will need to be straight otherwise the end caps will not fit and water could
view full answer... - Parts Needed to Install Yakima Round Bar Roof Rack on 2016 Ford Fusion Naked Roof
- I checked with Yakima and for your 2016 Ford Fusion the correct front Q clips are the Q149 and then for the rear the Q124. Bad news is we don't have either anymore as they were discontinued.
So to use your round bars # Y00409 you'd have to use the new components part # Y28TR, # Y03536, # Y06110, and # Y06102.
view full answer... - Roof Rack and Board Carrier for 2019 Hyundai Tucson
- To carry your boards on the roof of your 2019 Hyundai Tucson the first thing you'd need is a roof rack like the Inno aero bar rack part # INXB130-138, # INXS250, and # INK680 which is a confirmed fit and a higher quality rack at a lower price point. Then for a carrier for the boards the Thule SUP Shuttle part # TH811XT would be a really great option that is easy to use and works well.
view full answer... - Can Karrite Voyager Cargo Box Fit on Yakima Round Bar Roof Rack
- Yes, the Karrite Voyager cargo boxes can fit on Yakima Round Bar roof racks like the round bar roof rack that fits your 2006 Honda Ridgeline part numbers # Y00409, # Y03536, and # Y00147. The Voyager is compatible with round, square, aero, elliptical, and most factory crossbars.
view full answer... - What Roof Rack do You Recommend for a 2017 Lexus LS 460?
- I have an answer about your Rhino-Rack crossbar system. Unfortunately, I confirmed that Rhino-Rack does not make a crossbar system that is compatible to fit your 2017 Lexus LS 460. Since they do not have any roof racks for your vehicle, they do not manufacture compatible fit kits for the crossbars. Fit kits from other manufacturers do not work with Rhino-Rack crossbars because each company produces specific fitments for their feet/towers. Here at etrailer, we have never seen anyone custom
view full answer... - Round Bar Roof Rack For A 2022 Toyota Highlander
- We have exactly what you need for your 2022 Toyota Highlander. The Round CrossBars for Yakima Roof System # Y00409 are perfect for your Highlander. These bars are 58" in length, and the capacity varies depending on the application. These bars do not come with endcaps, the endcaps # Y8007026 are sold separately.
To complete these bars, you'll need towers # Y28TR, round bar adapter # Y03536, and a fit kit # Y06153.
You'll want to check your owner's manual for your vehicle and make sure
view full answer... - Yakima Roof Rack Components that Fit 2010 Toyota Prius
- The Yakima SST towers are really old at this point and there's nothing we can recommend that would allow the reuse of them. If you have a set of round Yakima crossbars though you would be able to reuse them on your 2010 Toyota Prius. The current recommended Yakima roof rack for your vehicle consists of part numbers # Y00409, # Y28TR, # Y03536, and # Y06117.
view full answer... - Crossbar Recommendation for Yakima JayLow Kayak Carrier and 2015 Jeep Grand Cherokee
- The best roof rack we carry for using long crossbars is the Yakima RoundBar system. Since the bars slide through the mounting points on the feet you can essentially use whatever length of bar you'd like. I do caution you to not get bars that extend out further than the side view mirrors though.
The Yakima system that fits your 2015 Jeep Grand Cherokee with the black and chrome roof rails is the SkyLine system. You need the SkyLine towers # Y53TR, RoundBar adapter # Y03536, and Landing
view full answer... - 2015 Ford F-250 Super Duty Single Cross Bar Roof Rack
- We do have an option for a single bar roof rack for your 2015 Ford F-150. Best option is the Rhino Rack that consists of part numbers # RRVA150B, # RRRLKVAH, and # DK190H.
Any other brand of rack is going to require you to buy more parts than you'd need. This is an aero shaped bar too which will minimize wind noise/resistance.
view full answer... - Roof Rack for 2014 GMC 1500 Crew Cab
- Yakima offers a roof rack option for your Sierra.
You can construct a rack using the following parts:
58 Inch Round Crossbars, part # Y00409
BaseLine Towers, part # Y28TR
RoundBar Adapters, part # Y03536
BaseClip Fit KIt, part # Y06122 (you need two kits)
You can see current pricing by clicking the links to the product page for each of the items mentioined above.
view full answer... - Parts Needed for Yakima 58 Inch RoundBar Roof Rack on 2016 Toyota 4Runner
- All you'll need to do is order the # Y03536 RoundBar SL adapter kit which comes in a quantity of 4 and the
# Y33TR TimberLine towers, also sold in a quantity of 4.
Since you already have the 58 inch RoundBars, that's all you'll need.
I've linked to the parts, just click each product link, add the parts to a cart and you'll be good to go!
view full answer... - Roof Rack for 2013 Hyundai Santa Fe With Panoramic Sun Roof to Carry Kayak
- For the 2013 Hyundai Santa Fe Sport with a bare roof (and the panoramic sunroof) I suggest the Rhino-Rack 2500 Series rack made of parts # RRVA137B-2, # RRRLKVA and # DK360. This rack features elliptical-shape bars that cut through the air better than round or square bar racks and so it will be quieter than those racks at highway speeds.
The linked page displays the kayak carrier we offer that fit elliptical bars. A great option is the Rhino-Rack J-style carrier # S510. You may care
view full answer... - Recommended Roof Rack for 2013 Wrangler 2 Door with Hard Top
- The easiest solution would be to assemble a roof rack using the following parts from Yakima:
58 Inch Long Round Crossbars, part # Y00409
Yakima 1A Raingutter Towers, part # Y00101
Once the crossbars are in place, the Thule Flat Top Ski and Snowboard Carrier you already have will attach directly to the crossbars. When used on a Wrangler Hard Top, the drip rails that the roof rack towers attach to have a limited carrying capacity. Yakima recommends carrying skis or snowboards only,
view full answer... - Availability of Roof Rack for 2014 Chevy Silverado LT 1500
- The roof rack I recommend for your 2014 Chevy Silverado 1500 Crew Cab is the Yakima system consisting of parts # Y00409, # Y28TR, # Y03536, and # Y06122. This kit includes 58 inch round crossbars, BaseLine Towers and BaseClips. Also, the round crossbars included in this rack offer the widest possible compatibility with accessory items.
This Yakima system is intended specifically for the Silverado and provides the longest crossbars (66 inches), widest crossbar spread (34 inches) and highest
view full answer... - Will Yakima Roof Rack With Raingutter Towers Fit 2010 Jeep Wrangler Unlimited With a Hard Top
- The Yakima roof rack system that you referenced will fit your 2010 Jeep Wrangler Unlimited with a hardtop by attaching to your drip rails/raingutters.
To order a complete system you will need 1 set (qty 2) 58 inch round crossbar # Y00409 and 1 set (qty 4) raingutter towers # Y00101.
Please be advised that since drip rails/raingutters are not structural the maximum allowable load is skis or snowboards only. You should install the towers on the rear roof panels only and do not install
view full answer... - How to Use Yakima Round Crossbars on 2017 Honda Ridgeline With Naked Roof
- The Q Towers have been retired by Yakima, so while we have a way for you to use your current Round 58" CrossBars for Yakima Roof Rack System # Y00409 on your 2017 Honda Ridgeline with a naked roof, you will need new towers, fit kit, and round bar adapter. The correct parts are the follwing:
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06152
- RoundBar SL Adapter # Y03536
view full answer... - Recommended Roof Rack that is Compatible with my 2013 Lexus GX 460
- The only roof rack that we currently offer for your 2013 Lexus GX 460 is the Yakima roof rack # Y00409. The Yakima RailGrab towers are # Y80145. This will only work with flush mounted rails that run front to back.
I included FAQ link and installation videos for you as well.
view full answer... - Yakima Round Bar Roof Rack for 2023 Chevy Tahoe
- I checked with Yakima and their 58 inch round bar roof rack part numbers # Y00409, # Y00145, # Y03536, # Y44UV is a fit for your 2023 Chevy Tahoe with he factory rack so this would give you what you are looking for.
view full answer... - Parts Needed to Install Yakima Roof Rack on 2015 Chevy Impala
- Yakima no longer uses the Q Tower rack components as they have moved to a new style of round bar roof rack.
Instead you need the following components to complete a Yakima round bar rack:
Round 58" CrossBars # Y00409
BaseLine Towers # Y28TR
RoundBar SL Adapter # Y03536
BaseClip Fit Kit # Y06123
view full answer... - Roof Rack Recommendation for 2016 Chevy Silverado 2500 with Sunroof
- The roof of a vehicle is part of the overall structure and strength of it. Vehicles with sun roofs have to have the roofs stabilized differently and it's a much more delicate process since a large portion of the roof is missing.
Because of that we don't recommend track style roof racks with sun roof vehicles.
Instead there is the Yakima rack part numbers # Y00409, # Y28TR, # Y03536, and # Y06122 which fits with your sunroof on your 2016 Chevy Silverado 2500.
view full answer... - Artificial Rain Gutter Recommendation for a Trailer to Allow a Yakima Rain Gutter Roof Rack to Fit
- Since you have Yakima Rain Gutters towers like part # Y00101 all you would need is their set of artificial rain gutters part # Y08001 to install the roof rack you have on your trailer.
We do not offer a way to attach your Yakima components directly to a square bar setup that you may have.
view full answer... - Will the Yakima 1A Raingutter Towers Work with the Kwik-Rail Mounting Brackets # Y08002?
- From the looks of your photo, you have the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers # Y08002. I confirmed with my tech at Yakima that the Yakima 1A Raingutter Towers (QTY 4) # Y00101 fit these Kwik-Rail mounts. For theft-deterrence, I recommend the Yakima Same-Key Lock Cores # Y07204.
If you need Yakima RoundBars to go with the towers and the brackets, I recommend one of the following crossbar sets:
- Round 48" CrossBars for Yakima Roof Rack System # Y00408
-
view full answer... - What Prevents the Knobs on the Yakima 1A Raingutter Towers From Coming Loose
- Essentially, the tension that the towers # Y00101 are under are what prevents them from loosening. To prevent the knob from turning you can install lock cores, # Y07204. When locked the knob the system cannot be loosened.
view full answer... - Are Yakima Q-Clips Available to Put a Roof Rack on a 1997 Toyota Previa
- I have a solution for you, but you won't be able to use the Yakima Q Towers because there are no Q-clips available to fit your 1997 Toyota Previa. Instead, you'll need to use the Yakima 1A Raingutter Towers # Y00101 to attach a roof rack to your vehicle. The Yakima 1A towers mount in the rain gutters on your Previa and will provide you with the mounting points needed to create a roof rack system.
For crossbars you can use either the Yakima 58" Round Bars # Y00409 or 48" Round Bars #
view full answer... - Recommended Spacing Between Yakima Rain Gutter Towers on 1998 Jeep Cherokee
- When mounting rain gutter towers, # Y00101, there is no specific distance apart they must be placed. What you will want to look at is where you can mount them (the strongest points on the roof would be ideal) and how far apart you need them to mount various items like bike racks, canoes, kayaks, cargo boxes, baskets or any other accessory. Just remember that if you place the bars too far back then items on the roof may hang over the back end too much. Same for the front.
In addition
view full answer... - Roof Rack for a 2000 Jeep Wrangler with Aftermarket Hard Top
- In order to install a roof rack on the aftermarket hard top on your 2000 Jeep Wrangler you will have to do some drilling. You would need to use the Yakima side loader brackets # Y08002, to create artificial raingutters.
