bing tracking image

RV Covers - 20 Feet Long

Filter by Type of Cover

Filters
1





















What our customers are saying:
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD


RV Covers for 20 Feet Long Trailers

Get a solid fit by choosing a 20 feet long cover matched to your trailer's body length. Measure from the front to the rear bumper, accounting for spare tire carriers and ladders, to avoid an oversized cover that can catch wind. For easier installs and better wear, unroll on the ground, tighten evenly, and pad gutter spouts or sharp corners before securing.
Yes—unroll it on the ground first to confirm orientation, then pull it over the RV. Tighten all straps to hold it in the wind; if bungees stretch or clamps loosen, switch to rope. Being oversized makes securing harder and can let wind get under it, so start with the correct size.
Yes, some have passenger side zipper entry doors at both the front and rear. Match the zipper panel locations to your door placement so you can get in while stored. When opening panels, watch sharp corners to help prevent rips at those spots.
Measure the body length from the front to the rear bumper, accounting for spare tire carriers and ladders, and don't include the hitch. Then match your result to the length ranges like 18' - 20' or 20' - 22'. Picking too large can be hard to cinch and may catch wind, while the right range helps it fit and secure better.
It can, but check for tight spots at gutter outlets and roof accessories. Gutter ends may make the corners very tight; padding with tennis balls or cardboard helps, and zip ties can keep gutter covers in place. Removing tall add-on vent covers during install lowered the profile for an easier fit.