Hello Anthony. It sure does! The CVT Timber Creek Annex for Car Camping #RG35ZV will work on virtually any SUV or crossover, so it can absolutely be used on a 2024 Subaru Crosstrek.
Hi Randal! As the etrailer Hard Tonneau Cover - Folding - Fiberglass Reinforced Plastic #e98RV for your 2024 Toyota Tundra 6-1/2 Foot Bed with the Deck Rail System has weather seals on top of the bed rails, you will not need drain tubes. From what I…
For your Geo Pro Camper with a 59" frame rails width the DrawTite Multi-Fit Motor Home Trailer Hitch part #82201 is an excellent choice. I like the really low profile it offers allowing it to fit snugly up under the camper. It mounts with the…
You would definitely want to go with the higher tongue weight range Strait Line system part #RP66084. The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow.…
To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind…
To use the Pro Series RB3 on two trailers would only require you to get a second set of spring hangers. For that you would want the part #RP6637 and for the chains part #55630.
I attached a picture I got from Pace that covers exactly what the maintenance looks like for the Pace Switchblade tonneau covers like part #311-SWFA06A29 that you asked about.
I have seen several people use the Mounting Bracket #HM40978 to relocate the 7- and 4-Pole Trailer Connector Socket #HM40975 on their 2019 Toyota 4Runner to a more easily accessible location. I have linked a image below showing where they remounted…
I can definitely help and get you set up. If your truck does not have any factory trailer wiring we will basically have to do this from the ground up. First you will install a 4 pin connector part #C58044. This will simply splice in using the…
Hey Bruce, we have the Draw Tite hitch part #DT27YR that fits your 2025 Hyundai Ioniq 5 which I attached a picture from the install instructions that covers where to trim. Since the back of the vehicle is all covered up there's no real way to…
We currently offer three options for a 2024 Nissan Frontier; the etrailer #e98869, Draw-Tite #75282, and Curt #13241. Of the three the Curt and etrailer hitch options only real difference is just the finish with the etrailer having a matte black…
Filters
