1. Roof Rack
  2. Yakima
  3. Feet
  4. 4 Pack
  5. Locks Not Included
Yakima 1A Raingutter Towers (QTY 4)

Yakima 1A Raingutter Towers (QTY 4)

Item # Y00101
lowest price pledge
Retail:$229.75
Our Price: $219.00
You Save: $10.75
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 5 lbs
Quantity: 
In Stock
Yakima 4 Pack Roof Rack - Y00101
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

For vehicles with rain gutters, start building your Yakima roof rack system with these 1A Raingutter Towers. Towers provide the base for your system, attaching to traditional rain gutters and holding crossbars (sold separately) in place. Lowest Prices for the best roof rack from Yakima. Yakima 1A Raingutter Towers (QTY 4) part number Y00101 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (23)
  • Q & A (68)
  • Videos (6)
  • Photos
  • Why etrailer?

Yakima Roof Rack - Y00101

  • Yakima
  • Feet
  • 4 Pack
  • Locks Not Included

For vehicles with rain gutters, start building your Yakima roof rack system with these 1A Raingutter Towers. Towers provide the base for your system, attaching to traditional rain gutters and holding crossbars (sold separately) in place.


Features:

  • Clamp onto vehicle rain gutters
  • Provide base for Yakima roof-rack crossbars
  • Adjust to non-parallel rain gutters
  • Are lockable with Same Key System (SKS) Cores (sold separately)
    • Cores lock crossbars to towers and towers to vehicle roof
    • SKS Cores can be changed out to make all your Yakima locks keyed alike
  • Constructed from tough Zytel nylon


Specs:

  • Quantity: 4
  • Additional components required for a complete roof-rack system:
    • Crossbars (sold separately) to provide attachment point for accessories
  • SKS Cores required: 4
  • Height: 7-1/4"
    • Can be increased by 3-1/2" by 1A HiRise Spacers (Y01101), sold separately
  • Lifetime warranty


8000101 Yakima 1A Raingutter Towers (QTY 4)

Installation Details Y00101 Installation instructions



Video of Yakima 1A Raingutter Towers (QTY 4)

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Yakima 1A Raingutter Tower Side Loader Mounting Brackets Review

Speaker 1: Today we're going to be taking a look at and installing Yakima Side Loader Mounting Brackets for the Yakima 1A Raingutter Towers, part number Y08002. These brackets are going to allow camper shells that don't have gutter rails to work with roof-mounted racks that are for gutter rails.These are designed to work with the Yakima 1A Raingutter Towers, part number Y00101. You can use different size round bars. The ones we're currently using are 58 inches, and they're part number Y00409. These can be mounted any distance apart that you desire, and they'll work with bike racks, kayak carriers, cargo carriers. The bracket measures 5-3/4 inches long, 15/16 inches wide, and 13/16 inches tall.

Your towers will sit right into the gutter rail. Your clamp will fit underneath, and you just tighten it down.Our customer Tom purchased these, and this is what he had to say. "Side loaders are the only product I have found to secure racks to camper shells. Very secure, no water leaks into shell. Quality product."If you're comparing these to other camper shell mounting options, there are top loaders with railing.

Those are nice because you can adjust the spacing, whereas these are permanently mounted in the spacing that you've chosen. However, the top-mounted railing does have the issue of potentially caving through the top, whereas these are more rugged, attached to the side. Also, placing the mounting point further apart helps increase its rigidness.Included with your kit, you're going to get two raingutter brackets. You're going to get a rubber seal that goes between the bracket and your camper shell. You're going to get a large, rectangular washer that's going to help clamp it to the inside of your camper shell and prevent it from pulling through.

This is great when comparing it to other kits that don't have this. They just use washers. This is a much larger surface area than those, so it's going to be much more rigid, especially on a fiberglass camper shell.To install our hardware, you're going to need a half-inch socket, a 5/16 drill bit, and a tape measure to help you line everything up, make sure it's even. Each camper shell is going to be slightly different, so you're going to have to line yours up to find that appropriate spot. The way I like to do that, we'll put the brackets on our gutter towers.

