RV Power Inlets - Twist Lock Connector

Hey Peter, what hanger dimensions do you need? What height from the mounting surface does the bolt hole need to be? With that I can see if we have a thicker gauge steel hanger option.

Hey David, thanks for reaching out! The closest combination we can get for you is the SmartPlug RV/Marine Data Port Inlet #SM36MJ and then getting the Keystone Single Jack Ethernet Connector #SM38MJ along with the ethernet adapter for your Starlink…

Hey Kevin, thanks for reaching out! At this point in time SmartPlug hasn't made a special connection for the Starlink internet system, but they do have their SmartPlug RV/Marine Data Port Inlet #SM36MJ. From my understanding Starlink has an…

Hey Jesse! If it's just the LED light strip that's peeling off, then I recommend picking up some strong adhesive double-sided take and securing it back in place with that, but if you're talking about the "bar" that the light…

Hello Jorge, thanks for reaching out. The Shocker Hitch Air Ball Mount #SHK46VR weighs about 47 lbs. Leave a reply below with any other questions or comments and I am happy to get back to you.

Hey Clint, I attached a diagram that has all of the dimensions of the front of the Smartplug part #SM36MJ but the dimension you asked for is 1-3/4 inches.

Hi Aaron, The mounting holes are 2.44 inches (2-7/16 inches) both across and vertically for the SmartPlug RV/Marine Data Port Inlets. This is available in three different colors: - White: SmartPlug RV/Marine Data Port Inlet #SM66MJ - Black: SmartPlug…

Yes, the dimensions of the 30 Amp SmartPlug RV Power Inlet and Connector, found in Gray #SM87FR or White #SM77FR is as follows: Receptacle - 3.25" wide x 4.5" tall x 3.75" long (or deep) Plug - 3" wide x 3" tall x 4"…

Hey Troy, the Loadstar ST235/75R15 Radial Off-Road Tire w/ 15" Aluminum Wheel #KE92JR is designed to fit standard length studs on trailer hubs. You wouldn't need a special hub to use these.

Hey Larry, the Smartplug part #SM96MJ is the correct part you are looking for as this has ability to have an ethernet connection for your Starlink and a coax for the cable connection. For the ethernet connector you would need the part #SM38MJ and…

Hey William, yes the Gen-Y Torsion 2-Ball Mount #325-GH-1125 that you referenced would work great in the 2.5 inch hitch of your 2024 Ford F-350 that is towing your 30 foot Airstream Globetrotter. This will do a great job providing a bit of cushioning…

The Dometic RV Water Heater part #DMC74FR will work great as a replacement for an Atwood GC6AA-9E. They are both gas and electric with a six gallon tank. It will allow you to reuse the existing door already on the trailer. The swap should be pretty…

Hey Peter, what hanger dimensions do you need? What height from the mounting surface does the bolt hole need to be? With that I can see if we have a thicker gauge steel hanger option.

Hey David, thanks for reaching out! The closest combination we can get for you is the SmartPlug RV/Marine Data Port Inlet #SM36MJ and then getting the Keystone Single Jack Ethernet Connector #SM38MJ along with the ethernet adapter for your Starlink…

Hey Kevin, thanks for reaching out! At this point in time SmartPlug hasn't made a special connection for the Starlink internet system, but they do have their SmartPlug RV/Marine Data Port Inlet #SM36MJ. From my understanding Starlink has an…

Hey Jesse! If it's just the LED light strip that's peeling off, then I recommend picking up some strong adhesive double-sided take and securing it back in place with that, but if you're talking about the "bar" that the light…

Hello Jorge, thanks for reaching out. The Shocker Hitch Air Ball Mount #SHK46VR weighs about 47 lbs. Leave a reply below with any other questions or comments and I am happy to get back to you.

Hey Clint, I attached a diagram that has all of the dimensions of the front of the Smartplug part #SM36MJ but the dimension you asked for is 1-3/4 inches.

Hi Aaron, The mounting holes are 2.44 inches (2-7/16 inches) both across and vertically for the SmartPlug RV/Marine Data Port Inlets. This is available in three different colors: - White: SmartPlug RV/Marine Data Port Inlet #SM66MJ - Black: SmartPlug…

Yes, the dimensions of the 30 Amp SmartPlug RV Power Inlet and Connector, found in Gray #SM87FR or White #SM77FR is as follows: Receptacle - 3.25" wide x 4.5" tall x 3.75" long (or deep) Plug - 3" wide x 3" tall x 4"…

Hey Troy, the Loadstar ST235/75R15 Radial Off-Road Tire w/ 15" Aluminum Wheel #KE92JR is designed to fit standard length studs on trailer hubs. You wouldn't need a special hub to use these.

Hey Larry, the Smartplug part #SM96MJ is the correct part you are looking for as this has ability to have an ethernet connection for your Starlink and a coax for the cable connection. For the ethernet connector you would need the part #SM38MJ and…

Hey William, yes the Gen-Y Torsion 2-Ball Mount #325-GH-1125 that you referenced would work great in the 2.5 inch hitch of your 2024 Ford F-350 that is towing your 30 foot Airstream Globetrotter. This will do a great job providing a bit of cushioning…

The Dometic RV Water Heater part #DMC74FR will work great as a replacement for an Atwood GC6AA-9E. They are both gas and electric with a six gallon tank. It will allow you to reuse the existing door already on the trailer. The swap should be pretty…