Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…
Hi Guy, That's a great question, and thank you for providing so much detail. It really helps narrow things down. Based on your description, it sounds like you may have cruiser style or step through bikes with front baskets, and that combination…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
Hey Steven! For your 2023 Jayco Eagle 355MBQS I recommend the Hollywood Racks RV Rider Bike Rack #HLY64FR. This is rated for 5th wheel use and has a capacity of 80 lbs per bike so it works with standard bikes and e-bikes. It also uses padded clamps…
Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount -…
Hey Scott. The Lets Go Aero Jack-E Bike Rack item #LGA92ZR does not swivel and doesn't have a simple process for swapping out propane tanks. You'll need to remove the bolts attaching the tray to the supports to be able to remove your propane…
Hey Ginger! The Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack #LGA92ZR requires minimum of 24-1/2" from center of jack hole to the front of the camper itself, so if you have 25" then you are right there and it would…
THey Brian, the Coleman Mach Signature Mach 15 part #CM32RR is a really solid AC unit. As far as how it compares to the Furrion Chill Cube #FR69TD it only has the advantage of working more consistently with furnace controls. Aside from that the Chill…
Thanks for reaching out Ian. Rather than using a universal reducer sleeve like the Curt Reducer Sleeve - 2" Hitch to 1-1/4" Shank #C49WQ, I'd recommend the Kuat Bike Rack Shank Adapter #D101. This adapter is designed specifically for…
Hey Tony, you would need to go with an E-bike rack that is rated for the rougher ride quality at the rear of RVs like what you have like with the Lets Go Aero part #LGA25VR . What e-bikes do you have?
Hey Brett, the Lets Go Aero Jack-E Bike Rack for Electric Bikes #LGA92ZR that you referenced was designed to fit above propane tank covers like you can see in the attached picture. I don't see how it could fit behind the handles you have on that…
There sure is Fran and welcome back! The Blue Ox Tow Bar Cover item #BLU53QV is exactly what you need. This cover will fit the Blue Ox Alpha Non-Binding Tow Bar item #BX7380 perfectly. The Blue Ox Tow Bar Cover item #BLU53QV is made of heavy duty…
Very easy process, good prices and my products were shipped on time and were delivered on time. The instructional videos online helped make installation easy!
Ryan
Portland, OR
RV and Camper Bike Racks with hitch rack for 2 bikes
Set up an RV hitch rack built to carry 2 bikes securely on the road. If you run e-bikes or step-through frames with fenders, look for frame or seat-post clamps; some setups may need an adapter bar. For travel trailers or flat-tow use, pick RV-approved designs to handle the extra movement and keep everything steady between campgrounds.
Yes, but confirm the rack is approved for RVs and travel trailers. A reinforced shank is commonly used for these applications. Some racks change their per-bike capacity when used behind an RV, so check that detail. Mount the heavier bike closer to the vehicle when possible; if fit forces the opposite, recheck hook lengths and contact points for a secure hold.
Assembly is doable but can take time, and instructions can be tricky. Plan to adjust each bike's position relative to the other until everything clears. For low step-through frames, ensure the bracket or hook reaches low enough; if not, use a frame adapter or choose a rack that clamps to the seat post. Do a test load and short drive to confirm your adjustments.
Look for an RV-approved design and a solid anti-rattle connection to help reduce movement. A threaded hitch bolt can tighten the shank in the receiver. Expect some jostle; snug the hooks/straps and add a security cable if included. Verify folded clearance to your bumper, and make sure any tilt or fold levers are fully locked before driving.
Yes, but match the hold style to your bikes. Frame-mount designs can secure step-through frames and won't interfere with fenders, while wheel-strap designs need straps that fit under the fender. If hooks don't reach low enough on a low step-through, use a frame adapter or choose a rack that clamps to the seat post. Load and test-fit both bikes before your trip.
Filters
