Ready to upgrade or replace an aging unit, Advent Air pairs a complete ac system with a single-zone thermostat and distribution box so you can swap everything at once. When moving from older R410A setups, these R32 systems need the thermostat and air distribution box changed, making a full system the straightforward path.
It can with a soft start. We've seen a system start and run on High Cool off a 2000 Watt Generator during a trial run. Use the included soft start if equipped, and verify your generator's output and condition. Start the AC alone first, then add other loads. If the compressor hesitates, let it cycle and check thermostat sensor placement and duct restrictions.
Match capacity to rig size, climate, and airflow. 15,000 Btu helps cool larger coaches or hotter conditions. 13,500 Btu can work for smaller spaces, but mid-day sun can make it struggle. If your bedroom or a small room gets loud or has poor distribution, check that the cold air isn't discharging into a close wall and consider higher capacity for headroom.
Installation is generally straightforward with clear instructions. Avoid cutting plugs; replace the distribution box to make wiring clean. Thermostat wiring and furnace integration can take extra time—double-check connections. Lap seal under the gasket for added seal, and re-torque the unit after the initial torque. If mounting bolts feel short, reuse existing hardware if it fits correctly.
Yes, plan on a full swap to the Advent Air system. Mixing brands isn't recommended, and it isn't just plug and play. Replace the air distribution box and thermostat with the system's components. When upgrading older R410A setups to R32, complete system replacement is needed. You typically won't need to run new wiring, but verify your existing wiring path and zone setup.
13500 Btu
15500 Btu
RV Air Conditioners Parts or Accessories
Filters
