Mounting Hole Spacing of SmartPlug RV/Marine Data Port Inlet

Question

Question:

What is the hole spacing for the mounting screws. I have a furrion tv port installed on my trailer and I want to see if I can swap it out for this instead. The one on the trailer looks like one of these. FTVINBPS Thanks in advance, Aaron

asked by: Aaron L

0

Expert Reply:

Hi Aaron,

The mounting holes are 2.44 inches (2-7/16 inches) both across and vertically for the SmartPlug RV/Marine Data Port Inlets. This is available in three different colors:

- White: SmartPlug RV/Marine Data Port Inlet # SM66MJ

- Black: SmartPlug RV/Marine Data Port Inlet # SM96MJ

- Gray: SmartPlug RV/Marine Data Port Inlet # SM46MJ

expert reply by: Kyle S

0

Gwendolyn Y.

1/19/2026

Hey Aaron, did the SmartPlug data port line up with the holes from your Furrion TV port? Knowing how that swap turned out could help others looking to make the same change on their trailers.

Answer 1

Hey Kevin, thanks for reaching out! At this point in time SmartPlug hasn't made a special connection for the Starlink internet system, but they do have their SmartPlug RV/Marine Data Port Inlet #SM36MJ. From my understanding Starlink has an…

view full answer...

Answer 2

Hey David, thanks for reaching out! The closest combination we can get for you is the SmartPlug RV/Marine Data Port Inlet #SM36MJ and then getting the Keystone Single Jack Ethernet Connector #SM38MJ along with the ethernet adapter for your Starlink…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

Hey Ronnie! You want the upgraded equalizer to match the existing equalizer measurements so you don't throw off the suspension geometry. The Road Armor #LC53CK is only 6" long making it is a little too short for your setup. The MORryde Shock…

view full answer...

Answer 7

Hey David, congrats on the new truck! I've got another option but the DeeZee item #DZ36GJ isn't going to work with a spray-in bed liner. The textured surface of the spray-ins causes the mat to slide around and moisture, along with debris gets…

view full answer...

Answer 8

No, there is not Gary but congrats on the new truck! All of the baseplates for the 2026 Chevrolet Silverado 1500 replace the factory tow hooks and none of the manufacturers make a removable arm that can be used in replace of the tow hooks. The Blue…

view full answer...

Answer 9

Hi Bernie! From everything I could find about your 2025 Chevy Silverado 1500 Custom, the mirrors are the same as the higher trim models (see attached image). The Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side #LO54FR will fit…

view full answer...

Answer 10

Hi Jeff! The mirrors I recommend for your 2022 Chevy Silverado 1500 ZR2 are actually the ones you were looking at, the Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side #LO54FR. Longview makes some of the best towing mirrors on the…

view full answer...

Answer 11

Hello again, Randall, thanks for reaching out. I looked everywhere and I also was not able to find the exact T-slot size listed anywhere. I do know the bars use standard T-slots, so any accessory that is also made for standard T-tracks should work…

view full answer...

Answer 12

Hey Marcus! That's unfortunate, but yes, that is exactly where #e44QV makes sense. It replaces the drop leg inner tube on the etrailer Manual Sidewind Trailer Jacks like #e35YV, #e86AV, and #e38AV and adds the SnapPad setup at the same time. That…

view full answer...

Mounting Hole Spacing of SmartPlug RV/Marine Data Port Inlet

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching