Cold Air Intakes Specs:
Go confidently though deep water crossings by moving your air intake above your vehicle's hood. Snorkel improves overall engine performance by preventing water and dust from getting into your engine, giving you better air flow.
More Information >Videos
for Cold Air Intakes
Help Articles
for Cold Air Intakes
Expert Answers
for Cold Air Intakes
Hey Gary, I really like B and W fifth wheel hitches like the Patriot part #BWRVK3255 if you have a set of above bed rails or the Companion hitches are really nice too but they are designed to fit OEM puck kits or their Turnoverball rail kits. If I…
view full answer...Yes, it does. The Hellwig EZ-550 Helper Springs item #HE72FR installs directly above your 2018 Toyota Tacoma's leaf springs. You will not need to modify anything.
view full answer...The big difference between the two SuperChips programmers you mentioned of #SU1845 and #SU4845 is that the #SU4845 has been approved for use in the state of California. Aside from that it's the exact same programmer so you'd need to pick…
view full answer...To flat tow your 2018 Jeep Wrangler JL you will need to start with compatible base plates; because you have a Blue Ox tow bar and assuming you have the standard factory bumper the best option is the Blue Ox Base Plate Kit #BX1139 which will be…
view full answer...There is one key difference between the Blue Ox Patriot 2 Portable Braking System part BRK2016 and the Blue Ox Patriot 3 Portable Braking System part #BLU37TR. The difference is an extra safety measure built into the Patriot. The Patriot #BLU37TR has…
view full answer...Thank you for the information! The replacement motor for your Lippert 644433 Hydraulic Power Unit is found as part #LC167576 on our site. I confirmed this with my contact at Lippert. Attached is a review video for you to check out.
view full answer...The most beneficial component that you can add to your motorhome's suspension is a rear anti-sway bar or in your case, an upgraded rear anti-sway bar. For your 2014 Forest River Georgetown 360DS on a Ford F-53 Chassis, I recommend the Roadmaster…
view full answer...Everything I am seeing about a 2018 Tiffin Allegro 32SA is that it has a 24,000 lb chassis, so you'll want to verify what your chassis GVWR is before ordering. Here are the options for both the 22k and 24k front SumoSprings, with the right one…
view full answer...Your 2021 Tiffin Open Road 36UA is built on a 2020 Ford F-53 Chassis with a GVWR or 26,000lbs. This will accept the SumoSprings Rebel Custom Helper Springs #SSF-173-40-2 for the front axle and SumoSprings Maxim Custom Helper Springs #SSR-183-54-1 for…
view full answer...Let me see what I can figure out for you, I have the solution linked below: **SumoSprings Rebel Custom Helper Springs - 2 Piece - Front Axle #SSF-173-40-2. There was a generation change in the F-53 chassis, Ford changed the motor to the 7.3L V8. When…
view full answer...Since your Thor ACE is built on a 2015 Ford F-53 chassis then there are front helper spring options that will fit. I have included a link to them for you. For SumoSprings specifically if your model is rated for 24K to 26K GVWR then you can use…
view full answer...The bolt that is attached to the top of the SumoSprings Rebel Custom Helper Springs - 2 Piece #SSF-173-40-2 is a 3/8" x 3/4" flange bolt. This bolt is not offered as a separate part but you could easily go down to your local hardware store…
view full answer...Filter Products (1)
Contact and Help
What our customers are saying:
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN