Swap in 8 inch long hinges when you're rebuilding trailer doors or compartments. Choose stainless steel or zinc plated to suit the conditions; stainless on an aluminum frame is fine if you isolate the metals to prevent galvanic corrosion. Some 8 inch zinc plated hinges have no listed weight capacity, so focus on fit—compare strap length and width, mounting hole spacing, and hinge pin diameter to your originals.
If you need 270 degree rotation, the shortest option mentioned is 12 inches, not 8 inches. For an 8 inch long hinge, plan on standard swing unless the listing clearly states 270 degrees. Confirm the rotation spec before you buy, especially if the door needs to lay flat against the side.
Yes, stainless on aluminum is generally fine, but isolate the metals to help prevent galvanic corrosion. Add a thin plastic isolator between the hinge and the frame; simple gardening plastic works. Also use compatible hardware and sealants so dissimilar metals don't make direct contact.
Some 8 inch zinc-plated hinges list no weight capacity. If no rating is provided, choose by size match and use enough hinges for your door's weight. For heavy doors, verify pin diameter and construction, and add a third hinge if your door is tall or loaded with gear.
Mounting hardware typically isn't included. You'll need to supply bolts or screws that match the hole size on your hinge and door structure; some brackets have 3/8 inch holes. Choose stainless or zinc hardware to match your hinge material and use washers and lock nuts where needed.
Match the overall strap length to 8 inches, then compare strap width, bracket height, and hole spacing to your current hinge. Check pin or barrel diameter too; some 8 inch hinges use a 1/2 inch pin. Even small differences in hole spacing can cause alignment issues, so measure center-to-center before you drill or bolt up.
Filters