Then you will need Raingutter Towers, # Y00101, and CrossBars # Y00409.
At this time there are no non-drilling options for the 2000 Jeep Wrangler with an aftermarket hard top that does not have raingutters.
view full answer... - Mounting Brackets for Yakima Raingutter Towers for Roof Rack on Trailer
- I believe I understand the part you are asking about to install a Yakima roof rack on your trailer, which is the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers # Y08002.
Then to complete your set up you will need the Yakima 1A Raingutter Towers # Y00101 as well as the appropriate length crossbars for your trailer, depending on its width. The options are the following:
- 48 Inches: Round 48" CrossBars for Yakima Roof Rack System # Y00408
- 58 Inches: Round 58" CrossBars
view full answer... - Alternating Sides When Installing Yakima Raingutter Towers On 1987 Volkswagen Vanagon
- One problem that many folks have when installing a roof rack is that they will work on one side of the vehicle to tighten it down and then move to the other side only to find that they cannot get it to tighten up as they need.
When installing the roof rack it is recommended to tighten each side evenly which means you will need to tighten one side a little and then move to the other side and tighten that side the same amount, alternating until the roof rack is secure, much like tightening
view full answer... - Availability of Yakima Roof Rack Tower that Can Fit Rain Gutter on Roof
- Yakima makes raingutter towers, part # Y00101 but there isn't a way to convert the Q tower to fit them due to the angle that the gutters are at.
For a round crossbar then we have the part # Y00409.
view full answer... - Roof Rack for a 2022 Jeep Wrangler Unlimited with OneTouch Skytop
- I do have an option for you. I checked with our manufacturers and was able to find one roof rack that will work for your 2022 Jeep Wrangler Unlimited with OneTouch Skytop. This rack will fit and still allow you to open the top as long as you use the recommended spacers. All of the parts needed for this rack are listed below.
- Yakima 1A Raingutter Towers # Y00101
- Round CrossBars for Yakima Roof Rack - 58" # Y00409
- HiRise Spacers for Yakima 1A Raingutter Towers # Y01101
You can
view full answer... - Recommendation on a Roof Rack and a Kayak Carrier to Fit a 2016 Ford F-150 Super Cab
- I have a solution for a roof rack and kayak carrier for your 2016 Ford F-150 Super Cab.
I recommend the Yakima JetStream Roof Rack System, # Y00426 JetStream Crossbars, # Y28TR BaseLine Towers, and # Y06122 BaseClip Fit Kit. The JetStream bars are an aerodynamic aero design that will cut down on wind drag and noise when in transit. The crossbars are constructed of lightweight and sturdy aluminum and full length design allows for maximum space for carrying roof mounted accessories.
For
view full answer... - Yakima Roof Rack Recommendation for a 2011 Jeep Wrangler
- The difference between the two mounting brackets is that the # Y08001 moves the attachment point for the Raingutter tower part # Y00101 out further to clear a roof that is tall or has steep or square sides.
The # Y08002 is the regular one used for roofs that are shorter and have less steep sides.
It really depends on the profile of your roof and how high/low you want to install the gutter tower.
If you are installing the rack high on the roof you would want the # Y08002. If you
view full answer... - Carrying Kayaks And Operating The Sunroof On A 2021 Jeep Wrangler Unlimited
- The Yakima 1A Raingutter Towers (QTY 4), part Y00101, is not tall enough to work with the one touch sunroof on your 2021 Jeep Wrangler Unlimited. In order to operate the sunroof you need the tallest, 11", rain gutter towers. If you add the HiRise Spacers for Yakima 1A Raingutter Towers, part # Y01101, your towers will have the necessary height. You can add the Round 58" CrossBars for Yakima Roof Rack System (QTY 2), part #Y00409. This rack will have round bars, so any of our kayak carriers
view full answer... - Which Roof Racks Will Fit a 2004 Ford E-150 Van
- We do have roof rack options for a 2004 Ford Van. I have included a link to the available options for you to view. The most popular and most economic option is the Yakima system. For it you will need the following parts:
Crossbars, # Y00410
Yakima Raingutter Towers, # Y00101
I have included a link to the installation details for the Raingutter Towers for you.
