Save Big with Cyber Monday Deals!
Get instant access to all the cargo and equipment in your truck bed with this hitch-mounted step. Durable, non-skid, black powder-coated step platform folds down for use, up for storage. Extra-large step supports up to 500 lbs.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Adam: Hi, everyone, Adam, with etrailer.com. Today, we're going to be taking a look at the Carr Mega Step. This is going to work with your two inch hitch receivers and it will be able to fold up. So something that I noticed, one of the more difficult things about owning a truck is getting into the bed, this is quite the task. With this step, it's going to be a little bit easier on your back, your arms and your legs. You can fold it down and you can get into the bed of your truck without stepping on your bumper because our plastic here will wear away over time and we want to keep our truck looking brand new.So as you can see here, we do have a little bit of scratches and discoloration just by stepping on this rear bumper, just one or two times also, it's not really too much room there.
I'll get about a third of my foot onto the step and then I'll just be hitting our nice license plate in the back here. We don't really want to do that. Luckily we have a little bit more room here. I get more of the meat of my foot onto the step, which gives me a more sturdy pivot point to get in and out of the bed of my truck.So the Mega Step is going to be ideal for getting up and loading stuff onto your roof rack even if you have a spare tire on the back. So as you can see here, we have a pretty gritty surface and it is going to be a lot grippier than our plastic up top.
And it is going to last a lot longer as well. It is made of a sturdy steel construction with a nice powder coated finish. So it's not going to fade away like our plastics will up top. It does have a little bit of assembly required. It's just going to be these four bolts here, a washer and a lock nut to put that two inch hitch receiver on the very back end of this plate.So our step is going to have quite a bit of room just in case you're wearing larger work boots in the winter.
It is going to be about 14 inches wide by five inches long, and it is going to have a nice weight capacity of 500 pounds. So with our step folded down from very edge of our hitch to the very end, it is going to be about seven and three quarter inches out, but we can actually fold this up and that's going to bring that distance down to about two and a quarter inches. And you don't have to worry about it hitting your bumper. It doesn't have enough play to damage your nice Chrome bumper.So it does not come with an anti-rattle bolt or a pin. So if you would like to get a locking pin or whatever, you can grab that here on etrailer.com.
I would suggest getting a locking pin because this is a pretty attractive step and you don't want it to walk away. And as you can see here, this is the plate that we will have to assemble onto it. And it's going to have two different holes just so you can get the right amount of distance between your hitch and your step.Not only is this step going to be very functional and help you get in and out of the bed of your truck, when you fold it up, it's also going to look stylish as well. We have a nice symbol here. It's just going to give your truck a nice and clean look.So if you like the folding step function of our step here, Carr also makes a smaller step and is going to be able to fold down just like the one you see here. And we will have many different options on different colors and designs on this plate here. In this instance, we do have black so that's always an option. On top of that, we do have another one that's going to stick out from your hitch a little bit longer. It is going to be fixed so it won't flip up, but you do get a gritty piece of sandpaper just to give you that optimal grip when stepping on your step.So whether you're using this step on your pickup to get into the bed of your truck, or if you're using it on your SUV, just so you can get a better look at loading up your cargo carrier, whatever it may be, if you have a two inch hitch, this is definitely going to get what you need.Thanks for watching. I hope this video helps. And again, this was the Carr Mega Step and I'm Adam..
Average Customer Rating: 4.7 out of 5 stars (44 Customer Reviews)
Get instant access to all the cargo and equipment in your truck bed with this hitch-mounted step. Durable, non-skid, black powder-coated step platform folds down for use, up for storage. Extra-large step supports up to 500 lbs.Great product. Top notch service from etrailer. Thanks
It fits our 2017 Transit 150 van, with a Curt hitch from etrailer, perfectly. From the pics you will see it looks like it was designed for this vehicle. It cuts the factory distance to the step bumper in half. My old knees like it. My shins like. . .love the fold up position. Step is big enough that you can hit it stepping around a load in the van. Provides solid footing even when stepping off center. Two issues: 1) The price. A bit steep compared to price of a hitch. But if it helps save my knees it's worth it. 2) The mount is loose in the hitch receiver. Has a tendancy to wobble. Concerned about this surprising others. So I took a 7/8" id flat washer and cut it down to 2" wide with flats on oposite sides. I put it in from the front of the receiver and wedged it under the step mount. This stablized the step. And when it comes time to remove the step I'll be pulling it away from the washer, undoing the wedge.
Very well made just received it today, perfect for the transit style van just the right size. The step is at a comfortable split between the ground and the bumper. It is just what I was looking for. Thank you.
Mark G - 07/08/2020i was very impressed with how solid this folding step is and when folded it seems to blend right in
Product is great!! Etrailer is fantastic too.
This is my 2nd Mega Step. The other step is on a work vehicle for 2 years (no issues what so ever). Great product. That’s why I need one for my personal truck.
works perfect, just what my bus needed to get in and out of emergency exit
We do like this product.
Mark - 04/05/2020Very nice unit, albeit a bit pricey. Solid and well made, so I don't regret spending the money.
Great product! Works as described! Looks good, too!
Fast response everything was great
Review from a similar Mega Step in Hitch Step
Love it, great strong step.
Needed little grinding on nuts that hold main plate to tongue assembly, they are too close to hitch entry point, make assembly wider! Pin hole barely lined up due to nuts hitting hitch and after grinding nuts slightly hole was barely lined up. Chamfered leading edge of my locking pin and drove it in with hammer, will have to drive out to tow so pain if its on an off a-lot. Gives it a tight e rattle free fit tho!
Don’t expect slip on from package, needs fitting..
Review from a similar Mega Step in Hitch Step
It has worked very well. Very pleased with the product. My kids now have an easier time stepping up into the back of my land cruiser. My only "complaint" is that it doesn't fit perfectly tight in the hitch and will rotate very slightly. But, I have never had a problem with it rattling when I drive. Would definitely purchase again.
Review from a similar Mega Step in Hitch Step
Worked exactly as advertised… am very happy with it.
Review from a similar Mega Step in Hitch Step
Yes, it is expensive..but as the cliche says, "You get what you pay for". This step has performed flawlessly, including the time a 30 pound log rolled out and hit it (open) when I opened the tailgate.
Having seen and tried the cheaper alternatives (which I find small and somewhat less stable that the CARR product), I recommend it.
That said, I have two little issues with it.
1) The foot plate does not stand vertical unless the assembly screws are tightened all the way down. In doing that, moving the foot plate to horizontal then requires two hands, not a foot to push down.
2) The holes in the mounting bracket (where the retainer bolt goes through the hitch receiver) do not line up with my Draw-Tite hitch. if it was drilled about 1/2 inch shorter, the back plate of the step would be tight against the hitch receiver. Currently, it moves slightly, which is a little disconcerting when stepping down from the truck bed with a mountain bike in your hands. Also, wish it was of thicker steel.
Okay, there may be three issues, the CARR symbol looks like a Raiders football team logo, so being from Kansas City, it gets some comments.
Would I buy one again...in a heartbeat. And yes, I do have a locking hitch bolt, otherwise, I would be buying another one due to theft!
Lastly, make sure you put the step up when not is use. If you walk into with your shin, you'll only do that once.
Jerry - 07/30/2019Review from a similar Mega Step in Hitch Step
We mounted this on the front bumper of a long hooded dump truck for opening and closing hood. So far so good works as it should
Review from a similar Mega Step in Hitch Step
I received this receiver step yesterday, installed it this morning on my P.U. truck. It will let me step up & put things over the tailgate without having to get a step stool. Then I can fold the step up so I don't hit my shin when I walk past the rear of the truck. It also looks nice.
Pete B - 09/20/2018Review from a similar Mega Step in Hitch Step
I've now had this about a year. I did have to shim it up to keep it from rattling in the hitch, but overall I’m very happy with it. No issues with it folding up and down. I don’t keep it on 24/7 but I do take it with me several times a year when I go camping, it gets covered in mud and still has enough friction on the step itself to not feel slick at all and the folding mechanism seems to have held up just fine. I tend to sort of "land" on it when I'm getting out, I'm 240 lbs and it seems solid. I would buy it again.
Review from a similar Mega Step in Hitch Step
I didn't use for the intended purpose. I used it for the first step off our pool deck into the pools steps. Works great.
Review from a similar Mega Step in Hitch Step
The insert of the step into the hitch was very loose. I had to drive two small nails between the insert and hitch holder which means the step is almost permanent and would require a hammer to remove. The insert needs to be a square and shims should be provided to secure in place.
Review from a similar Mega Step in Hitch Step
This product arrived in good shape and was just as advertised.
This step is being used on a 2013 Mercedes Benz Sprinter Van with the factory hitch. Installed easy and works perfect for getting in an out of the back doors.
Review from a similar Mega Step in Hitch Step
Very solid construction and great quality. One issue is that the bar that goes into the receiver should be longer to accommodate vehicles that have the receiver deeper under the rear bumper. I have a 2011 Mercedes Benz GL-450 and at the first set of holes the step is not fully locked in the upright position, it rests against the bump cover. I can accept this but not for $135. Carr does not carry a longer bar.
Review from a similar Mega Step in Hitch Step
First of all let me say that this step is well engineered and very well built. I only have two concerns. Number one, I found the spring retainer screws were loose. Upon fighting them I found the step would not stay folded. There was no tension on the spring. The screws needed to be left somewhat loose in order for the spring to engage the step. To solve this problem so the screws would not work themselves out I installed a lock nut on each screw. The second concern was the fit into my hitch receiver. This I solved by adding some shims until the fit was satisfactory. Overall I am pleased with the looks and function of the step.
Review from a similar Mega Step in Hitch Step
The fit in the receiver is kind of sloppy so it is going to cause a rattle when driving. The countersink for the assembly bolt holes does not match the angle of the shoulder of the bolt supplied. When you tighten the mounting bolts the head distorts thus locking the allen wrench in the bolt head. This makes the allen wrench extremely difficult to remove from the bolt. Times 4 bolts. I would buy another but only if I needed the ability to fold up so my truck will fit in a garage, or to keep my wife from running into the step.
Do you have a question about this Hitch Step?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.