Emergency Vehicle Lights - Suction Cup Mount

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

Between the Curt #C60692 and B&W #BWGNXA2061 that will fit your 2022 GMC Sierra 3500 with the factory pucks/prep package, I do prefer the B&W. Though both the Curt and B&W are rated up to 30,000 pounds and will fit your truck perfectly,…

Most often the root cause for issues with trailer lighting is a weak ground. Strange as it may sound, a loose or rusty/corroded ground can cause a vehicle's trailer wiring harness to badly misbehave and shut down some functions. It may also just…

The problem is either the power or the ground side of the wiring of the LED assemblies. First thing to do is check that 12 volts are making it to the trailer connector. You can use a circuit tester like our part #3808. Next, trace the wiring back to…

...surface to which you can mount any magnetic light. We do not have any suction cup style adapters but these adhesive pads will do the trick. The pads measure 3-1/2 inches wide, 3-1/2 inches tall, and 4...

Hey Beth, yes the Dometic FreshJet 3 part #DMC69ZR can replace your Dometic Duo Therm and would do a great job.

...magnetic and suction cup....mounting to a fiber glass roof used on a Hurst for funeral services would it stay affixed...

I can help but unfortunately, I can't really give you an exact psi to tow your 3,500 lb - 4,000 lb trailer as there are just too many factors that go into selecting the correct air pressure. The most important of which however is ride height.…

There are indeed many different replacement step controllers out there and I am happy to re-confirm that the correct current item to replace your Kwikee step controller 1800709 is part #LC363989. I verified this item with my parts contacts at…

You'd want the tang washer like the #5-101 that you referenced between the washer and the nut.

With a factory trailer harness all of the wires you are looking for are at the back of that plug. To keep from splicing into the wiring harness there or tying up the plug itself you can use a T-Connector to duplicate the signals. The best way to…

Hey Dave, thanks for reaching out! The best option for you is the XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches #SHP2040-XL which can work both with 2" and 2-1/2" hitch receivers, but it does require that your…