If this is a work van and you need a ladder rack option, we have those as well. I have included another link to them for you.
view full answer... - Will Yakima Round 48 Inch Crossbars # Y00408 Fit My 1997 Toyota Corolla
- Yes, the Yakima Round 48 Inch Crossbars, part # Y00408, will fit your 1997 Toyota Corolla. To mount the # Y00408 Crossbars, you will need to use Yakima 1A Raingutter Towers, part # Y00101.
You will want to check the roof load carrying capacity of your Corolla as stated in the vehicle owners manual as you will not want to exceed it.
I have linked an FAQ roof racks that you may find as a good reference. Also linked are all the roof racks we have available for the 1997 Toyota Corolla.
view full answer... - Yakima Roof Rack and Kayak Carrier Recommendation for a 2015 Jeep Wrangler Unlimited Hardtop
- Yes you can. I checked with Yakima and the Yakima Raingutter 1A Towers part # Y00101 are confirmed to fit the factory hardtop of your 2015 Jeep Wrangler Unlimited.
The recommended crossbars would be the part # Y00409.
Yakima says this rack setup has a weight capacity of 100 lbs. You will need to consult your owners manual to determine what Jeep says is your roof capacity and be sure to go with the lower of the two as the overall capacity.
For a carrier that can carry up to 2 kayaks
view full answer... - Yakima Roof Rack Parts Needed for a 1999 Ford Econoline Van
- The components needed to install a Yakima roof rack on your 1999 Ford Van that has rain gutters are the part # Y00410 for the crossbars and then the part # Y00101 for the raingutter towers.
Feel free to send me pictures of your van if you like and I will check them out if you like.
view full answer... - Non-Roof Rack Towers for a 2016 Jeep Wrangler
- For your possible application, I recommend a set of Yakima A1 Raingutters, part # Y00101. These are a confirmed fit for your 2016 Jeep Wrangler, and have individual loops on the top that can be tightened to fit your application.
Unfortunately, these only come in a four pack, but depending on what you plan on using them for, this can be useful as additional contact points.
I recommend a kit of SKS locks, part # Y07204, as these use a simple screw-on assembly and the locks will secure
view full answer... - Roof Rack System for 2008 Jeep Wrangler Unlimited with Factory Hardtop
- According to Yakima, the drip rails on that factory hard top are not structural. When used in this installation, the crossbars are intended for use with skis or snowboards only. The maximum allowable load would be 6 skis or 4 snowboards. When used within this limited scope, the drip rail mounts will not damage the rain gutter or drip rail. If used for any other purpose, they would most likely be damaged.
If you decide to install the Y00101 Raingutter Towers and 58 inch load bars, keep
view full answer... - Recommended Roof Rack for 2006 Dodge Sprinter
- Yes, we do offer roof rack options for a 2006 Dodge Sprinter which mount to the rain gutter channels. I recommend the Yakima Rain Gutter Round Bar System which consists of part # Y00101 and part # Y00410. These crossbars will allow you to use all sorts of rooftop mounted accessories. They are made of galvanized steel so they are both strong and long lasting.
I have linked our watersport carrier selection below for you as well.
view full answer...
Yakima Accessories
Fit to this rack on your 2015 Jeep Wrangler Unlimited
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Test Fit:
Zack K
Test Fit:
Carla M
Test Fit:
Robert C
Test Fit:
Adam E
Video by:
Andrew K
Video by:
Zach D
Written by:
Tyler C
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Alex H
Updated by:
Michael B
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeep Wrangler Unlimited Accessories
Keith W.
5/16/2021
Still in love with it