Recommended Tow Wiring for a 2023 Kia Telluride With LED Lights

Question

Question:

Does this tow wiring harness work for plug and play to a 2023 Kia telluride WITH the LED lighting?

asked by: Telly B

0

Expert Reply:

No, the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK74CR will unfortunately not work with your 2023 Kia Telluride with LED lights.

Your best bet would be to use a universal wiring harness # C59236 which will work with LED lights.

expert reply by: Bryce D

0

Answer 1

Hi Staci, The tow mode just affects how the drivetrain operates and disables rear proximity sensors since you'll be pulling a trailer behind you. For the wiring you'll need the Tekonsha OEM Vehicle Wiring Harness w Brake Controller Adapter…

view full answer...

Answer 2

While I don't know exactly what landing gear you have on your 2011 Keystone Raptor 3812 Toy Hauler, I can say that you should be able to replace them with the Landing Gear Set w/ Handle #RVLG-8HDL as this landing gear uses the standard weld mount…

view full answer...

Answer 3

Aside from the weight capacity of the jacks and their speed, they also have different mounting bracket locations. If you don't mind potentially having someone do some cutting and welding on your trailer then either one will work great for you. If…

view full answer...

Answer 4

Most likely you need to go with the Reese Landing Gear Set #RP500708 because it has the typical inside to inside and outside to outside spacing of 15-1/2" and 17-1/2" respectively. This is the most common weld stop measurements which is why…

view full answer...

Answer 5

Hey David! We have exactly what you need for your 2024 Kia Telluride. I have listed the parts below: Class III Trailer Hitch - Curt item #C13420 Custom Fit 4-Way Wiring Harness - Curt item #C93FV - without LEDs or Curt item #C29ZV if your Telluride…

view full answer...

Answer 6

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 7

Hello Mark, thanks for reaching out. The #C29ZV is the Curt part 56501. If you are looking for the Curt 56490, our part number for that is #C93FV. This is a T-Connector for a 2023 - 2024 Kia Telluride LX or S models without LED tail lights. The…

view full answer...

Answer 8

Hi Tom; what you need is the Curt 11296. Curt actually discontinued this hitch earlier this year and we no longer have it in stock but, you may still be able to find it elsewhere. If you aren't able to find one, the only option is to take the…

view full answer...

Answer 9

I recommend the Tekonsha Prodigy P3 Trailer Brake Controller #90195 for your 2017 Coachmen Sportscoach 407FW. This will connect to the factory wiring port on the left side of the steering column with a Tekonsha Plug-In Wiring Adapter #3027-P. I have…

view full answer...

Answer 10

Because of the length of your motorhome and the interior partitions, the Curt #C51180 Echo Wireless Brake Controller wouldn't work on your Class A motorhome. You'll need to use a standard brake controller. Your motorhome has the 7-way trailer…

view full answer...

Answer 11

Two red dots on the display of the Primus part #TK90160 indicate that the controller is on but a trailer is not detected. Since you are seeing that with multiple trailers connected you most likely have corrosion or dirt built up on the brake output…

view full answer...

Answer 12

I went out to the warehouse and pulled one of the Pro Series Snap-Ring Swivel Jacks, #PSEJ10000101, to measure for you. I added dimensions to a photo I took of the mounting plate for you to use to see if the mounting pattern will match up to your…

view full answer...

Recommended Tow Wiring for a 2023 Kia Telluride With LED Lights

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching