Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hello Dale, thanks for reaching out. We do have a few options for an exterior utility/loading light. Take a look at the following: - Gustafson 12V LED RV and Utility Light - 8" Long - Black #277-000493 - Opti-Brite LED Interior Strip Light -…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hey Gwen! The distance from the center of the mounting hole to the bottom of the Trailer Valet JX Trailer Jack #TV35FR when fully retracted is 13.44". If you’re measuring from the bottom of the pipe mount instead of the center of the hole, that…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Anthony! The outer diameter of the weld-on pipe coupling on the Trailer Valet JX Trailer Jack #TV35FR is 2.01". I went ahead and attached some dimensional drawings below for your reference. What kind of trailer do you have?
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
Illuminate Your Space with Incandescent Rectangle Work Lights
Discover the versatility of incandescent rectangle work lights. Perfect for interior applications, these lights offer a warm glow ideal for dim environments. While not suited for exterior use due to lack of gasketing, they can be upgraded with LED bulbs for brighter illumination.
Incandescent rectangle work lights provide a warm, soft light that's perfect for indoor settings where you need illumination without harsh glare. They're great for areas where a subtle light is needed, and you can easily swap the bulb for an LED if you need more brightness.
These lights are not ideal for outdoor use as they lack gasketing to protect against water. They're best used indoors or in covered areas where moisture isn't a concern. For outdoor applications, consider adding a protective cover or opting for a different light type.
Installation is straightforward and user-friendly. Many find the process simple, with the lights fitting well into existing setups. However, some adjustments might be needed if replacing older models, especially if the previous lights were of a different size or standard.
Yes, you can increase the brightness by replacing the incandescent bulb with an LED equivalent. This not only boosts the light output but also improves energy efficiency, making it a practical upgrade for those needing more illumination.
Consider the environment where you'll use them. They're perfect for indoor or covered spaces. Check the size compatibility if replacing existing lights, and think about upgrading to LED bulbs for more brightness and efficiency. Their sturdy build ensures durability in various settings.
Exterior Lights
Interior Lights
Work Lights Parts or Accessories
Filters
