Hey James, thanks for reaching out. For the Benton LittleShift Bike Rack #B54VR the pin should be inserted until the "shoulder" of the bolt is flush up against the side of the hitch. I've included a few pictures to help illustrate. If…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
Hi Richard! Yes, the Curt Trailer Hitch Receiver #C37RV will fit your 2026 Santa Fe Hybrid. The installation process will be the same. We actually installed this on a 2025 hybrid so you can use that as a guide. I attached a link to the video further…
Hey Guy, thanks for the information and welcome back! The best e-bike rated bike rack that is rated for use behind a motorhome is the Hollywood Racks Sport Rider SE item #HLY87RR. This is our only trike capable bike rack. It's rated to be used…
Hey Jim, the Benton Littleshit part #B54VR that you referenced weighs 25 lbs. It is in the description but it's easy to miss so no worries! This will work great with a bike bunk part #CC-275. What kind of bike do you have?
Hi Edward, no problem at all! If you're looking at the Lets Go Aero Jack-It PLUS Bike Rack for 2 Bikes part #LGA47ZR, it does require removing the A-frame jack during installation. If your trailer has a bolt on jack, it's a pretty…
Brian, you’ll each want the version that matches your RV’s service. The #HU84ZR is built for 30A rigs like your friend’s Cougar, while the #HU74ZR is made for 50A rigs like your Cedar Creek. They both do the same job - voltage boosting, surge…
Good thinking, Andy - good name btw. The Watchdog Surge Protector / Voltage Booster 50A #HU74ZR is a hefty unit, but it does sit outside at the pedestal, so security matters. It has a metal loop built in for a padlock or cable lock, which you can run…
Hey Don, welcome back! The answer to your question entirely depends on which Jack-It bike rack you have. If your is the Lets Go Aero Jack-It PLUS item #LGA47ZR or Jack-It Pro 2 item #LGA55VR, then the answer is yes. From the top of the mounting plate…
Hey Bruce, I would go with Grade 8 bolts to install the Demco Straight Tongue Coupler part #DM15000-52. Stainless would be a great choice too but that's not an absolute requirement.
The Thule EasyFold XT #TH903202 you mention is not rated for trailers, motorhomes, or RVs. There was a time when there was some confusion around this question, but this has been cleared up. Due to our stock, and your heavy bikes, your options are…
Hi Susan; does that trike fold up so it can fit a standard bike rack? The way mentioned how it folds makes me believe it might be able to. If that is the case, you can use the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes #HLY64FR. This has…
Hey James, thanks for reaching out. For the Benton LittleShift Bike Rack #B54VR the pin should be inserted until the "shoulder" of the bolt is flush up against the side of the hitch. I've included a few pictures to help illustrate. If…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
Hi Richard! Yes, the Curt Trailer Hitch Receiver #C37RV will fit your 2026 Santa Fe Hybrid. The installation process will be the same. We actually installed this on a 2025 hybrid so you can use that as a guide. I attached a link to the video further…
Hey Guy, thanks for the information and welcome back! The best e-bike rated bike rack that is rated for use behind a motorhome is the Hollywood Racks Sport Rider SE item #HLY87RR. This is our only trike capable bike rack. It's rated to be used…
Hey Jim, the Benton Littleshit part #B54VR that you referenced weighs 25 lbs. It is in the description but it's easy to miss so no worries! This will work great with a bike bunk part #CC-275. What kind of bike do you have?
Hi Edward, no problem at all! If you're looking at the Lets Go Aero Jack-It PLUS Bike Rack for 2 Bikes part #LGA47ZR, it does require removing the A-frame jack during installation. If your trailer has a bolt on jack, it's a pretty…
Brian, you’ll each want the version that matches your RV’s service. The #HU84ZR is built for 30A rigs like your friend’s Cougar, while the #HU74ZR is made for 50A rigs like your Cedar Creek. They both do the same job - voltage boosting, surge…
Good thinking, Andy - good name btw. The Watchdog Surge Protector / Voltage Booster 50A #HU74ZR is a hefty unit, but it does sit outside at the pedestal, so security matters. It has a metal loop built in for a padlock or cable lock, which you can run…
Hey Don, welcome back! The answer to your question entirely depends on which Jack-It bike rack you have. If your is the Lets Go Aero Jack-It PLUS item #LGA47ZR or Jack-It Pro 2 item #LGA55VR, then the answer is yes. From the top of the mounting plate…
Hey Bruce, I would go with Grade 8 bolts to install the Demco Straight Tongue Coupler part #DM15000-52. Stainless would be a great choice too but that's not an absolute requirement.
The Thule EasyFold XT #TH903202 you mention is not rated for trailers, motorhomes, or RVs. There was a time when there was some confusion around this question, but this has been cleared up. Due to our stock, and your heavy bikes, your options are…
Hi Susan; does that trike fold up so it can fit a standard bike rack? The way mentioned how it folds makes me believe it might be able to. If that is the case, you can use the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes #HLY64FR. This has…
Bike locks are essential for keeping your bike safe from theft, whether you're on a road trip or just grabbing a bite to eat. Look for locks that offer a balance of security and convenience, with features like adjustable lengths and heavy-duty cables. Consider how you'll use the lock—on a rack, fence, or standalone—and choose one that fits your needs.
A secure bike lock should have a heavy-duty cable or chain, a tight lock mechanism, and ideally be adjustable to fit different setups. Look for locks that are difficult to cut through and offer a secondary layer of protection. Some locks can be keyed alike with your bike rack for added convenience.
The right length depends on how you plan to use the lock. If you're securing multiple bikes or need to wrap around larger objects, opt for a longer cable. Adjustable locks offer flexibility for different scenarios, like securing a gate or multiple bike frames.
Features like a protective coating to withstand weather, a tight-fitting cap to keep out grime, and the ability to be keyed alike with other locks enhance usability. These features ensure the lock remains functional and easy to use in various conditions.
Yes, bike locks can be versatile. They can secure gates, fences, or other outdoor equipment. Their adjustability and strength make them suitable for various security needs beyond just bikes.
Look for locks that are straightforward to install, with clear instructions and minimal tools required. A lock that fits well with your existing setup, like a bike rack, and offers easy locking and unlocking will make your experience hassle-free.
Cable Locks
U-Lock
Bike Locks Parts or Accessories
Filters
