Do Dexter 5,200 and 6,000 lb Axles use Same Replacement Parts

Question

Question:

I’m wondering if my trailer axels are 5,200 or 6,000’s. Serial number: D5382840 Thanks for your time!

asked by: Troy C

0

Expert Reply:

Hey Troy, I will send this out to Dexter to see if they can ID what you have but for replacement part purposes both use the exact same replacement parts so if you are in a hurry you can interchange the parts as needed. What are you looking for?

expert reply by: Jameson C

0

Jameson C.

12/29/2025

Hey Troy, were you able to hear back from Dexter about your trailer axles? Knowing what they confirmed could help others trying to match parts for similar setups.

Answer 1

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 2

Hey Kyle! The Pacbrake Alpha HD Air Bag Suspension Kit #PB22RV installs in the same location as most fifth wheel and gooseneck brackets. I would expect to have to do some drilling to install these with your B&W Turnoverball. Instead, I recommend…

view full answer...

Answer 3

Hey Noe, the Advent Air Ceiling Assembly Air Box part #ADV48SR that you referenced will only work with Advent Air AC units that were made after January 1st of 2025 due to changes in the refrigerant requirements that were enacted on that day. If you…

view full answer...

Answer 4

You are close. The Replacement Magnet for Dexter 12-1/4" x 5" Electric Brake Assemblies #BP01-306 you were looking at are for brake assemblies that are 12-1/4" in diameter, and 5" deep measure on the inside of the drum. You can…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

The difference between these two parts comes down to the size of the brake assembly and hubs that are on your axles. The #AKBRKR-M10 that has green wires are designed for 10" electric brake assemblies, where the #BP01-225 are designed for…

view full answer...

Answer 7

As you may have already found, 5200 lb, 6000 lb and 7000 lb axles can all use the same components including inner/outer bearings, hubs and brakes. Here are some other things they share in common: Dexter 5200 lb Regular Duty Axle - 0.180 inch tube…

view full answer...

Answer 8

Hey Rick, thanks for reaching out. The #BK2-100 bearing kit is correct for your 3,500 lb axle with #84 spindle. Spindle sleeves are not included but we do have them available separately as part #BB60010 (1 pair). For that you'd need a 1-1/2"…

view full answer...

Do Dexter 5,200 and 6,000 lb Axles use Same Replacement Parts

Product Page this Question was Asked From

Continue Researching