Hitch Step - Carr

Thanks for reaching out Kathleen. The TorkLift Custom Frame-Mounted Tie Downs #TL66ZV include the complete set of front and rear tie-downs for both the driver and passenger sides of your truck. This kit is the correct fit provided your Toyota Tacoma…

I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…

Hello Morgan, Great question! The etrailer Over-The-Cab Truck Ladder Rack - Steel - 1,000 lbs #e78FV is going to be a great fit for your 2026 Ram 2500 whether it has a 6 1/2' bed (without Rambox) or an 8' bed. With the etrailer Over-The-Cab…

Hey Jeff, great question! Choose the 2,000 lb model if you tow larger travel trailers, enclosed trailers, dump trailers, equipment trailers, or other heavy-duty trailers with tongue weights that could exceed 1,000 lbs. It works for lighter trailers…

Hey Robert, yes the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855 that you referenced will fit the T slots of the BAK Revolver tonneau cover that you have. What are you planning on carrying on the…

Hey Connor! Yes, the Curt Dual Ball Attachment for Weight Distribution Shanks #C69NR will work with an Equal-i-zer shank. This fits standard WDH shanks with 2-1/2" hole spacing. The #EQ90-02-4500 has 1-1/4" spacing, so every two holes is…

Hey David! The length of the tangs on the 2-Tang Clevis Attachment #BW54KR is 5.19". The distance between the tangs is 2" and the hole diameter is 1.11".

I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like your Fedex step van are multi-fit RV hitches like the #41990 that has a 16k capacity. This is a weld on hitch that would require…

Hey Rob, I’d be wondering the same thing if I came across a ball mount made out of aluminum like the #BPH77MR while researching. Totally fair question. That said, I haven’t seen any noticeable difference in slop or wear compared to their steel…

Hey Mike! The Curt #C59496 is a universal splice-in wiring harness. The Curt T-Connector Vehicle Wiring Harness #C56403 is a custom wiring harness so it plugs into the connection points at the rear without any need for splicing. Since the custom…

Hi Eric! The Dylux RV Tankless Water Heater #DY54FR does have auto frost protection, which activates when the temperature drops below close to freezing temps. That’s a helpful feature for chilly nights while the RV is in use. I would not treat that…

Hi Raymond! I have a couple options you may be interested in, but that's quite a conundrum. I do know there are no 4 bike racks that can hold a spare tire as well as the bikes, but you may be able to use a cargo carrier, like the 24x60 etrailer…

Thanks for reaching out Kathleen. The TorkLift Custom Frame-Mounted Tie Downs #TL66ZV include the complete set of front and rear tie-downs for both the driver and passenger sides of your truck. This kit is the correct fit provided your Toyota Tacoma…

I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…

Hello Morgan, Great question! The etrailer Over-The-Cab Truck Ladder Rack - Steel - 1,000 lbs #e78FV is going to be a great fit for your 2026 Ram 2500 whether it has a 6 1/2' bed (without Rambox) or an 8' bed. With the etrailer Over-The-Cab…

Hey Jeff, great question! Choose the 2,000 lb model if you tow larger travel trailers, enclosed trailers, dump trailers, equipment trailers, or other heavy-duty trailers with tongue weights that could exceed 1,000 lbs. It works for lighter trailers…

Hey Robert, yes the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855 that you referenced will fit the T slots of the BAK Revolver tonneau cover that you have. What are you planning on carrying on the…

Hey Connor! Yes, the Curt Dual Ball Attachment for Weight Distribution Shanks #C69NR will work with an Equal-i-zer shank. This fits standard WDH shanks with 2-1/2" hole spacing. The #EQ90-02-4500 has 1-1/4" spacing, so every two holes is…

Hey David! The length of the tangs on the 2-Tang Clevis Attachment #BW54KR is 5.19". The distance between the tangs is 2" and the hole diameter is 1.11".

I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like your Fedex step van are multi-fit RV hitches like the #41990 that has a 16k capacity. This is a weld on hitch that would require…

Hey Rob, I’d be wondering the same thing if I came across a ball mount made out of aluminum like the #BPH77MR while researching. Totally fair question. That said, I haven’t seen any noticeable difference in slop or wear compared to their steel…

Hey Mike! The Curt #C59496 is a universal splice-in wiring harness. The Curt T-Connector Vehicle Wiring Harness #C56403 is a custom wiring harness so it plugs into the connection points at the rear without any need for splicing. Since the custom…

Hi Eric! The Dylux RV Tankless Water Heater #DY54FR does have auto frost protection, which activates when the temperature drops below close to freezing temps. That’s a helpful feature for chilly nights while the RV is in use. I would not treat that…

Hi Raymond! I have a couple options you may be interested in, but that's quite a conundrum. I do know there are no 4 bike racks that can hold a spare tire as well as the bikes, but you may be able to use a cargo carrier, like the 24x60 etrailer…