ADCO RV Covers - 290-52271

Throw this storage cover over your toy hauler to protect it from rain and snow while you're storing it in between camping trips. Cover wraps around the bottom corners and secures with integrated straps so it won't flap in the wind.

Features:

• Cover shields your toy hauler travel trailer from rain and snow during short-term storage
  • Lessens the need for frequent washing, waxing, and roof treatments
  • Extends the life of your trailer and helps maintain resale value
• Weather-resistant, 3-ply SFS AquaShed top panel eliminates the interior buildup of mold and mildew
  • Blocks mild sunlight that can cause cracking and fading
  • Beads water on contact to prevent pooling and freezing
• Triple-ply polypropylene side panels prevent your trailer from getting dirty, stained, and scratched
  • Gray sidewall design provides your trailer with a contemporary look
• Reinforced elastic hem stretches over the corners of your trailer for a snug look
• Integrated straps and ropes prevent it from flapping in the wind and damaging your trailer
  • Weighted straps buckle underneath your trailer to secure the cover
  • Cinch ropes at the front and rear of the cover remove any excess slack
• Zippered panels on the rear and passenger's side give you easy access to the inside of your trailer
• Built-in, breathable vents reduce the interior buildup of mold and mildew
• Ladder cap and rain gutter covers help keep the cover from tearing at those sharp points
• Included storage bag let you stash the cover away at the start of the camping season

Specs:

• Application: toy hauler travel trailers that are up to 20' long
• Overall dimensions: 20' 6" long x 8' 10" wide x 10' tall
• 2-Year warranty

You're worried about your toy hauler travel trailer getting wet and dirty in storage before your next trip. Whether you're storing your trailer in the rainy northwest, snowy north, or humid south, this weather-resistant cover is designed for use in extremely wet climates so your trailer will be protected. When you keep your trailer covered, you are less likely to need to wash and wax it in between trips. And if you want to trade your trailer in for a newer model later down the road, this cover will help maintain that resale value.

The 3-ply SFS AquaShed top panel reduces moisture buildup that can damage your trailer over time. It also beads water when it rains to stop it from pooling or freezing, which eliminate the black streaks and corrosion you tend to see on the sides and roof of your trailer. And when the rain stops, the fabric dries quickly to minimize the development of mold and mildew. The top panel blocks the roof of your trailer from mild sunlight as well, protecting the cover from cracking and fading.

How to Measure Your Toy Hauler Travel Trailer

To determine if this cover will work for you, measure the overall length of your trailer from the very front to the rear bumper, making sure you're accounting for any spare tire carriers and ladders on the back. The cover isn't meant to fit over the tongue of your trailer, so don't include it in your measurements. Then measure the overall height from the bottom of your trailer to the top. Do not include any AC units, vents, or antennas in your height measurement, as the cover is already designed to accommodate them.

Securing the Cover onto Your Toy Hauler Travel Trailer

The included ladder cap and rain gutter covers help prevent the cover from splitting on those areas of the trailer, so install those first. Then unroll the cover and carefully spread it evenly around your trailer, making sure you don't pull too hard and tear the fabric. The cover is labeled with "front" and "rear" to help you position the cover correctly on your RV.

Once the cover is in place, wrap the elasticized hem on the cover around the bottom corners of your trailer and pull on the cinch ropes on the front and rear until the cover fits snugly around the contours of your trailer. These remove any excess slack in the material, especially if your trailer is slightly shorter in length. Then toss the weighted straps underneath your trailer to the other side and buckle them together, which keep the cover secure on your trailer and prevents it from flapping in the wind and damaging the paint job.

And if you still need to winterize or if you need to access one of the cargo compartments, you can use the zippered panels on the passenger's side to easily access the interior of your trailer without having to completely remove the cover. You can also unzip the entire panel on the back so you can load and unload gear into your trailer.

52271 Adco SFS AquaShed Toy Hauler Cover - Grey