Filter by Style of Cooler

$155.99 - $212.94

$50.21 - $80.52

$33.00 - $161.99

$215.88 - $499.99

$69.99 - $1,650.47

$24.27 - $251.77

$194.80 - $369.98
Videos
for Coolers
Help Articles
for Coolers
Expert Answers
for Coolers
Hey David, welcome back! I'm assuming you still have ST215/75R14 tires on your 2024 Coleman 17B. We have one option available in black right now which is the Taskmaster Provider ST215/75R14 Radial Tire with Black Machined County Line Wheel…
view full answer...Thanks for reaching out, Nick! I'm not 100% sure what your bolt pattern is so I'll include a few different options. Some of the numbers you gave are OEM number so based off that I THINK your bolt pattern is a 5 on 4-1/2. You will want to…
view full answer...Hello Anthony. It sure does! The CVT Timber Creek Annex for Car Camping #RG35ZV will work on virtually any SUV or crossover, so it can absolutely be used on a 2024 Subaru Crosstrek.
view full answer...Hi Randal! As the etrailer Hard Tonneau Cover - Folding - Fiberglass Reinforced Plastic #e98RV for your 2024 Toyota Tundra 6-1/2 Foot Bed with the Deck Rail System has weather seals on top of the bed rails, you will not need drain tubes. From what I…
view full answer...Hey Chris, the good news is yes, the Roadmaster Direct-Connect Base Plate Kit #RM-524431-5 that you have for your 2020 Ford F-150 Raptor will also work for your 2025 Ford F-150 Raptor. As of right now it does not look like we have an install kit for…
view full answer...Hey Janet! The 70" measurement is the overall width of the Thomas Payne Trifold RV Loveseat and Sleeper #LC34FC. The overall dimensions are 70" x 37" x 37". The sleeping surface is 60" wide x 70" long x 19" high.
view full answer...The awning roller that is installed on the Solera 12V Power RV Awning Conversion Kit #LC434724 that you referenced could be wound not tight enough and the motor doesn't have enough spring assist. Or it's possible the battery of your RV is…
view full answer...The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…
view full answer...We offer 3/8-inch diameter Replacement Snapper Pin #JFC-PN whose measurements are noted in the photo I linked for you. This item matches the original; I confirmed by going to our warehouse and measuring the pin included with your Husky Super Brute…
view full answer...My contact at Curt Manufacturing advised that they do not offer the replacement Wire Lock Lynch Pins (shown as part number 10 in their instructions, which are linked) that secure their TruTrack's trunnion bars at the head end but he said…
view full answer...I went out to the warehouse and pulled Pins and Thumb Clips #EQ95-01-9415 to measure them for you. The diameter is 3/8 of an inch. The usable length is just under 2-1/2 inches (2.45 inches). And the opening is 2.46 inches by 1.5 inches.
view full answer...My contact at Atwood recommended using a pin at least 3/8 in diameter and 2-3/4 inches long. I'd recommend using a snapper pin, part #JFC-PN which has those dimensions.
view full answer...Videos
for Coolers
Help Articles
for Coolers
Expert Answers
for Coolers
Hey David, welcome back! I'm assuming you still have ST215/75R14 tires on your 2024 Coleman 17B. We have one option available in black right now which is the Taskmaster Provider ST215/75R14 Radial Tire with Black Machined County Line Wheel…
view full answer...Thanks for reaching out, Nick! I'm not 100% sure what your bolt pattern is so I'll include a few different options. Some of the numbers you gave are OEM number so based off that I THINK your bolt pattern is a 5 on 4-1/2. You will want to…
view full answer...Hello Anthony. It sure does! The CVT Timber Creek Annex for Car Camping #RG35ZV will work on virtually any SUV or crossover, so it can absolutely be used on a 2024 Subaru Crosstrek.
view full answer...Hi Randal! As the etrailer Hard Tonneau Cover - Folding - Fiberglass Reinforced Plastic #e98RV for your 2024 Toyota Tundra 6-1/2 Foot Bed with the Deck Rail System has weather seals on top of the bed rails, you will not need drain tubes. From what I…
view full answer...Hey Chris, the good news is yes, the Roadmaster Direct-Connect Base Plate Kit #RM-524431-5 that you have for your 2020 Ford F-150 Raptor will also work for your 2025 Ford F-150 Raptor. As of right now it does not look like we have an install kit for…
view full answer...Hey Janet! The 70" measurement is the overall width of the Thomas Payne Trifold RV Loveseat and Sleeper #LC34FC. The overall dimensions are 70" x 37" x 37". The sleeping surface is 60" wide x 70" long x 19" high.
view full answer...The awning roller that is installed on the Solera 12V Power RV Awning Conversion Kit #LC434724 that you referenced could be wound not tight enough and the motor doesn't have enough spring assist. Or it's possible the battery of your RV is…
view full answer...The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…
view full answer...We offer 3/8-inch diameter Replacement Snapper Pin #JFC-PN whose measurements are noted in the photo I linked for you. This item matches the original; I confirmed by going to our warehouse and measuring the pin included with your Husky Super Brute…
view full answer...My contact at Curt Manufacturing advised that they do not offer the replacement Wire Lock Lynch Pins (shown as part number 10 in their instructions, which are linked) that secure their TruTrack's trunnion bars at the head end but he said…
view full answer...I went out to the warehouse and pulled Pins and Thumb Clips #EQ95-01-9415 to measure them for you. The diameter is 3/8 of an inch. The usable length is just under 2-1/2 inches (2.45 inches). And the opening is 2.46 inches by 1.5 inches.
view full answer...My contact at Atwood recommended using a pin at least 3/8 in diameter and 2-3/4 inches long. I'd recommend using a snapper pin, part #JFC-PN which has those dimensions.
view full answer...Filters
- 52 results
Filter Results
Backpack Cooler
$155.99 - $212.94
Bike Rack Cooler
$50.21 - $80.52
Can Cooler
$33.00 - $161.99
Chest Cooler
$215.88 - $499.99
Electric Cooler
$69.99 - $1,650.47
Travel Cooler
$24.27 - $251.77
Water Dispenser
$194.80 - $369.98