Hey Marty. Caliber lists the weight capacity for their Edge Glide XL Transition Plates item #CA47EJ as matching your trailer's ramp door. So whatever your ramp door capacity is is what transition plates will sport. The 4-pack has a combined…
Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…
Hey Bill, thanks for reaching out. I just went out to our warehouse and measured the Replacement Left/Curb Side Leg for etrailer and Ram Hydraulic Jack #e63VV. The outer tube is 4-1/2" square. The inner tube with the foot is 4".
Good question, Tina - you’re in the safe zone with the M-3 aluminum plate #M348FR. It’s 3/16 inch thick and fully welded across the piano hinge (some cheaper ones are just bolted instead of welded), so even with heavy mowers or small tractors, it…
Hey Jeff! It has more to do with the roof structure of a utility trailer than anything. As long as you have the proper bracing in place you'll be just fine installing the 13,500 Btu Advent Air RV Air Conditioner System #ADV95SR on your trailer.…
Hey Brandon! Yes, either M-3 transition plate (steel #M368FR or aluminum #M348FR) will do the job, but I’d go aluminum #M348FR since it’s easier to trim and won’t rust if water gets in that recessed area. Just mount it across the lower edge of the…
Lisa, the HomePlow #ME53FR uses a true hydraulic lift and power-angling system, so it can apply real down pressure when you hold the lower control. That’s the main advantage over the electric HomePlows like the ##ME28FR and #ME88FR, which only lower…
Kyle, the HomePlows like #ME53FR lift about 8" in travel mode, while the WingMan #ME35FR lifts closer to 10" thanks to its larger hydraulics. That’s plenty to clear curbs or the edge of your apron. If your slope’s steep, you’ll appreciate…
Hello Dean, thanks for reaching out. We currently carry only the one transition plate, the etrailer Enclosed Trailer Transition Plate #e32JR. This is adjustable and has a maximum overall width of 82". it is made of steel. Sadly, we do not make…
I'd go with a double spring personally, Scott. These are typically going to be used on more heavy duty applications like your enclosed trailer with a pretty heavy door. In order to get a proper replacement though, you'd need measure the width…
Hey Tom! The Red Trimax King Pin Lock #TMX36RR and the Yellow Lock #TMX56RR are literally the same lock, just with different colors. I'm not sure why there's a price difference like that, but usually I tell people to take advantage of the…
Nick, absolutely. Many vanlifers wire the Velit 2000R 12V AC Unit #VE87QV so it runs while the alternator tops off the batteries. It keeps the living space cool while driving long stretches, and when you park, your bank’s already partly replenished.…
Hey Marty. Caliber lists the weight capacity for their Edge Glide XL Transition Plates item #CA47EJ as matching your trailer's ramp door. So whatever your ramp door capacity is is what transition plates will sport. The 4-pack has a combined…
Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…
Hey Bill, thanks for reaching out. I just went out to our warehouse and measured the Replacement Left/Curb Side Leg for etrailer and Ram Hydraulic Jack #e63VV. The outer tube is 4-1/2" square. The inner tube with the foot is 4".
Good question, Tina - you’re in the safe zone with the M-3 aluminum plate #M348FR. It’s 3/16 inch thick and fully welded across the piano hinge (some cheaper ones are just bolted instead of welded), so even with heavy mowers or small tractors, it…
Hey Jeff! It has more to do with the roof structure of a utility trailer than anything. As long as you have the proper bracing in place you'll be just fine installing the 13,500 Btu Advent Air RV Air Conditioner System #ADV95SR on your trailer.…
Hey Brandon! Yes, either M-3 transition plate (steel #M368FR or aluminum #M348FR) will do the job, but I’d go aluminum #M348FR since it’s easier to trim and won’t rust if water gets in that recessed area. Just mount it across the lower edge of the…
Lisa, the HomePlow #ME53FR uses a true hydraulic lift and power-angling system, so it can apply real down pressure when you hold the lower control. That’s the main advantage over the electric HomePlows like the ##ME28FR and #ME88FR, which only lower…
Kyle, the HomePlows like #ME53FR lift about 8" in travel mode, while the WingMan #ME35FR lifts closer to 10" thanks to its larger hydraulics. That’s plenty to clear curbs or the edge of your apron. If your slope’s steep, you’ll appreciate…
Hello Dean, thanks for reaching out. We currently carry only the one transition plate, the etrailer Enclosed Trailer Transition Plate #e32JR. This is adjustable and has a maximum overall width of 82". it is made of steel. Sadly, we do not make…
I'd go with a double spring personally, Scott. These are typically going to be used on more heavy duty applications like your enclosed trailer with a pretty heavy door. In order to get a proper replacement though, you'd need measure the width…
Hey Tom! The Red Trimax King Pin Lock #TMX36RR and the Yellow Lock #TMX56RR are literally the same lock, just with different colors. I'm not sure why there's a price difference like that, but usually I tell people to take advantage of the…
Nick, absolutely. Many vanlifers wire the Velit 2000R 12V AC Unit #VE87QV so it runs while the alternator tops off the batteries. It keeps the living space cool while driving long stretches, and when you park, your bank’s already partly replenished.…
Great service! I really liked the feedback from different individuals as my order was processed. By keeping me in the loop I knew what was happening to my order and it really personalized the buying experience.
Michael
Round Rock, TX
Paneloc Spring Latches: Secure Your Trailer with Confidence
Explore the reliability of Paneloc spring latches for your trailer door. Known for their durability and ease of use, these latches ensure your trailer door stays securely closed, even on bumpy roads. Perfect for enthusiasts who value security and convenience in their trailer door parts.
Paneloc spring latches are designed to provide a strong, reliable hold, ensuring your trailer door remains closed during transit. Their robust construction withstands vibrations and impacts, making them ideal for long hauls and rough terrains.
These latches feature a simple, intuitive design that allows for quick and easy operation. The spring mechanism provides a smooth action, making it effortless to secure or release the latch, even with gloves on.
Absolutely, Paneloc spring latches are built with high-quality materials that resist rust and corrosion, ensuring longevity even in harsh weather conditions. This durability makes them a reliable choice for outdoor and off-road adventures.
Yes, these latches are versatile and can be installed on a variety of trailer door types. Their universal design fits most standard doors, making them a convenient upgrade for enhancing security across different trailer models.
Minimal maintenance is needed. Regularly check for debris and clean with a mild detergent to ensure smooth operation. Lubricating the spring mechanism occasionally will keep it functioning optimally, extending the latch's lifespan.
Filters
