Product Experts Available Now!
Call 800-298-8924
Spare Tire Carrier
/
Dutton-Lainson
/
Frame Mount
/
5-Bolt
/
6-Bolt
/
3 Inch Frame
Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson
(24 reviews)
Price: $111.22
In Stock
Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson
Item # DL22145
Retail:$133.88
Our Price: $111.22
You Save: $22.66This item qualifies for Free Shipping
- Frame Mount
- 5-Bolt
- 6-Bolt
- 3 Inch Frame
- Offset Style
- Dutton-Lainson
- All Info
- Reviews (24)
- Q & A (19)
- Videos (1)
- Photos
- Why etrailer?
Dutton-Lainson Spare Tire Carrier - DL22145
Offset Spare Tire Bracket
Heavy duty carrier extends spare tire at an angle to avoid damage or marring of boat finish. Fits wheel sizes from 13" - 15", with trailer tongues up to 3" x 5". Zinc TUFFPLATE finish.
- Extends spare tire bracket out at an angle, farther away to the side of the trailer
- Fits 13" to 15" wheels
- Fits 5 on 4-1/2 bolt pattern and 6 on 5-1/2 bolt pattern
- Will not fit 4 hole rims, 5 on 4-3/4 bolt pattern, 5 on 5 bolt pattern or 5 on 5-1/2 bolt pattern
- Fits trailer frames up to 3" wide x 5" tall
- Zinc TUFFPLATE finish
- Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish. Results of lab test using 5 percent neutral salt spray confirms our TUFFPLATE finish provides in excess of 500 hours against First Red Rust and in excess of 100 hours of First White Corrosion.
- Made in the USA
22145 Offset spare tire bracket by Dutton-Lainson Model 6126
Video of Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Dutton-Lainson Extra Offset Trailer Spare Tire Carrier Review
Today we're going to install and take a look at the Dutton Lainson extra offset trailer spare tire carrier, part number DL22145. Here's what our carrier will look like with our spare tire mounted. As you can see, from the angle of the carrier and then the angle of the face of the carrier that our wheel mounts to, it angles the tire out away from the frame so that we get plenty of clearance between the spare tire and the boat. Now our carrier is designed to fit 13 and 15-inch wheel or rim tires. It will fit 5 on 4 and 1/2-inch bolt pattern and 6 on 5 and 1/2-inch bolt pattern through the 3 studs to bolt to the carrier. Currently we're on a 5 and a 4 and 1/2-inch bolt pattern and we can use the other 3 studs by simply taking the studs out and driving them into the other 3 pre-drilled holes for the 6 and a 5 and 1/2-inch bolt pattern. When bolting to our frame, the carrier is designed to fit a maximum width of 3-inches and maximum height of 5-inches. The carrier and hardware is zinc-plated with a tough plate finish that has 3 times the corrosive resistance of a standard zinc-plated chrome process and 30% greater resistance when compared to powder-coated finishes. Now to mount our spare tire carrier we'll have the main body and bracket that will get clamp to our frame.
I'm going to put my 2 top bolts in place first and slide the bracket on the back, then install the flange nuts. This will help hold the unit in place until we get all our hardware in position. We have multiple pre-drilled holes and we want to stay as close to the frame as possible. Now you'll notice that the nuts don't thread on all the way, because they're lock nuts, once they're in place they're intended to stay in position. Once we have all 4 fasteners in place we're ready to go ahead and tighten them down. Once we have our spare tire carrier securely mounted, we'll go ahead and put the spare tire on, and use the lug nuts provided to secure it to the plate.
Once I got all 3 started we'll just go ahead and tighten them down like we would a wheel. That'll do it for our install and review of the Dutton Lainson extra offset spare tire carrier, part number DL22145. .
Customer Reviews
Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson - DL22145
Average Customer Rating: 4.5 out of 5 stars (24 Customer Reviews)
- DL22145
by: Lou02/11/2019
This mount is perfect! I have a Tracker Pro 170 and the trailer isn't huge and has a folding tongue. I wanted an angled mount that would keep the spare tire away from the hull so I wouldn't run the risk of hitting the tire when putting the boat back on the trailer. This mount is EXACTLY what the doctor ordered. It was super easy to install and I can still fold the tongue enough to where I can still fit the boat in my garage. NOTE: The front photo doesn't do justice to just how much room there is between the hull and the spare. 604259
- DL22145
by: Jim H.08/09/2012
I couldn't use a straight spare tire bracket on my boat trailer, so I bought this angled spare tire bracket along with a spare tire and tire cover. I was very pleased with the email updates on the shipping status and that it arrived pretty quickly (~3 to 4 days) free shipping. The bracket is very good quality. I had to do some trial and error on the location I placed the bracket on the trailor to avoid having the tire touch the ground (learned the hard way the first time, did some cosmetic damage to the tire cover). Looks good when fully installed, and came in handy two weeks after I got it - flat tire on a major highway. Make sure your you have the correct lug nut wrench. My vehicle lug nut wrench did not match the trailor lug nut size. 51156
- DL22145
Paul G - 03/29/2015
10435
by: Paul G.03/29/2014
Great product !! Arrived on time, undamaged with all parts. Simple installation with a box wrench and a ratchet wrench. The self locking "hat nuts" were a pleasant surprise and simplified installation while making the long term use more secure. Best of all, the angle of the tire mount provided the clearance I needed to (try to) avoid a collision with my boat when retrieving it from the water. 122796
Comments
It is continuing to provide great service holding the spare in place.
Paul G - 03/29/201510435
- DL22145
by: Jeff S.05/30/2017
Spare tire holder works great. I have a 6 hole rim, but it also fits some 5 hole rims too. Puts your tire at an angle to avoid marks on the hull. 386676
- DL22145
Gregory B - 06/01/2017
24478
by: Gregory06/01/2016
The extra offset of this spare tire carrier is perfect for smaller boats with shallower hulls. A typical carrier wouldn't work with my boat and trailer combination. etrailer.com makes finding and buying the right product fast and easy. 255135
Comments
Its been a year and still working great!
Gregory B - 06/01/201724478
- DL22145
by: Aaron W.04/04/2019
Good, quality product as advertised. Would recommend and purchase again. 616999
- DL22145
by: Andy04/02/2019
Good quality Does just as advanced 616301
- DL22145
by: Gary07/12/2017
Exactly what I needed. Feee shipping high quality product. 404658
- DL22145
by: JimW06/14/2017
Great product and quick shipping. This one looks like it was built to last! 393013
- DL22145
by: Mark06/11/2017
Great product. Heavy duty and made in the USA! 391782
- DL22145
by: Bob5404/22/2017
Been trying to build one of these for a while now ! This is just what i wanted ! Well made ! Put together in about 15 minutes including mounting spare . Would recomend if you can't mount under trailer or on the side straight up !! Thanks for taking the hassle out of mounting my spare !!!! 371026
- DL22145
by: Vinnie B10/13/2016
Well made product - good welds and support - esp. for a tilted version of a spare tire carrier. 306333
- DL22145
Johnny B - 06/26/2017
25447
by: Johnny B06/26/2016
As discribed just what I was looking fo r. 265286
Comments
Havent had a flat tire tire yet however still holding up still looks good.
Johnny B - 06/26/201725447
- DL22145
by: JoeR06/01/2016
Great spare tire mount. I have a V hull Lund fishing boat and the traditional vertical mount that I purchased previously did not allow for me to see the side trailering light on the wheel well when mounted. So, I decided to give this one a try, and it did the trick. I was able to mount it further toward the front of the trailer, avoid any contact with the hull, and now can see my running lights! Thanks e-trailer! 255096
- DL22145
by: Lance M.06/25/2015
This item works as designed. The angled mount was required to keep the tire away from the boat and off the ground. The mount and hardware are high quality. 207027
- DL22145
by: Gary S06/12/2015
Just received my spare tire carrier...haven't installed it, but appears to be a quality mount. George gave us quicker shipping than was originally stated for a free upgrade! Ordering was easy and again they upgraded shipping for no extra charge! That's the way to do business! I appreciate it! Will deal with you guys again! 203023
- DL22145
by: Steve S04/20/2015
Great Product 186841
- DL22145
by: Jim S03/16/2015
Bolts very difficult to advance but secure well once on. Very solid product. 178453
- DL22145
by: Adam Mayhem11/03/2014
This product seems like it is very durably built. It fit my frame as advertised, and is built with the correct angles mentioned in the Q&A section. It is a bit expensive compared to other similar products, but it was the only one I saw that holds the spare tire angled down. My spare is a 5 lug on 4.5" and all three lugs fit perfectly. 159017
- DL22145
by: Eric J.10/15/2014
Perfect--just as advertised. 155956
- DL22145
by: Bob S06/18/2014
Works great. Can be found cheaper else where. 136471
- DL22145
by: Bill S06/11/2014
Works great. However, can be purchased elsewhere for about 1/2 the cost elsewhere. 135218
- DL22145
by: Mark03/21/2014
Bolted it up last night works as described. Thanks! 121602
- DL22145
by: Craig C06/03/2011
The item is very sturdy and well constucted. I intended to use the item on the body of the trailer, but had to put it on the tongue instead. The angle of the arm from the mount is not steep enough. Once the tire was on, there was only about 10 inches of clearance from the groung to the tire. Some boat ramps are too steep and the tire appeared that it might rub. The manufacturer need to increase the angle so that the arm is higher and the spare has at least 12-14" between the tire and the ground. 16071
29
29
Ask the Experts about this Dutton-Lainson Spare Tire Carrier
Do you have a question about this Spare Tire Carrier?
- Availability of Under-Trailer Hand-Crank Spare Tire Carrier
- We do offer a broad range of spare tire carriers that include simple U-bolt types such as the CE Smith # CE22007Z-11050-2 and more elaborate carriers that include extra offset such as the Dutton-Lainson # DL22145. However we do not currently offer one that operates with a hand crank to raise and lower it from the bottom of your trailer's frame.
The link provided will show you all spare tire carriers we have.
view full answer... - Determining Bolt Pattern On Trailer Tire For Spare Tire Carrier # DL22145
- When you have an odd number of lugs you need to measure the distance between the center of one bolt hole to the center of the bolt hole adjacent to it. I have linked you to an FAQ article that shows how to determine the bolt pattern of your wheels. If you did measure the adjacent holes and they are 2-5/8 inches center to center, then your bolt pattern is 5 on 4-1/2.
If after measuring you determine the bolt pattern is 5 on 4-1/2, then the Offset Trailer Spare Tire Carrier by Dutton-Lainson,...
view full answer... - Dimensions of Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson
- I took some measurements of the Dutton-Lainson Extra Offset Spare Tire Carrier # DL22145 for you. I've attached a couple photos to assist. From the base to the closest edge of the plate where the tire connects it is 7-1/2 inches. The bottom of the support shaft is 8-1/4 and the top of that support is 9-1/2 inches from the front plate that mounts to your 4x4 inch bumper. The bolt holes are 3-3/4 inches horizontally and vertically they are 3-1/2, 4-1/2, and 5-1/2 inches. The angle of...
view full answer... - How Far Out From the Trailer Will the Dutton Lainson Spare Tire Carrier Extend
- I pulled a Dutton-Lainson Extra Offset Trailer Spare Tire Carrier # DL22145 to measure for you. Check out the picture I attached that shows the dimensions.
From the trailer frame surface to the closest portion of the mounting flange will be 7-1/2 inches. From the frame surface to where the mounting flange touches the extension piece on the close side is 8-1/4 inches and on the further away side is 9-1/2 inches.
view full answer... - Spare Tire Carrier Options for Trailstar Boat Trailer
- One carrier I recommend you check out is the Dutton-Lainson Extra Offset Trailer Spare Tire Carrier # DL22145. This carrier is designed to fit trailer tongues up to 3 inches x 5 inches and wheel sizes 13 inches - 15 inches that have 5 on 4-1/2 or 6 on 5-1/2 wheel bolt patterns. I have attached a review video of this carrier on a boat trailer for you.
Another option is to use a more traditional spare tire carrier like the CE Smith Spare Tire Carrier for Trailers # CE22007Z-11050-2. With...
view full answer... - Spare Tire Carrier Recommendation for Front of Trailer
- The Dutton Lainson Spare Tire Carrier part # DL22145 that you referenced has the terms "extra offset," in the title because the mounting surface is pushed out pretty far away from where the mount would attach to a trailer frame.
If I am understanding the setup you are looking to do on your trailer I think a U-bolt carrier like the part # CE22007Z-11050-2 would work well for you. You would install the u-bolt through the wall of your trailer and then attach your spare on the other side of it.
view full answer... - What is the Angle of the Extra Offset Trailer Spare Tire Carrier, # DL22145
- I went out to the warehouse and pulled an Extra Offset Trailer Spare Tire Carrier, # DL22145, to measure. Using an angle finder, I determined that the stem is angled up 20 degrees and the surface where the spare would mount is angled down 65 degrees. This is assuming the mounting bracket is flat against a level trailer frame.
view full answer... - Mounting Bracket Dimensions for the Extra Offset Trailer Spare Tire Carrier DL22145
- From left to right on the mounting bracket the hole spacings measure 3-3/4 inches. From the top holes down to the next set of holes measure 3-1/2 inches and then the closer together holes below that measure 1 inch apart.
view full answer... - Will Dutton Lainson Spare Tire Rack # DL22145 Fit 2010 Nytro Bass Boat
- The Extra Offset Trailer Spare Tire Carrier # DL22145 will work great on your 2010 Nytro Bass Boat. I attached a picture of it installed on a similar fishing boat to show you how it will install on your trailer as well.
view full answer... - Recommended Spare Tire Carrier for 15 Inch Trailer Wheel on Off-Road Trailer
- You could mount the Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson # DL22145 with the spare tire tilting toward or away from the coupler. You could alternatively use the Fulton Economy Spare Tire Carrier with Lock # FETCHL0700. Either of these options would still give you the ground clearance for off-road trailering.
