2009 BMW 5 Series Cabin Air Filter

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not…

For your 2023 Subaru Outback, I recommend the Curt Trailer Hitch item #C69VV. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. I really like this hitch…

I attached a picture that shows what the three different styles of wiper blades look like. Beam and Frame are the most different and Hybrid is mix of the two. The #MCH8519 is the hybrid style in the middle.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes the Timbren Rear Suspension Enhancement #TDR2500D you were looking at for your 2018 Ram 2500 will fit perfectly. They will be slightly compressed with your Titan 50 Gallon Fuel Tank full, but that is to be expected as that is quite a bit of…

The Timbren Rear Suspension Enhancement System #TDR2500D has a height of 6-3/4" if you use the provided spacer and 5-3/4" without it. This system is a confirmed fit for your 2017 Ram 2500, will not…

The BAKFlip MX4 Tonneau Cover #BAK48330 for the 2022 F-250 short bed has 4 panels. While you are using your Demco Autoslide 5th Wheel Hitch #DM8550024 you will be able to keep one panel laying flat on the bed. There are tow ways you can store the…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

In order to add a brake controller to a 2021 Subaru Outback you'll first need to start with a 4-way trailer connector, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #118467 is what I recommend.…

Since your 2021 Subaru Outback Wagon does not have factory trailer wiring you'd need to first install a 4-way with part #118467 and then convert it to a 7-way with a 7-way adapter like the part #37185 to give you the 7-way.…