Correct Grass Catcher for Wright Stander Lawn Mower

Question

Question:

Which grass catcher do I need for a wright stander 36 inch stander I

asked by: Andy

0

Expert Reply:

The correct grass catcher for your Wright Stander lawn mower is the Rack'em Grass Catcher for Wright Stander Lawn Mower # RCMMS4-BS2.

I have added links to a couple video reviews of this grass catcher for you to check out as well.

expert reply by: Kyle S

0

Answer 1

Hey Marco, welcome back. You can replace the faceplate to the item #RCMMS4-BS2 you purchased with the Rack'Em Face Plate for Wright Stander Lawn Mower item #RMBS2. How did you break one of the brackets?

view full answer...

Answer 2

So normally for a Wright Stander mower you'd want the RackEm grass catcher part #RCMMS4-BS2 and for the Toro 52 grandstand you'd want the #RCMMS4-EXS1-TORO. What you could do is use the #RCMMS4 which fits both as the main catcher assembly and…

view full answer...

Answer 3

Hey Kyle, the correct Grass Catcher for your Scag Liberty Z48 is the part #RCMMS4-OBS1 that you referenced.

view full answer...

Answer 4

I checked with Rack'em and the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mowers part #RCMMS4-EXS1 will fit an Exmark Metro with 36" deck. It also fits the models with a 48" and 52" deck.

view full answer...

Answer 5

If your Toro Timecutter has the Z cut deck that extends out further than the rear wheel, you'd use the Rack 'Em #RCMMS4-EXS1-TORO catcher. If you have the regular deck, you'd use #RCMMS4-EXS1. The Z deck has notches or slots in it as…

view full answer...

Answer 6

I do have Rack'em Grass Catchers for certain Kubota mowers which you can see listed in the photo below. These mowers will use either the Rack'em Grass Catcher part #RCMMS4-OVBS1 or the part #RCMMS4-EXS1. If the model you have is not listed…

view full answer...

Answer 7

Hey Fredy, thanks for the information! I checked with Rack'em and for your SCAG SWZT61H-22FSE Hydro mower with the 61” Hero Cutter deck you will need their Rack'Em Grass Catcher item #RCMMS4-OBS1. You will also need the RB-DP mounting…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Correct Grass Catcher for Wright Stander Lawn Mower

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching