Keep gear off the floor and easy to reach with racks, holders, wall-mount hitches for storing 2" bike racks, and e-track add-ons. Lightweight aluminum options are easy to handle, and e-track baskets and hooks let you unclip and reclip to fine-tune placement. For solid installs, mount to structure when you can; swap self tappers for longer bolts, washers, and lock nuts, or use u-bolts on round bars.
Upgrade light hardware if needed. Self-tappers can be replaced with longer bolts, washers, and lock nuts for peace of mind. Trailer motion can loosen small lag screws or stress brackets, so through-bolt where possible, distribute weight, and inspect fasteners and welds regularly—especially after the first few outings.
They work well to get hitch bike/ebike racks off the floor. Mount into a wall stud, drill a 1/8" pilot hole, and drive the 7 mm hex head lag bolts. Verify the wall can support the rack's weight and lock the accessory in to reduce movement.
Yes, you can use U-bolts to secure gear racks to round rails. Some kits don't include mounting hardware, so source U-bolts sized to your rail diameter. Tighten evenly and recheck after your first trip to keep things from shifting.
Match the rack to your trailer's roof and load. Some adjust horizontally to fit 4-feet to 8-1/2-feet wide roofs and list 200-lb or 400-lb capacities. Many install to rain gutters and have a fixed height based on gutter position. Check that your trailer has gutters and confirm the load you plan to carry.
Use a track-mounted system with rivet-mounted roof tracks, matching legs, and crossbars. This avoids relying on gutters and works with slightly curved, aluminum-skin roofs with internal ribs. In some cases a ladder rack may still fit, but confirm roof structure and attachment points before drilling.
Cabinets and Shelves
Hooks and Hangers
Tool Rack
Trailer Cargo Organizers Parts or Accessories
Filters
