Enclosed Trailer equipment racks feature a hook design at the top of the rack that allows them to hang from the metal frame runner at the top of the side walls on the trailer for added strength. They are predrilled so that they may be screwed securely to the wall. The unique and durable "Hammered" paint finish will last for many years.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our trailers we're going to take a look at the install and operation of the Rack 'Em beverage cooler rack for enclosed or open trailers, part number RA-18. This holder can hold three or five-gallon water cooler or tank sprayers. Has a unique, durable, hammered-paint finish to prevent rust and corrosion. Now for enclosed trailers we're going to use the two pieces. We've got a hook side that will hook to the top of the wall, or in this case there's been a piece of 2 by 6 added to our wall that's been back cut on a 45 to allow for the hook to attach to the 2 by 6 instead of the top of the wall. It's got the button-style hook here on the top piece, and then our bottom piece has the round hole and slot. We can simply slide it into place.
Now that by itself is enough to hold it to the wall. However, we also have some pre-drilled holes where we can use some screws to really hold it tight to the wall. Next we'll go ahead and load up our water cooler and set it up onto the rack, bring the strap around, and feed it into the buckle. Now with both straps secured our water cooler is nice and secured to the wall so it's up and out of the way. Here on our open or utility trailer we've got our pre-drilled mounting holes here in the bottom that we can use to secure it to the top rail. There's actually a couple pre-drilled holes that line up real nicely. Now you do note that the hardware is not included.
Now once we have it secured to our trailer we'll go ahead and set our cooler in place. Once I have them pulled tight going to take the excess and secure it underneath the strap, and we're ready to hit the road. That will conclude our install and operation of the Rack 'Em beverage cooler rack for enclosed or open trailers, part number RA-18. .
Before I bought several racks from these guys my enclosed trailer was a disaster tools were getting broken all the time it took me forever to find the tool I needed now with there is racks everything has it’s own place and I can actually walk through my trailer now with out falling over everything it still has the tools in it and I can get what I want with out searching definitely recommend these racks there awesome
Great product, great customer service, and easy installation. I own a lawn care company and tried these for our trailers, works great, no more sliding cooler or lifting and moving it around to get to.
Great Solid Product and would recommend to anyone!! Delivery of product was in less than a week!!! Awesome job etrailer and I will be shopping with you in the future for all my landscaping needs!!
This product made getting to the water cooler alot easier and would recommend this to anyone that wants to hang the cooler.
The product seems solid. I just mounted them today and everything looked good. The only suggestion I have would be to add a screw you can use to put in the bottom to help hold the mounts on the wall and keep from sliding.
The clips broke off within 4 months.
Great product. Does the job.
works very well. holds jug tight
Racks work great! Bought another set.
I think this item is a great
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.