Then we'll tighten it down. We're going to do this on the other side as well.We'll set our bars on top our camper shell in about the position we want them to be mounted. We want to make sure that both sides match up, so you want to find some reference points. We're going to use the top of our window glass molding here and the front of our camper shell to help line this up. We're going to measure from there to there and make sure that it's even on both sides and also that it's the same distance from the front of the camper shell on both sides.Once you've got it lined up and even on both sides, we're going to make a mark around our bracket using a little paint stick. We're going to do that on both sides. Can then take your bracket . We're going to line it up with the marks that we made. We're going to mark our drill point. You want to do that on both sides.We'll now use our 15/16 drill bit to drill out our markings. I'll clean off the area. You can go ahead and clean the paint stick markings that you made off as well. Put a little bit of silicone around the hole. That'll help seal it up to prevent any moisture from leaking into your camper shell. We'll take our bracket. Put the rubber strip on the back of it. Slide our hardware through the bracket, these little carriage bolts. We'll push those through our holes. We'll do that on the other side as well.We're now inside of our camper shell towards the front. Here's our two bolts with the silicone on that we pushed through. We'll now put our nut plate on. That'll slide over both of our bolts. Now, if they're not pushed through far enough to get both the lock washer and the nut on them, you can thread the nut on first on each one. Use your half-inch socket to pull the bolts the rest of the way through. Then we can take our nut off, one at a time. Place on our lock washer and reinstall the nut. Then we'll do the same on the other side. Now we'll tighten them both down. Then we'll repeat that same process on the other side.You can now put your crossbars into place. Make sure that your overhang is even on both sides, and tighten down your gutter foot towers. The kit comes with one set of brackets, one for each side, so if you want to mount two bars on your camper shell to be able to mount things, you'll need to purchase two kits. You'll install that same kit on the rear in the exact same way. When you're installing these, you do want to keep in mind that you want to keep the bars at equal height, or keep your rear crossbar slightly higher than your front crossbar.Now that you've got both your bars installed and adjusted, you're ready to load them up and hit the road. That completes our look at Yakima Side Loader Mounting Brackets for the Yakima 1A Raingutter Towers, part number Y08002.


Customer Reviews

Yakima 1A Raingutter Towers (QTY 4) - Y00101

Average Customer Rating:  4.8 out of 5 stars   (22 Customer Reviews)

For vehicles with rain gutters, start building your Yakima roof rack system with these 1A Raingutter Towers. Towers provide the base for your system, attaching to traditional rain gutters and holding crossbars (sold separately) in place.

- Y00101
by:

Love our roof rack, thankful you were able to get the last item we needed to finish our project. 894634



- Y00101
by:

I received the Rain gutter riser, 66' round bars, boat loader and SKS lock cores all well packaged and in good shape. These are for a 2020 Jeep Wrangler JLU Rubicon. The products were easy to install and will work great for loading and transporting my Hobie Outfitter Kayak. The Outfitter is a heavy kayak at 75 lbs unloaded. The Yakama Boat loader makes it easy for one person to load and unload the kayak. The rain gutter mounts and round bars securely hold the kayak for transportation. When not transporting the kayak the whole system quickly removes. A big plus with ordering through etrailer is the excellent custom service, they will be my go to for future orders. 828863



- Y00101
by:
2017 Chevrolet Express Van

etrailer never disappoints! Every product I need, I check that etrailer has it before purchasing anywhere else. Thank you for the excellent service, the fast delivery, and the email updates on order status. 798431



- Y00101
by:

Fits awesome on my 2016 jeep unlimited. Some wind noise but not a problem. 794637



- Y00101
by:

Got just what I ordered, quickly. Yakima rack system. For 2008 van, now I need to order one more set. 782286



- Y00101
by:

This gutter clamp Rack system is the best I’ve ever seen it works Great, easy to install. 747017



- Y00101
by:

Yakima rack arrived a day earlier than expected. All the parts were there instructions were clear took about half hour to install. The rack is a little noisy at highway speed. Darn, guess I'll have to take the back roads! Thumbs up to both etrailer and Yakima. 729079



- Y00101
by:
2015 Ram 1500

As usual, excellent Yakima quality. But PRICEY. 628444



- Y00101
by:
2014 Ford Van

The customer service is exceptional. Nick went above and beyond getting the package out as well as dedicated follow-up. I will be ordering another roof rack for another vehicle. Even the return process was seamless thanks to Shelia. I ordered a tow hitch wiring harness a few months ago and received the same great service. Will continue to do business with etrailer. 599097



- Y00101
by:

Have owned this set of rack towers on the past 3 pickup trucks I've owned..!! Work very well...!!! I am a contractor and occasionally load them up pretty heavily....! 583486



- Y00101
by:
1991 GMC Van

Installed as described on my van. 538703



- Y00101
by:

I'm loving the Yakima rack! 270666



- Y00101
by:
1993 Volvo 240

Great product. Installed on my 93 Volvo 240 Wagon with ease. Delivery was super fast too. 207751


Comments
Still rocks by doing just as it should
Eric P - 06/26/2016

18964

- Y00101
by:

Did an excellent job guys. The Yakima towers arrived on time and in good shape. Mounted right up to the canopy clips, installed the existing bars, kayak racks, and lock cores without any issues. All is ship-shape now. Will definitely come back to you guys again. Thanks! 110825



- Y00101
by:

Loved shopping with etrailer, thanks for all the help. 65828



- Y00101
by:
1994 BMW 5 Series

roof racks showed up in great condition, and showed up as one package.... I should have ordered the J racks from here but I found them cheaper locally so Thule J racks compliment the whole setup and i am just about ready to hit the water :) 44422



- Y8810137
by:

Review from a similar 1A in Roof Rack


I needed this Yakima replacement tower for a trip. Etrailer had one in stock and got it to me super fast. I was able to fix the roof rack and hullavator! Thanks so much. 884596



- Y8810137
by:

Review from a similar 1A in Roof Rack


Looks good now I just need a way to secure it with out the knob, and bolt. 573347


Comments
with my son in Washington state no complaints
Richard - 10/11/2019

62794

- Y8810137
by:

Review from a similar 1A in Roof Rack


Great parts , and they were all the right parts , delivered to your door ! 510230



- Y8810137
by:

Review from a similar 1A in Roof Rack


I purchased a single Yakima 66" round cross bar and a pair of gutter mount towers. The Yakima mega warrior cargo basket and cross bar set up I have was super easy to install, very user friendly. The extra cargo space is great, Customer service at etrailer is great. Shipment of my order was slightly delayed. I was made aware of the shipping status by email consistently until I received the products. Answers to my questions we're prompt and courteous. 431007


Comments
Works great, keeps bulky stuff out of the living quarters while we’re on the road.
Kj - 09/10/2018

43380

- Y8810137
by:

Review from a similar 1A in Roof Rack


Shipped quick. Direct swap out for my broken 1A Tower. Note: You must reuse the stud from original tower. This tower does not come complete and ready to bolt up. Not a big deal as long as you still have your old tower in hand. 395037



- Y8810137
by:

Review from a similar 1A in Roof Rack


I bought this part to replace a broken Yakima Rack Tower on the family tent trailer. One of the towers has been broken for a couple years and finally gave out completely. After looking around, found this on etrailer.com, the price was right, so i ordered it. Part was delivered exactly when promised and it was exactly what I ordered (and needed!) Looked brand new to me and fit just as it should. I almost want to order 3 more now, as this one makes the other 3 look bad :-). I will certainly look to etrailer.com for any future camper needs! 357341


