Products Featured in this Video
Today, we're going to be taking a look at the Titan 2-tang clevis with 2 position adjustable channel bracket. Now, this clevis is designed to couple with a lunette ring. Clevis pin is sold separately. The platform hole can also be used as a ball mount for a standard towing. Now, the channel bracket design allows you to adjust the height of the clevis to match different tow vehicles. This particular bracket is going to feature 4 adjustment holes on the side here, so that's going to offer 2 positions when it comes to mounting because the unit uses 3 of the holes for mounting.
You're going to have position 1 and then position 2. Overall, it's a really nice design. We're looking at a steel construction with a raw finish. The bracket is going to weld onto the trailer, and then you can simply bolt the clevis to the bracket with the included hardware. This fits directly inside here, and then you can adjust it between those 2 positions depending on your application. Now, the clevis pin hole diameters are going to measure 1 inch.
The tang separation, edge-to-edge, that's going to be about 2 1/2 inches. The unit is going to feature a weight capacity of 20,000 pounds. The channel bracket is going to give us a height measurement of about 7 and a half inches. It's going to give us a width measurement, outer edge to outer edge, you're pretty close to 3 1/2. Internal measurement is going to be a little bit closer to 3 inches.
Mount hole diameter is 5/8 of an inch, and then those holes are separated on center apart from one another by 2 inches. That's going to do it for today's look at the Titan 2-tang clevis with 2 position adjustable channel bracket.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Partsmore
4/12/2019
What is the measurement between the two tangs or between the plates for hitch pin?