InfiniteRule: Secure Locking Pins for Towing and EquipmentInfiniteRule provides high-security locking pins designed for towing and securing valuable equipment, offering peace of mind on the road.
Heavy-Duty Materials:
Crafted for strength and durability, resisting tampering.
Easy to Use:
Quick and straightforward to lock and unlock as needed.
Weather-Resistant:
Built to withstand outdoor elements and resist corrosion.
Versatile Fit:
Compatible with various hitch sizes for versatile use.
For secure towing and equipment protection, choose InfiniteRule locking pins.
Hi Steve, I went out to our warehouse for you and measured the shank of the WeightSafe Safe Load Gooseneck Hitch part #WS27MR and the B&W Gooseneck Hitch Ball from the ball and safety chain kit part #BWGNXA2061 confirmed to fit your 2025 Ford…
Hi Steve, The Curt Hitch Receiver Reducer Sleeves - 3inch to 2-1/2inch or 2-inch part #C45408 has a pin hole diameter of 3/4". However, since this is adapting all the way down to a 2 inch, you'll need to use a 5/8" pin because the pin…
Hey Robert, we actually have a lock that was made for locking A-60 couplers like the part #T4845000 that you referenced with the InfiniteRule part #IR82FR. This is a pin lock that fits through the hole just behind the coupler portion that attaches to…
Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…
Hey Lawrence, thanks for reaching out. The Curt T-Connector #C56040 is correct for the 2025 Subaru Forester Hybrid. The factory harness plug should be in the rear cargo area behind the driver side access panel. If you remove the trunk floor covering…
Hey, Carl. There isn't one specific lock that would be for that coupler. I tried to find some sort of picture of even a drawing of the coupler to see what style would be best for it but I couldn't find anything out there. What I do know about…
Hey John, yes the flow through sensors like the part #TST-507-FT-S4 and the cap style like part #TST-507-RV-S2 both work with the 507 style monitor you have now. The flow through is generally the preferred style since it allows you to inflate through…
Hey John! We do have a lock for your Demco Channel Tongue Trailer Coupler #DM15945. Since this is a stamped 2" coupler you can use the InfiniteRule Trailer Latch Lock for Stamped Demco eZ-Latch Trailer Coupler #IR92FR. This is the best option,…
The only way to avoid using a reducer sleeve like the Curt #C45408 is to get a ball mount with a 3" shank and for that I recommend checking out the B&W Tow & Stow 3-Ball Mount #BWTS30049B which comes with the 3 common hitch ball sizes…
Hey Tim, we have the Trimax lock set part #TMX86SR that is a similar multi lock setup that comes with a locking hitch pin that is long enough for a 2-1/2 inch hitch like you have. These are all keyed alike as well. What are you towing?
Hey Rex. I've got a couple of great options for keyed alike hitch receiver locks. Which one you need is going to depend on what sizer receiver you have. I have listed the two options below: 3-5/8" Span for 2" and 2-1/2" Hitches -…
Hello Hal, Great question! It really would be nice if Toyota kept their receiver the same size as everyone else’s so any standard 2" lock would fit. The good news is that Infinite Rule actually made a lock specifically for the 2024+ Toyota…
etrailer Assists with InfiniteRule LocksOur team at etrailer helps you find the ideal InfiniteRule locks for your towing and security needs.With guidance on fit and installation, shopping InfiniteRule is hassle-free.Rely on etrailer’s expertise for InfiniteRule products.
InfiniteRule: Secure Locking Pins for Towing and Equipment
InfiniteRule provides high-security locking pins designed for towing and securing valuable equipment, offering peace of mind on the road.
