2012 Chevrolet Impala Vehicle Engine Heaters
Select Vehicle Style:
Filter Results Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 400 Watts - 28 mm
3.5L V6 Engine
Vehicle Heaters Specs:
- Engine Block Heater
- Frost Plug Style
- CSA Approved
- 400 Watts
Features:
This frost-plug heater replaces the frost plug in your engine block and submerges in the coolant to keep engine fluids from thickening. Results in easier start-ups, faster heating of your cab, and less wear and tear on your vehicle in cold weather.
Installation Notes:
OEM factory heater is thermostatically controlled; this product has a thermostat while part KH11455 is a heater without a thermostat
More Information > Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 400 Watts - 28 mm
3.9L V6 Engine
Vehicle Heaters Specs:
- Engine Block Heater
- Frost Plug Style
- CSA Approved
- 400 Watts
Features:
This frost-plug heater replaces the frost plug in your engine block and submerges in the coolant to keep engine fluids from thickening. Results in easier start-ups, faster heating of your cab, and less wear and tear on your vehicle in cold weather.
Installation Notes:
OEM factory heater is thermostatically controlled; this product has a thermostat while part KH11455 is a heater without a thermostat
More Information > Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 400 Watts - 28 mm
5.3L V8 Engine
Vehicle Heaters Specs:
- Engine Block Heater
- Frost Plug Style
- CSA Approved
- 400 Watts
Recommended Mounting Location:
Right Front
Features:
This frost-plug heater replaces the frost plug in your engine block and submerges in the coolant to keep engine fluids from thickening. Results in easier start-ups, faster heating of your cab, and less wear and tear on your vehicle in cold weather.
Installation Notes:
OEM factory heater is thermostatically controlled; this product has a thermostat while part KH11455 is a heater without a thermostat
More Information > Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts
3.6L V6 Engine
Vehicle Heaters Specs:
- Engine Block Heater
- Cartridge Style
- 400 Watts
Features:
This cartridge heater clips into the cavity of your engine block and submerges in the coolant to keep engine fluids from thickening. Results in easier start-ups, faster heating of your cab, and less wear and tear on your vehicle in cold weather.
Installation Notes:
OEM factory heater is thermostatically controlled; this product has a thermostat while part KH11810 is a cartridge heater without a thermostat
More Information > Kat's Heaters Ether Start Fluid Injection System - 1.6L to 4.9L Engine - 12V - Push Button
3.9L V6 Engine
Vehicle Heaters Specs:
- Fluid Injection Starter
- Push Button Operation
- 12 Volts
- 100 - 299 CID Engine
Features:
Simply push a button in your cab to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Connects to battery - no need to plug anything in. Thermostat ensures fluid is only dispensed when needed.
More Information > Kat's Heaters Ether Start Fluid Injection System - 1.6L to 4.9L Engine - 12V - Push Button
3.6L V6 Engine
Vehicle Heaters Specs:
- Fluid Injection Starter
- Push Button Operation
- 12 Volts
- 100 - 299 CID Engine
Features:
Simply push a button in your cab to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Connects to battery - no need to plug anything in. Thermostat ensures fluid is only dispensed when needed.
More Information > Kat's Heaters Ether Start Fluid Injection System - 1.6L to 4.9L Engine - 12V - Push Button
3.5L V6 Engine
Vehicle Heaters Specs:
- Fluid Injection Starter
- Push Button Operation
- 12 Volts
- 100 - 299 CID Engine
Features:
Simply push a button in your cab to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Connects to battery - no need to plug anything in. Thermostat ensures fluid is only dispensed when needed.
More Information > Kat's Heaters Ether Start Fluid Injection System - 4.9L to 8.2L Engine - 12V - Push Button
5.3L V8 Engine
Vehicle Heaters Specs:
- Fluid Injection Starter
- Push Button Operation
- 12 Volts
- 300 - 499 CID Engine
Features:
Simply push a button in your cab to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Connects to battery - no need to plug anything in. Thermostat ensures fluid is only dispensed when needed.
More Information > Kat's Heaters Ether Start Fluid Injection System - 4.9L to 8.2L Engine - 12V - 18 oz - Automatic
5.3L V8 Engine
Vehicle Heaters Specs:
- Fluid Injection Starter
- Automatic Operation
- 12 Volts
- 300 - 499 CID Engine
- 18 Oz Fuel Cylinder
Features:
Just turn your ignition to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Connects to battery - no need to plug anything in. Thermostat ensures fluid is only dispensed when needed.
