Hey Kyle! The Pacbrake Alpha HD Air Bag Suspension Kit #PB22RV installs in the same location as most fifth wheel and gooseneck brackets. I would expect to have to do some drilling to install these with your B&W Turnoverball. Instead, I recommend…
I sure do Brian and thanks for the information! To add a spare tire mount to your Magic Tilt tandem axle boat trailer, I recommend the Tie Down Spare Tire Mount item #TD86FR. It attaches to frames and tongues up to 8" tall. The Tie Down item…
Hello Matt, Thanks for writing in, that’s a great question. I’ve definitely heard the same concerns about the factory leaf springs on these, especially on larger toy haulers like your Wolf Pack. It makes sense to want something that’s going to hold…
Hi James! With your GVWR being 7,600 pounds, your loaded tongue weight should be around 760 pounds. With that said, I recommend going with the Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 8.5K GTW, 850 lbs TW…
Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…
Hey Craig, Thanks for your question. I went down to our warehouse and measured the thickness of the backing plate on #TD86FR, and it measures right at 1/4 inch. Based on the photo you sent and the amount of clearance you have available, I do think…
Hey Chris, thanks for reaching out. The CE Smith Spare Tire Mount #CE27201 will not work with a 6-lug (6 on 5-1/2") wheel. I went and grabbed one from our warehouse and tried to fit it thru the holes on a 6-lug wheel and it would not fit.…
Hello Craig, Apologies for the delay. I was waiting to hear back from the manufacturer. I reached out to Tie Down, and they confirmed that the Tie Down Spare Tire Mount part #TD86FR, is rated to support a spare tire up to 65 lbs. This carrier is…
Hey Amanda! Yes, this trailer tongue weight scale #BW34KR includes a weather-tight hard plastic storage case. It keeps the scale protected between uses and makes it easy to store without worrying about moisture or damage to the digital components. Do…
The first thing you will need to do is locate the slide-out relay control and unplug the wiring harness from the controller. Then find the slide-out motor. On the back side of the motor there should be a brake lever. Turn it counter-clockwise to the…
Hey Dennis! The brackets on the Valterra EZ Hose Carrier #A04-0155XBK are fixed in place on the tube and aren’t designed to be repositioned. Each bracket has a fixed mounting hole spacing of 5-1/4" on center as well. What kind of trailer are you…
Hi Willy! The CE Smith Spare Tire Mount #CE22007Z-11050-2 is one of our most popular options for boat trailers. It can be mounted above the frame, on the side of the frame, or even under the frame, so it's pretty versatile. It can be a little…
Kitchen Accessories with brown adjustable drink holders
Keep drinks secure and close at hand with brown adjustable drink holders for RV and camper spaces. They mount to a wall with screws or double-sided tape, and using a 3M command strip should be fine; they also work on a flat, horizontal surface with tape. Fold them up when not needed, and fit cups and tumblers from just under 2-1/2 inches to about 4 inches, including 30 ounce styles.
Yes, it can work on a horizontal surface. It's designed for walls with screws or tape, but on a desk or table you'd use tape. Clean and dry the surface and use strong tape for best hold. If you notice movement, reposition or switch to a mounting spot that allows screws.
You can mount it with the included screws or double-sided tape, and 3M Command strips should be fine. Use a heavy-duty strip and clean the surface first. Some interior finishes don't play well with two sided tape, so consider screws if adhesion is weak. The mounting holes are down the center of the back in three locations: left, center, right.
Yes, it's made of durable plastic and folds up when not needed, which works well in small spaces. It's been used beside beds and at the ends of recliners to help prevent spills. If pillows or cushions push against it, mount slightly higher or off to the side to minimize bumps.
Yes, it fits common tumblers. It expands up to about 4 inches and is just under 2-1/2 inches at its smallest. Yeti Tumblers measure roughly 3 inches at their smallest point and about 4 inches at the widest, so they fit. Check your cup's narrowest and widest points before mounting to ensure a snug hold.
Filters
