RV Camera System - Wide View, Rear View Safety

*Updated From Below Hi Michael; I'm sure you're right, it is probably prepped for the Furrion. Since Furrion is phasing out the old Vision S, and parts won't be available soon, you want to get the new Furrion Vision S+ Wireless RV Backup…

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

Hey Michael. The backup camera that comes with the Furrion Vision S+ System item #FR57AD has built in mounting holes in the casing. It comes with four #6 x 3/4" flat head self-tapping screws, four #4 x 1/4" self-tapping screws, sealant, and…

Hey Thomas, for just a single rear camera Furrion Vision S+ kit you'd want the part #FR57AD. Are you wanting an additional rear camera to use with this or the one with the red light built into it by chance? We don't have either of those right…

Hey Liz. The cameras of the Furrion Vision S+ item #FR64AD will need to be wired directly to a constant 12v power source, like your Grand Design's batteries, to use them in the security mode. With the infrared lights on each camera will pull less…

Hey Mike, your 2025 Chevy Silverado 2500HD will have the power issue with the Furrion Vision S + #FR57AD that you have so you would need a solution like the part #VGR64VR that you referenced. Or if you don't want to mess with any wiring you could…

Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…

Hi Martyn, For your 2020 Keystone Cougar 27SGS Half Ton with the 3 step MORryde step unit, the correct option you’ll want is the MORryde Safe T Rail Telescoping Handrail part #MR54BR. This model is designed to mount to the flat fiberglass exterior…

Hey John! With four steps the MORryde Safe-T-Rail Telescoping RV Hand Rail #MR54BR is likely the better choice over the short #MR54RV. I went ahead and attached the full dimensions of both below so you can see what you think will fit best on your…

Hey Robert, I would check to see if something happened to the antenna on the camera if this is a new problem. It's possible it's not pointing up anymore and fixing that will get you back the reception you once had. Let me know if that helps…

Hello Ken, thanks for reaching out. Sadly, the Furrion Vision S camera system is being discontinued and replaced with the Vision S+. The camera for the Vision S+ is not backwards compatible with the Vision S system, so sadly if your camera is bad,…

Hey Mike, it is important that you use the included power cable with the Furrion Vision S+ Wireless RV Backup System w/ 1 Camera #FR57AD like the instructions indicate. If this is like a hardwire install I would look for a cigarette lighter to 2-wire…