More Information > Kat's Heaters Ether Start Fluid Injection System - 3.3L to 4.9L Engine - 12V - 18 oz - Automatic
3.5L V6 Engine
Vehicle Heaters Specs:
- Fluid Injection Starter
- Automatic Operation
- 12 Volts
- 200 - 299 CID Engine
- 18 Oz Fuel Cylinder
Features:
Just turn your ignition to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Connects to battery - no need to plug anything in. Thermostat ensures fluid is only dispensed when needed.
More Information > Kat's Heaters Ether Start Fluid Injection System - 3.3L to 4.9L Engine - 12V - 18 oz - Automatic
3.6L V6 Engine
Vehicle Heaters Specs:
- Fluid Injection Starter
- Automatic Operation
- 12 Volts
- 200 - 299 CID Engine
- 18 Oz Fuel Cylinder
Features:
Just turn your ignition to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Connects to battery - no need to plug anything in. Thermostat ensures fluid is only dispensed when needed.
More Information > Kat's Heaters Ether Start Fluid Injection System - 3.3L to 4.9L Engine - 12V - 18 oz - Automatic
3.9L V6 Engine
Vehicle Heaters Specs:
- Fluid Injection Starter
- Automatic Operation
- 12 Volts
- 200 - 299 CID Engine
- 18 Oz Fuel Cylinder
Features:
Just turn your ignition to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Connects to battery - no need to plug anything in. Thermostat ensures fluid is only dispensed when needed.
More Information > Kat's Heaters Ether Start Fluid Injection System - 3.3L to 8.2L Engine - 18 oz - Pull Cable
5.3L V8 Engine
Vehicle Heaters Specs:
- Fluid Injection Starter
- Pull Cable Operation
- 200 - 499 CID Engine
Features:
Simply pull a knob that installs in your cab to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Manual design means you get to choose when fluid is dispensed, and no electricity is needed.
More Information > Kat's Heaters Ether Start Fluid Injection System - 3.3L to 8.2L Engine - 18 oz - Pull Cable
3.9L V6 Engine
Vehicle Heaters Specs:
- Fluid Injection Starter
- Pull Cable Operation
- 200 - 499 CID Engine
Features:
Simply pull a knob that installs in your cab to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Manual design means you get to choose when fluid is dispensed, and no electricity is needed.
More Information > Kat's Heaters Ether Start Fluid Injection System - 3.3L to 8.2L Engine - 18 oz - Pull Cable
3.5L V6 Engine
Vehicle Heaters Specs:
- Fluid Injection Starter
- Pull Cable Operation
- 200 - 499 CID Engine
Features:
Simply pull a knob that installs in your cab to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Manual design means you get to choose when fluid is dispensed, and no electricity is needed.
More Information > Kat's Heaters Ether Start Fluid Injection System - 3.3L to 8.2L Engine - 18 oz - Pull Cable
3.6L V6 Engine
Vehicle Heaters Specs:
- Fluid Injection Starter
- Pull Cable Operation
- 200 - 499 CID Engine
Features:
Simply pull a knob that installs in your cab to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Manual design means you get to choose when fluid is dispensed, and no electricity is needed.
More Information >
Explore Expert Info
![Our Expert]()
on Vehicle Heaters
on Vehicle Heaters
Custom Fit Accessories For Your 2012 Chevrolet Impala
Towing
2012 Chevrolet Impala Trailer Hitch
2012 Chevrolet Impala Trailer Wiring
2012 Chevrolet Impala Brake Controller
2012 Chevrolet Impala Base Plate for Tow Bar
2012 Chevrolet Impala Vehicle Tow Bar Brake System
2012 Chevrolet Impala Vehicle Tow Bar Wiring
2012 Chevrolet Impala BOLT brand vehicle and hitch locks
Performance Accessories
2012 Chevrolet Impala Air Filter
2012 Chevrolet Impala Performance Chip Tuners
2012 Chevrolet Impala Vehicle Lights
2012 Chevrolet Impala Tire Chains
2012 Chevrolet Impala Fluid Filters
2012 Chevrolet Impala Cabin Air Filter
2012 Chevrolet Impala Lift Assist
Vehicle Trim
2012 Chevrolet Impala Floor Mats
2012 Chevrolet Impala Vehicle Covers
2012 Chevrolet Impala Side Window Vents
2012 Chevrolet Impala Vehicle Seat Covers
2012 Chevrolet Impala Replacement Mirrors
2012 Chevrolet Impala Windshield Wiper Blades
2012 Chevrolet Impala Windshield Covers
2012 Chevrolet Impala Vehicle Air Mattress
