Measure your camper's length to choose the right truck camper cover, and allow a little extra for rooftop gear or a ladder. These RV covers are designed to accommodate accessories like an air conditioner, and options with vents, zippered door access, and adjustable straps help manage wind and make entry easier. If your jacks are swung out, look for some slack so the cover isn't pulled tight around them.
Zippered door panels make access easier, and rolling them up goes smoother with two people. A dowel at the door bottom can help it roll cleanly. Before you climb up, check the orientation so you don't have to flip the cover on the roof. If you need longer-life protection, look for a multi-layer top panel and roof vents to help with breathability.
Pick a size range that matches your camper's measured length. Measure the camper itself and account for anything that adds length like a rear ladder. Allow for rooftop accessories so the roof panel isn't pulled short. If you end up with some extra material, tuck and strap it down to keep things tidy.
Tighten the straps so the cover doesn't flap, but don't over-tighten on friction points. Wind is the main enemy, so use all tie-downs and add straps under the cab-over if needed. Pad gutters and sharp edges; short pieces of pool noodle work well. If you need more tie-down points, consider adding eyelets along the bottom edges.
Yes, these are designed to accommodate rooftop accessories with some slack. Still, check height and clearances so the cover isn't stressed over an AC or panel. If the roof seems short once installed, recheck size selection and how the cover is positioned front to back.
It can, but confirm the added width with the jacks swung out. Some covers include ties for the 4 jacks while others don't, so verify jack tie features before you buy. If the front cab-over wants to lift, use the front fasteners and run straps to the front jacks to help keep it in place.
Filters
