Thanks for reaching out Kathleen. The TorkLift Custom Frame-Mounted Tie Downs #TL66ZV include the complete set of front and rear tie-downs for both the driver and passenger sides of your truck. This kit is the correct fit provided your Toyota Tacoma…
I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…
Hello Morgan, Great question! The etrailer Over-The-Cab Truck Ladder Rack - Steel - 1,000 lbs #e78FV is going to be a great fit for your 2026 Ram 2500 whether it has a 6 1/2' bed (without Rambox) or an 8' bed. With the etrailer Over-The-Cab…
Hey Jeff, great question! Choose the 2,000 lb model if you tow larger travel trailers, enclosed trailers, dump trailers, equipment trailers, or other heavy-duty trailers with tongue weights that could exceed 1,000 lbs. It works for lighter trailers…
Hey Robert, yes the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855 that you referenced will fit the T slots of the BAK Revolver tonneau cover that you have. What are you planning on carrying on the…
Hey Connor! Yes, the Curt Dual Ball Attachment for Weight Distribution Shanks #C69NR will work with an Equal-i-zer shank. This fits standard WDH shanks with 2-1/2" hole spacing. The #EQ90-02-4500 has 1-1/4" spacing, so every two holes is…
Hey David! The length of the tangs on the 2-Tang Clevis Attachment #BW54KR is 5.19". The distance between the tangs is 2" and the hole diameter is 1.11".
Hey Rob, I’d be wondering the same thing if I came across a ball mount made out of aluminum like the #BPH77MR while researching. Totally fair question. That said, I haven’t seen any noticeable difference in slop or wear compared to their steel…
I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like your Fedex step van are multi-fit RV hitches like the #41990 that has a 16k capacity. This is a weld on hitch that would require…
Hey Mike! The Curt #C59496 is a universal splice-in wiring harness. The Curt T-Connector Vehicle Wiring Harness #C56403 is a custom wiring harness so it plugs into the connection points at the rear without any need for splicing. Since the custom…
Hi Eric! The Dylux RV Tankless Water Heater #DY54FR does have auto frost protection, which activates when the temperature drops below close to freezing temps. That’s a helpful feature for chilly nights while the RV is in use. I would not treat that…
Hi Raymond! I have a couple options you may be interested in, but that's quite a conundrum. I do know there are no 4 bike racks that can hold a spare tire as well as the bikes, but you may be able to use a cargo carrier, like the 24x60 etrailer…
WeatherTech hitch steps give you a sturdy boost and added bumper protection. Pick a compact step or a wider option if you want more standing room, and keep in mind the attachment style—bolt-down setups can limit play while a standard hitch pin may allow some movement. These often work without affecting backup cameras or sensors, and a hitch pin may be sold separately. Mount it deep in the receiver to reduce flex.
WeatherTech offers narrower steps around 11 1/2 inches and wider options around 23 1/2 inches. Wider steps give a larger platform, while some versions use a bolt that tightens against the receiver to reduce play; standard hitch pins can allow some play. If rattle reduction matters, look for versions with a tightening bolt or add anti-rattle hardware when available.
They are sturdy and well made, but some flex can be felt, especially when stepping on the ends. Insert the shank as deep as you can to reduce flex. Step near the center for the most solid feel. If using a locking pin, check key fit and function over time to avoid issues. Also verify if a hitch pin or linchpin is included or sold separately.
WeatherTech hitch steps are designed for 2" hitches. Verify your receiver is 2" before ordering. If your hitch is 1-1/4", this size will be too large. Measure the inside of your receiver opening to confirm. Also check your hitch pin hole placement to ensure the step can insert fully.
It should not interfere with the backup camera or reverse sensors in most cases. It typically does not stick out far enough to affect them. Since every vehicle is different, confirm by comparing it to how a ball mount shows up on your vehicle. If visibility matters to you, note that you may see the step in the rear view, but it won't block a large part of the view.
Filters