Another alternative is to use the Curt Trailer Hitch Mounted Spare Tire Carrier # C31006 along with the Curt Multipurpose Ball Mount with 2" Receiver for Bike...
view full answer... - What are the Angles of the Arm and Mounting Surface for Offset Trailer Spare Tire Carrier # DL22145
- I went out to the warehouse and pulled an Extra Offset Trailer Spare Tire Carrier, # DL22145, to measure. Using an angle finder, I determined that the stem is angled up 20 degrees and the surface where the spare would mount is angled down 65 degrees. This is assuming the mounting bracket is flat against a level trailer frame.
view full answer... - How to Remove Studs of Spare Tire Carrier # DL22145 to use with 6 Lug Wheel
- To use the Extra Offset Trailer Spare Tire Carrier # DL22145 with a rim that has a 6 on 5-1/2 inch bolt pattern you will need to drive out the studs on the carrier face with a hammer and then drive them back into the other holes of the carrier.
It would be a similar process as replacing wheel studs on a car or trailer hub. You would just need to hit the studs with a hammer squarely like a nail and they will come out. These won't be pressed that hard into the carrier so it shouldn't take...
view full answer... - Dimensions of Dutton-Lainson Extra Offset Spare Tire Carrier # DL22145
- I attached a picture of the Dutton-Lainson Extra Offset Spare Tire Carrier # DL22145 that you referenced that has all of the dimensions you asked for.
view full answer... - Will Trailer Spare Tire Offset Carrier # DL22145 Fit 5 on 4-3/4 Bolt Pattern
- I have a solution for your 5 on 4-3/4 quandary! The Ultra-Fab Folding Spare Tire Carrier # UF15-954730 will accept your 5 on 4-3/4 spare. This carrier a 4 inch square RV/trailer bumper. I tested this combination in house by literally hooking the Ultra-Fab # UF15-954730 to a 5 on 4-3/4 wheel to verify they would fit together and it worked.
The Dutton-Lainson Offset Spare Tire Carrier # DL22145 that you referenced only fits 5 on 4-1/2 and 6 on 5-1/2 bolt pattern, so, it will not fit your...
view full answer... - Can Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson Fit Bayliner Boat Trailer Frame
- The Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson # DL22145 will work great on your boat trailer. Due to this is carriers very universal design it will easily fit under the hull of the boat. Worst case scenario you'll have to try a few different positions on the boat frame to match the clearance of the hull angle/clearance. As long as the trailer frame is no more than 3 inches wide and 5 inches tall you'll be fine.
I attached an install video for this carrier for you to...
view full answer... - Can Dutton Lainson Extra Offset Trailer Spare Carrier DL22145 Fit on I-Beam Trailer
- Yes, the Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson Item # DL22145 that you referenced is compatible with I-beam style trailer frames. As long as the frame dimensions are up to 3" wide x 5" tall this would fit and work well.
view full answer... - Does the Trailer Spare Tire Carrier # DL22145 Fit 13-15 in Diameter Rims or Tires
- The Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson # DL22145 that you referenced can fit 13-15 inch RIMS, so it should work fine with your 15 inch wheel that has a tire diameter of 22 inches.
As long as your rim has 5 on 4-1/2 inch bolt pattern (it should) it would work well for you.
I attached an FAQ on determining bolt patterns for you to check out.
view full answer... - Spare Tire Mounting Location on Trailer Frame
- The spare tire can be mounted near the wheel and axle to the frame, but you will want more than 5 inches of ground clearance. I recommend the Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson # DL22145 based on your photo. Every extra inch will help as trailer suspension normally has a deflection of about 4 inches so just 5 inches would be pretty tight but can work in most cases.
Another option if you have enough tongue space to mount the tire vertically, you can use the...
view full answer... - Will MaxxTow Spare Tire Carrier Fit 3" x 4-1/2" Frame?
- Yes, the MaxxTow Spare Tire Carrier # MT70214 will fit your frame. This carrier will work with frames that are a maximum of 3" wide and a maximum of 5" tall, so it is going to work well on your frame, which is 3" wide and 4-1/2" tall.
The bolt hole pattern refers to your trailer's wheels; this carrier works with 4 on 4" or 5 on 4-1/2" bolt pattern.
view full answer...
Do you have a question about this Spare Tire Carrier?
Why etrailer.com?
At etrailer.com we guarantee:
Highest quality spare tire carrier for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate spare tire carrier information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Satisfaction Guarantee
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Lori W
Photos by:
Amber A
Expert Research:
Jeffrey L
Photos by:
Zach O
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.