7-1/2" x 3-5/16". Waterproof, 2-function trailer tail light acts as tail and reverse light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Accepts industry-standard 3-prong plug.
Features:
Specs:
This white LED light serves as an exterior light for your trailer, RV, or other application. The light gives your RV or trailer a distinctive look that's completely street legal. This Optronics GloLight has a unique solid light pattern when lit, so your lights stand out from the rest. Optronics GloLights are a great way to add both style and value to your RV or trailer.
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
This light has an industry-standard PL-3 connection as pictured above. The light accepts a 3-prong plug (sold separately).
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Optronics Glow Light taillight and reverse light. This waterproof light provides a red taillight, and white reverse light for your trailer. Has the glow light lens that creates a solid circle of light, with a nice smooth appearance. So the outer band glows red, and the inner area is white when you activate the reverse function of the vehicle and trailer.It's a sonically sealed, waterproof housing and lens unit that is submersible. Features durable surface mount technology. When it comes to the construction of the LED circuit board, that better withstands shock and vibration, and allows for improved heat distribution.
Now LEDs make great replacements for incandescent lights. They last longer, they burn brighter, and they're more efficient. With LEDs, you don't have to worry about replacing bulbs, and you don't have to worry about brittle filaments.We're looking a polycarbonate housing and acrylic lens. It's a surface mount installation, with the built in mounting flange. Mounting hardware not included.
And then here on the back, it accepts an industry standard three prong plug, which is sold separately. Taking a look at the overall dimensions real quick, then we'll hook it up to power, so you can see what it looks like with power running to it. Edge to edge going this direction, is about 7-1/2 inches. Edge to edge this direction is about 3-5/16. And then the overall depth, that's back to front, is about 1-1/8 inches deep.The mount holes are separated on center going this direction, by about 2-3/4 inches.
And then going this direction, they're separated on center by about seven inches, maybe 6-15/16 inches, right in that area. Alright we're going to go ahead and hook it up to power, that we can see what it looks like. So you can see here, it sends out a really nice, clear, consistent signal. This is that outer band that's red in color. And then when we activate the reverse function of the trailer, that center area will glow white.That contains a total of 22 diodes, or LEDs, so the multi diode design really helps optimize the overall light output.
Power draw at 12.8 volts, is 0.50 amps. And Optronics puts a lifetime warranty on the LEDs. That's going to do it for today's look at the Glow Light taillight and reverse light from Optronics.
Average Customer Rating: 4.8 out of 5 stars (1323 Customer Reviews)
7-1/2" x 3-5/16". Waterproof, 2-function trailer tail light acts as tail and reverse light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Accepts industry-standard 3-prong plug.
I really like the bright back up lights. It does take a little extra work for the back up lights. - Sorry this pic doesn't show the backup/stop lights but this is the great little chuckwagon we put them on.
The lights are good and standard size, but they seem to have a slightly off plug receptical. I ordered 6 of them and all seemed to be the same. I had to bend my connectors with a pliers a little bit to get them plugged in.
Being used to put back up lights on trailer. Never had back up lights before. Very well made.
Still good
etrailer does provide a wide range of products with different price points so the customer has a lot of choices to make the decision that is right for her\him. You also offer good online support documentation and your technical staff is also very helpful in helping the customer make the right choices.
Unfortunately, you left me with a very bad experience. I ordered a full set of lighting & wiring to redo our quad trailer from the 7-pin plug to reverse lights. A large order. I erroneously ordered 2 reverse\turn single lights, which is on me, so I expected a restocking fee (a little excessive, but that's the inventory business). I had to return the 2 wrong lights and order the correct one. I returned both lights, but etrailer said they only received one, which I was 99% sure I returned both. You had no interest or showed any flexibility considering maybe I was correct. This is a one year review you have asked me to submit and the light you claimed I did not return, still has not shown up in my garage. I liked dealing with you on numerous occasions, but I have taken my business elsewhere. That was a sad experience.
Amazing upgrade from the old metal lights even with led replacement bulb in the metal cans. One video is the halo tail lights installed, the other is chasing a ground issue with the old lights for comparison.
These lights are totally amazing, very bright and small footprint, just need a 3/4 drill bit and they fit like a glove, will buy more for other boat trailer upgrades.
I have had these installed for a year now on my 14ft utility trailer. I love these lights! They are strong, durable, bright, and look so super cool at night! Most recently, last month, I trailered 1500 miles and through the mountains in West Virginia. They held up through curves and bumps and rainstorms and even dime-sized hail! I would recommend these to anyone who needs this style of light! I wish I had brackets enough to put two on each side... just so it would look extra bada**!
The Igor worked great. I had a heck of a time trying to order lights for the trailer - either not getting the ones I intended getting or mismatched lights. But you came through like me a champ. Thanks.
a little loose in the side marker bracket, but easily solved with a wiretie.
Added Glolight LED's to my trailer. Much brighter than the factory originals. Makes launching pre sunrise much easier. You can see where you are backing up.
Excellent replacement. Looks like original ones and simple to install. Tried to replace bulbs in old one's they would not hold contact and bulbs were almost as much as the replacement I saved time and anguish by just replacing the old ones
Perfect for replacing the older lights on the trailer
Very durable! After a year of use they as. Right as the day I installed them. Speaking of which, there was no surprises with this either.
Was not happy with the packaging. GloLights were not packaged, just placed loose in the box with other items. One piece of brown paper in the box for a void filler. Lights were scratched up when arrived.
Upgrading our 1998 Coleman Grandview, the old incandescent just seemed too dim.
Nice light, only suggestion would be to list some wiring options, was a bit confusing going from the old Bargman to the new LED.
But I read through the Bargman page here and got squared away.
Pic is LED before anchoring compared to the stock on the right. BIG improvement.
Excellent hi vis lighting for my traile r.
This one is for the “driver” side. It has the lens on the bottom for lighting the license plate. (It does not include the license plate holder. I like this one because you just push in the wires. I recommend this light.
Great light and bright....
Do you have a question about this Work Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.