Videos
for Emergency Vehicle Lights
Help Articles
for Emergency Vehicle Lights
Expert Answers
for Emergency Vehicle Lights
I have added a photo detailing the wiring connections for the Pollack Heavy-Duty, 7-Pole, Round Pin conncetor, #PK11700, see link. This is a SAE J560 compliant connector. The wiring diagram for the vehicle side connector, #PK11720, is pictured…
view full answer...The Hollywood Racks Safety LED Light Bar for Bike Racks #HLY54RR will work with any bike rack that has 1-1/4" square tubing. It was designed around the Hollywood Racks brand of bike racks but is definitely a universal option that will fit a…
view full answer...Yes, the Timken Bearing Kit #TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since that's about the…
view full answer...You're correct. The repalcement for your existing B12EA-22 brake would be #AKEBRK-7R-SA for the right side and #AKEBRK-7L-SA for the left.
view full answer...We do have a wiring diagram for you! Whether you have the 1,000 psi Dexter DX Series #K71-650 or the 1,600 psi Dexter DX Series #K71-651 the wiring will be the exact same. I have attached a wiring diagram and review videos for you to check out.…
view full answer...For your 2020 GMC Sierra 2500 HD, the Optronics Load Resister #ALEDRST2B will solve the issue. However, it is important to note that the #ALEDRST2B comes with a plug-in on the end. If you need the harness that allows you to hardwire it with your…
view full answer...The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…
view full answer...Yes, since the Low Profile LED Flood Light #OPT64FR puts out 1,000 lumens it would easily light up a door/ramp like you mentioned.
view full answer...It sounds like you're needing a light like the Great White LED Trailer Back Up Light #PE44AR. This has a 7" diameter and a simple 2-wire connection. Since it's a surface mount light you only need to make a small hole for the wiring…
view full answer...I would recommend using shims to move the slide out awning #LCV000251461 out far enough that it wouldn't interfere and you could install it where it needs to go.
view full answer...The Demco Battery Disconnect Switch #DM63FR has the following ratings: - 300 Continuous Amps Rate - 500 Cold Cranking Amps I confirmed this with my contact at Demco.
view full answer...We do have some magnetic lights that operate on batteries. They're technically emergency lights but they have a constant shine setting. Of course they will not operate as brake or turn signals which I cannot recommend you tow your trailer…
view full answer...