22
22

Ask the Experts about this Yakima Roof Rack

  • Mounting Brackets for Yakima Raingutter Towers for Roof Rack on Trailer
    I believe I understand the part you are asking about to install a Yakima roof rack on your trailer, which is the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers # Y08002. Then to complete your set up you will need the Yakima 1A Raingutter Towers # Y00101 as well as the appropriate length crossbars for your trailer, depending on its width. The options are the following: - 48 Inches: Round 48" CrossBars for Yakima Roof Rack System # Y00408 - 58 Inches: Round 58" CrossBars...
    view full answer...
  • Kayak Rack and Roof Rack Recommendation for a 2016 Jeep Wrangler Unlimited
    Yakima also offers a roof rack solution. Crossbars can be installed using the Yakima 58 inch crossbars, part # Y00409 and Rain Gutter Towers, part # Y00101. However, this rack can only be used when the soft top is removed. With the soft top on there are no solutions we can provide. I would recommend the Yakima BigStack 2 Kayak Carrier, part # Y04041 for use with this rack.
    view full answer...
  • Parts Needed to Install 3-Crossbar Yakima Roof Rack on 1989 Toyota Land Cruiser
    Yes, you can use 2 of Yakima Replacement 1A Raingutter Tower # Y8810137 to add a third round crossbar # Y8810025 to the roof of your 1989 Toyota Land Cruiser. You will want to order the following items and quantities to get your 3-bar rack system. # Y00410 = 1 # Y00101 = 1 # Y8810137 = 2 # Y8810025 = 1 # Y8810136 = 1 These items will give you a total of three bars and six towers.
    view full answer...
  • Artificial Rain Gutter Recommendation for a Trailer to Allow a Yakima Rain Gutter Roof Rack to Fit
    Since you have Yakima Rain Gutters towers like part # Y00101 all you would need is their set of artificial rain gutters part # Y08001 to install the roof rack you have on your trailer. We do not offer a way to attach your Yakima components directly to a square bar setup that you may have.
    view full answer...
  • Roof Rack System for 2008 Jeep Wrangler Unlimited with Factory Hardtop
    According to Yakima, the drip rails on that factory hard top are not structural. When used in this installation, the crossbars are intended for use with skis or snowboards only. The maximum allowable load would be 6 skis or 4 snowboards. When used within this limited scope, the drip rail mounts will not damage the rain gutter or drip rail. If used for any other purpose, they would most likely be damaged. If you decide to install the Y00101 Raingutter Towers and 58 inch load bars, keep...
    view full answer...
  • Recommended Spacing Between Yakima Rain Gutter Towers on 1998 Jeep Cherokee
    When mounting rain gutter towers, # Y00101, there is no specific distance apart they must be placed. What you will want to look at is where you can mount them (the strongest points on the roof would be ideal) and how far apart you need them to mount various items like bike racks, canoes, kayaks, cargo boxes, baskets or any other accessory. Just remember that if you place the bars too far back then items on the roof may hang over the back end too much. Same for the front. In addition...
    view full answer...
  • What Prevents the Knobs on the Yakima 1A Raingutter Towers From Coming Loose
    Essentially, the tension that the towers # Y00101 are under are what prevents them from loosening. To prevent the knob from turning you can install lock cores, # Y07204. When locked the knob the system cannot be loosened.
    view full answer...
  • Yakima Roof Rack Recommendation for a 2011 Jeep Wrangler
    The difference between the two mounting brackets is that the # Y08001 moves the attachment point for the Raingutter tower part # Y00101 out further to clear a roof that is tall or has steep or square sides. The # Y08002 is the regular one used for roofs that are shorter and have less steep sides. It really depends on the profile of your roof and how high/low you want to install the gutter tower. If you are installing the rack high on the roof you would want the # Y08002. If you...
    view full answer...
  • Recommendation on a Roof Rack and a Kayak Carrier to Fit a 2016 Ford F-150 Super Cab
    I have a solution for a roof rack and kayak carrier for your 2016 Ford F-150 Super Cab. I recommend the Yakima JetStream Roof Rack System, # Y00429 JetStream Crossbars, # Y00146 BaseLine Towers, and # Y06122 BaseClip Fit Kit. The JetStream bars are an aerodynamic aero design that will cut down on wind drag and noise when in transit. The crossbars are constructed of lightweight and sturdy aluminum and full length design allows for maximum space for carrying roof mounted accessories. For...
    view full answer...
  • Alternating Sides When Installing Yakima Raingutter Towers On 1987 Volkswagen Vanagon
    One problem that many folks have when installing a roof rack is that they will work on one side of the vehicle to tighten it down and then move to the other side only to find that they cannot get it to tighten up as they need. When installing the roof rack it is recommended to tighten each side evenly which means you will need to tighten one side a little and then move to the other side and tighten that side the same amount, alternating until the roof rack is secure, much like tightening...
    view full answer...
  • Can Yakima Raingutter Roof Rack Work With 2011 Jeep Wrangler Unlimited
    The Yakima roof rack that uses the 1A Raingutter Towers is confirmed as a fit for your 2011 Jeep Wrangler Unlimited. There is no drilling required for installation. The weight capacity of this roof rack is 100 lbs. To order this roof rack you will need part # Y00409, and part # Y00101. The Thule Roof Rack does not require drilling for installation either. This roof rack features steel square crossbars and has a weight capacity of 165 lbs. To order this roof rack you will need part...
    view full answer...
  • Roof Rack for a 2000 Jeep Wrangler with Aftermarket Hard Top
    In order to install a roof rack on the aftermarket hard top on your 2000 Jeep Wrangler you will have to do some drilling. You would need to use the Yakima side loader brackets # Y08002, to create artificial raingutters. Then you will need Raingutter Towers, # Y00101, and CrossBars # Y00409. At this time there are no non-drilling options for the 2000 Jeep Wrangler with an aftermarket hard top that does not have raingutters.
    view full answer...
  • Yakima Roof Rack Parts Needed for a 1999 Ford Econoline Van
    The components needed to install a Yakima roof rack on your 1999 Ford Van that has rain gutters are the part # Y00410 for the crossbars and then the part # Y00101 for the raingutter towers. Feel free to send me pictures of your van if you like and I will check them out if you like.
    view full answer...
  • Yakima Roof Rack and Kayak Carrier Recommendation for a 2015 Jeep Wrangler Unlimited Hardtop
    Yes you can. I checked with Yakima and the Yakima Raingutter 1A Towers part # Y00101 are confirmed to fit the factory hardtop of your 2015 Jeep Wrangler Unlimited. The recommended crossbars would be the part # Y00409. Yakima says this rack setup has a weight capacity of 100 lbs. You will need to consult your owners manual to determine what Jeep says is your roof capacity and be sure to go with the lower of the two as the overall capacity. For a carrier that can carry up to 2 kayaks...
    view full answer...
  • Which Roof Racks Will Fit a 2004 Ford E-150 Van
    We do have roof rack options for a 2004 Ford Van. I have included a link to the available options for you to view. The most popular and most economic option is the Yakima system. For it you will need the following parts: Crossbars, # Y00410 Yakima Raingutter Towers, # Y00101 I have included a link to the installation details for the Raingutter Towers for you. If this is a work van and you need a ladder rack option, we have those as well. I have included another link to them for you.
    view full answer...
  • Non-Roof Rack Towers for a 2016 Jeep Wrangler
    For your possible application, I recommend a set of Yakima A1 Raingutters, part # Y00101. These are a confirmed fit for your 2016 Jeep Wrangler, and have individual loops on the top that can be tightened to fit your application. Unfortunately, these only come in a four pack, but depending on what you plan on using them for, this can be useful as additional contact points. I recommend a kit of SKS locks, part # Y07204, as these use a simple screw-on assembly and the locks will secure...
    view full answer...
  • Rain Gutter Roof Rack Availability for a 1959 Rover P4
    The Yakima Tower Kit we have for Rain Gutters is part # Y00101. This has never been tested on your 1959 Rover P4 but it is designed to fit rain gutters like what you have. You would need two crossbars part # Y8810023 as well. The height of the gutter feet is 7-1/4 inches. I looked at pictures of the roof of your vehicle and it has a pretty rounded roof. If you needed a taller setup you would also need the spacer to increase the height part # Y01101 which will ad 3-1/2 inches.
    view full answer...
  • Why Aren't Rubber Boots Included for the Outside Raingutters with Yakima Raingutter Towers
    I assume you are talking about the hook part of the gutter feet. A rubber boot would cause fit issues with the Yakima Raingutter towers # Y00101. Rubber or plastic can flex and move which could lead to the clamp part of the tower to come off. The hooks are coated so as to avoid metal on metal contact. If you want you could place protective clear film, # 853-5481, in the desired locations. This is a set of 4 film sections so that works out well since there are 4 towers. But you may need...
    view full answer...
  • Will Yakima Round 48 Inch Crossbars # Y00408 Fit My 1997 Toyota Corolla
    Yes, the Yakima Round 48 Inch Crossbars, part # Y00408, will fit your 1997 Toyota Corolla. To mount the # Y00408 Crossbars, you will need to use Yakima 1A Raingutter Towers, part # Y00101. You will want to check the roof load carrying capacity of your Corolla as stated in the vehicle owners manual as you will not want to exceed it. I have linked an FAQ roof racks that you may find as a good reference. Also linked are all the roof racks we have available for the 1997 Toyota Corolla.
    view full answer...
  • How to Carry Kayak at Front of 1992 Ford E-350 Van
