rv slide out parts

Hey Jim. You can email whatever pictures you'd like me to look at directly to the email address you receive this response from. We do have a couple of wiper seals that are close to the measurements you have described. I've listed them below:…

The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, #LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side, #LC26VR, will of course be the right side as facing…

Hey Eric, thanks for the information! Your older GE ARC13AACBL2 with 410a refrigerant is not going to be compatible with any AC components that came out this year. Everything has the new R32 refrigerant now so it's made all the 410a systems and…

Hey Bill thanks for the information. The C865H-9/16 in that axle tag number means you have 8 on 6-1/2 hubs with 9/16" lug studs. The Hydrastar item #HSE7K-T1, you were looking comes with 1/2" lug studs. You'll need the Hydrastar Disc…

Unfortunately, I cannot tell you what wiper seal you would need for your 2004 Keystone Outback. This is not something that is known just from the RV information. It depends on your particular slide-out. The best way to determine what wiper seal you…

Hey Brad, thanks for reaching out! What are the dimensions of your tail lights? The numbers and letters you gave me have to do with the testing that the lights have undergone as opposed to a part number. Let me know what measurements you find!

The piece you're referring to in the #LC26VR kit is called a "shoe". This part is plastic with foam pads on each end that helps cushion the motor bracket as it slides back and forth to either end of the track.

The Fixed Dual Rack Repair Kit #LC84FR goes on the left side of the slide as you look at the slide out from the outside of the camper. So on the drivers side it will be the front of the slide. The Floating Dual Rack Repair Kit #LC26VR is going to be…

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

Currently Lippert does not make a replacement gear for your Lippert 18:1 Venture Actuator Slide-Out Motor #LC132682. While there are different manufacturers for different types of slide outs used on campers they generally have their own unique style…

Hey Scott, thanks for the pictures! To replace your Klauber 500 series slide-out motor you'll need the Lippert RV Slide-Out Motor by Klauber item #LC130057. Does your motor have a connector at the end of the wires or are they spliced in?

The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…

Hey Jim. You can email whatever pictures you'd like me to look at directly to the email address you receive this response from. We do have a couple of wiper seals that are close to the measurements you have described. I've listed them below:…

The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, #LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side, #LC26VR, will of course be the right side as facing…

Hey Eric, thanks for the information! Your older GE ARC13AACBL2 with 410a refrigerant is not going to be compatible with any AC components that came out this year. Everything has the new R32 refrigerant now so it's made all the 410a systems and…

Hey Bill thanks for the information. The C865H-9/16 in that axle tag number means you have 8 on 6-1/2 hubs with 9/16" lug studs. The Hydrastar item #HSE7K-T1, you were looking comes with 1/2" lug studs. You'll need the Hydrastar Disc…

Unfortunately, I cannot tell you what wiper seal you would need for your 2004 Keystone Outback. This is not something that is known just from the RV information. It depends on your particular slide-out. The best way to determine what wiper seal you…

Hey Brad, thanks for reaching out! What are the dimensions of your tail lights? The numbers and letters you gave me have to do with the testing that the lights have undergone as opposed to a part number. Let me know what measurements you find!

The piece you're referring to in the #LC26VR kit is called a "shoe". This part is plastic with foam pads on each end that helps cushion the motor bracket as it slides back and forth to either end of the track.

The Fixed Dual Rack Repair Kit #LC84FR goes on the left side of the slide as you look at the slide out from the outside of the camper. So on the drivers side it will be the front of the slide. The Floating Dual Rack Repair Kit #LC26VR is going to be…

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

Currently Lippert does not make a replacement gear for your Lippert 18:1 Venture Actuator Slide-Out Motor #LC132682. While there are different manufacturers for different types of slide outs used on campers they generally have their own unique style…

Hey Scott, thanks for the pictures! To replace your Klauber 500 series slide-out motor you'll need the Lippert RV Slide-Out Motor by Klauber item #LC130057. Does your motor have a connector at the end of the wires or are they spliced in?

The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…