Hey Troy, I will send this out to Dexter to see if they can ID what you have but for replacement part purposes both use the exact same replacement parts so if you are in a hurry you can interchange the parts as needed. What are you looking for?
Hey it sounds like you are on the right track here, Blake. The Kodiak Disc Brake Caliper #KDBC225DAC is exactly what we recommend for replacing the Tie Down 46304 calipers. We have confirmed on multiple occasions that the Kodiak caliper is a suitable…
As you may have already found, 5200 lb, 6000 lb and 7000 lb axles can all use the same components including inner/outer bearings, hubs and brakes. Here are some other things they share in common: Dexter 5200 lb Regular Duty Axle - 0.180 inch tube…
Depends on the capacity Dexter axle you have. If your 12 inch drum axles are 6k rated the magnet you would need as a replacement is the part #BP01-180. If instead you have a 7k axle the correct magnet is the part #BP01-225.
The Trailer Brake Magnet, #BP01-225, that you have referenced is designed for use with 12 x 2 inch Dexter electric drum brakes for 7,000 pound capacity axles. A similar magnet, #BP01-180, fits Dexter 6K, Alko 6K and 7K after 1988 (excluding…
The Trailer Hub & Drum Assembly #8-388-80UC3 you were looking at is designed specifically for 42mm Dexter Nev-R-Lube axles and you do not grease any of the components. This hub has sealed bearing cartridges which do not get greased. Now if you…
Thanks for the photo, and you are correct, you do indeed have a Dexter 7,000 lb axle, and are also correct regarding the shoes and magnets for Dexter 7k electric brakes, the Replacement Shoe #DX28FR and Replacement Magnet #BP01-225. That said,…
Not a stupid question at all. The Dexter Trailer Hub & Drum Assembly, part #8-388-80UC3 is sold individually. If you find that down the road the inside of the drum is scored it can be resurfaced. The cartridge bearing for this assembly is part…
In order to find the correct replacement hubs for your EZ Loader boat trailer you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped…
Hey Carlos, the closest option we have would be the Tandem Axle Jeep Style Trailer Fenders part #HP62VR which is 72 inches long and 10 inches wide. It is also diamond plate like you wanted but it is not painted.
I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex
Alex
Blowing Rock, NC
18 Feet Long Tarps built for tough jobs
Count on a durable, heavy-duty tarp when you need it most. At 18 feet long, it offers generous coverage and is smart to keep on hand for emergencies. Tough and straightforward to use, it does the job as advertised.
They are very durable and heavy duty, as advertised. Choose heavy duty when you want a tougher cover. If you plan frequent use, stick with the heavy duty option mentioned.
Yes, keeping tarps on hand just for emergencies is a good idea. Pick the length that fits what you may need to cover. Go with heavy duty when you want more durability.
Choose 18 Feet Long when you want more coverage in one piece. Measure what you plan to cover and compare to 18 feet in length. If durability matters, look for heavy duty.
Yes, it's described as very durable and heavy duty. That suits repeated use where toughness helps. Check the tarp before each use and match the length to the job.
Filters