    Thanks for the photos, and although we do have a solution for you, the Curt Vertical Receiver Adapter # C45013 will only work with vertical OEM hitch receivers, which your 1992 Ford E-350 does not have. Additionally, any type of adapter is going to cut the capacity of your trailer hitch in half - including the tongue weight so adding any type of adapter with the type of cargo you are carrying is likely to push you past your capacity limits. The best option to carry your kayak is going...
    view full answer...
  • Recommended Trailer Hitch and Roof Rack for 1999 Ford E150 Superwagon
    The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41906 is a fit for your 1999 Ford E-150 Superwagon. It is a fit for 1995-2003 Superwagon models and will install easily with the included hardware. For the roof rack compatible with a Thule Cargo Basket or Cargo Box, I recommend the Inno Square Crossbars - Steel - Black - 65" Long - Qty 2 # INB165 and Inno Feet for Square Crossbars - Rain Gutters - 7-1/2" Tall - Qty 4 # INSD. To add a ladder, I recommend the Surco Universal Exterior...
    view full answer...
  • Will Wide Body Mounting Brackets for Yakima 1A Raingutter Towers Work on Truck Camper Shell
    Yes, the Wide Body Mounting Brackets for Yakima 1A Raingutter Towers # Y08001 will work on a truck camper shell; if you take a look at the cut out of the instructions I added you can see that this is what these brackets were designed for. These brackets allow you to mount the Yakima 1A Raingutter Towers # Y00101 and the appropriate length round crossbars, which will likely be Round 66" CrossBars for Yakima Roof Rack System # Y00410, 78" CrossBars # Y00411, or 86" CrossBars # Y00420. I...
    view full answer...
  • Roof Rack for 2020 GMC Savana 3500 to Use Yakima LockNLoad Platform Rack
    If you install the Yakima Round Bar Roof Rack part numbers # Y00410 and # Y00101 on your 2020 GMC Savana Van 3500 with a naked roof the LockNLoad Platform Rack # Y05049-39 would fit and work great.
    view full answer...
  • Recommended Roof Rack And Kayak Carrier For 1996 Ford Bronco
    The roof rack I recommend for your 1996 Bronco is the Yakima roof rack. This roof rack has 66-inch long round crossbars, and includes raingutter towers. To order this roof rack you will need part # Y00410, and part # Y00101. The kayak carrier I recommend is the Yakima BigStack Roof Mounted 2 Kayak Carrier System, part # Y04041. This system comes with straps to secure the kayak to the carrier and bow and stern tie-downs to secure the kayak to the vehicle. For a second kayak I recommend...
    view full answer...
  • Are Q-Clips Needed for the Yakima Bolt-On TopLoader Mounting Brackets
    The Bolt-On TopLoader Mounting Brackets part # Y08005 will require a certain set of Q-Clips to attach to the Yakima Q Towers Roof Rack Feet part # Y00124. However, these Q-Clips have been discontinued and are no longer attainable therefore your only option is to replace the Q Towers with the Yakima 1A Raingutter Towers part # Y00101 so you can use the Bolt-On TopLoader Mounting Brackets. There is no way to reuse the Q Towers unfortunately.
    view full answer...
  • Recommended Roof Rack for 2013 Wrangler 2 Door with Hard Top
    The easiest solution would be to assemble a roof rack using the following parts from Yakima: 58 Inch Long Round Crossbars, part # Y00409 Yakima 1A Raingutter Towers, part # Y00101 Once the crossbars are in place, the Thule Flat Top Ski and Snowboard Carrier you already have will attach directly to the crossbars. When used on a Wrangler Hard Top, the drip rails that the roof rack towers attach to have a limited carrying capacity. Yakima recommends carrying skis or snowboards only,...
    view full answer...
  • Best Roof Rack Fit for 2020 Jeep Gladiator
    The best roof rack for your 2020 Jeep Gladiator consists of the Yakima 1A Raingutter Towers # Y00101 and Round 58" CrossBars for Yakima Roof Rack System # Y00409. As you can see from the accompanying photo, which is from Yakima, this roof rack system will give your Gladiator a fantastic way to mount accessories like bike racks, kayak carriers or cargo boxes so you can get to your destination in style with all your needed gear. Since this is a round bar system I highly recommend adding...
    view full answer...
  • Roof Rack Recommendation for a 2013 Jeep Wrangler Unlimited
    We have a few different roof rack options for your 2013 Jeep Wrangler Unlimited. Two roof racks that I recommend looking at is the Yakima round bar roof rack or the Thule square bar roof rack systems for hardtops. It appears that your Jeep has a hardtop in the photo you provided. The Yakima roof rack consists of the following: 58 inch round crossbars # Y00409 Yakima 1A Raingutter Towers # Y00101 The Thule roof rack consists of the following: 60 inch SquarBars # TH712500 Rapid...
    view full answer...

Do you have a question about this Roof Rack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality roof rack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Test Fit:
Zack K
Test Fit:
Carla M
Test Fit:
Robert C
Test Fit:
Adam E
Video by:
Andrew K
Video by:
Zach D
Written by:
Tyler C
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.