Truck Grilles Specs:
Features:
Add to the curb appeal of your Dodge with Putco's polished aluminum, shadow billet bumper insert. Custom pieces install quickly and easily for a new and stylish look.
Installation Notes:
Does not fit Sport models
Bumper Insert fits vehicles without fog lights
More Information >Truck Grilles Specs:
Features:
Add to the curb appeal of your Dodge with Putco's polished aluminum, shadow billet bumper insert. Custom pieces install quickly and easily for a new and stylish look.
Installation Notes:
Does not fit Sport models
Bumper Insert fits vehicles without fog lights
More Information >Truck Grilles Specs:
Features:
Add some flair to your Ram with Putco's Flaming Inferno grille. This easy-to-install, stainless steel insert fits over your vehicle's existing grille for sizzling, custom styling.
Installation Notes:
Does not fit Sport models
More Information >Truck Grilles Specs:
Features:
Add some flair to your Ram with Putco's Flaming Inferno grille. This easy-to-install, stainless steel insert fits over your vehicle's existing grille for sizzling, custom styling.
Installation Notes:
Does not fit Sport models
More Information >Truck Grilles Specs:
Features:
Customize your Ram with this easy-to-install, stainless steel grille. With its mirror finish and heavy-gauge, punch design, this durable, rustproof insert offers up the style that your ordinary, factory grille lacks.
Installation Notes:
Does not fit Sport models
More Information >Truck Grilles Specs:
Features:
Customize your Ram with this easy-to-install, stainless steel grille. With its mirror finish and heavy-gauge, punch design, this durable, rustproof insert offers up the style that your ordinary, factory grille lacks.
Installation Notes:
Does not fit Sport models
More Information >Videos
for Truck Grilles
Help Articles
for Truck Grilles
Expert Answers
for Truck Grilles
The Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV will be just fine if you need to lift your 2022 Ford F-250 Super Duty, but it will be good practice to lower the psi rating to 5 prior to lifting the truck. I confirmed this…
view full answer...You will want the hitch to be set at the height that 1) allows the trailer to be level, and 2) allows you a minimum of 6 inches between the bottom of the trailer loft and the top of the bed rails. The fifth wheel hitches offer several inches of up…
view full answer...When adjusting the arms of the #BWRVK3305, you have the option of setting up so the king pin will sit 3 inches forward or 1 inch forward of the axle. I'd set it up at the tallest height, 18-3/4 inches above the floor of the truck bed and 1 inch…
view full answer...To install a 7-Way harness on your 1996 Dodge Ram without the factory connector, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Since you can be looking at a max weight capacity of 14K you need a tire rated for at least 3.5K so that it can accommodate up to that weight. For your application I recommend using the Kenda Karrier ST235/85R16 Radial Trailer Tire #AM10295 because…
view full answer...Great question! The 2 gallon container of EXP90 adhesive included with the LaSalle Bristol XTRM Roof Install Kit #3442703414KIT will cover about 400 square feet (200 square feet per gallon).
view full answer...The P3 brake controller, #90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off,…
view full answer...We do have tonneau covers that will be better when hauling a 5th wheel. Folding covers are not the best option because when folded up it sits above the bed rails quite a bit. This could result in damage to your trailer, the tonneau and your 2019 Ford…
view full answer...The BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish, #BAK48330, is a quad-fold cover. I reached out to my contact at BAK industries and for your 2017 Ford F-250 Super Duty with 6-3/4 foot bed, the depth of all the folds together is…
view full answer...The Demco Hijacker Autoslide 5th Wheel Hitch w/ Slider - Single Jaw - Ford Super Duty Prep Package - 18K, part #DM8550024, weighs approximately 305 lbs.
view full answer...The Demco Hijacker Autoslide fifth wheel hitch part #DM8550024 that you referenced weighs 304 lbs.
view full answer...Filter Products (12)
Contact and Help
What our customers are saying:
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD