Brake Buddy Select 3 Portable Flat Tow Brake System - Proportional
Item # HM39524
Retail:$1,791.00
Our Price: $1,536.92
You Save: $254.08
Confirmed to Fit
2013 Toyota Highlander
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (274)
- Q & A (0)
- Photos
2013 Toyota Highlander - Brake Buddy Select 3 Portable Flat Tow Brake System - Proportional
- Brake Systems
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Proportional System
- Brake Buddy
- Portable System
This portable unit gets you smooth braking without a complex installation. Senses the RV braking and applies the brakes proportionally. Easy to swap between multiple towed cars: settings adjust for safe, even braking for any size car.
Features:
- Applies towed vehicle's brakes proportionally for comfortable braking
- Measures motorhome's braking and activates car's brakes with same intensity
- Prevents false braking with terrain-sensing technology
- Lets you adjust force and sensitivity for smooth braking
- Swaps easily between multiple towed vehicles
- Requires a second vehicle kit (BB59SR - sold separately) for each alternate car
- Adjusts easily to fit in almost any vehicle
- Sits level for optimal performance thanks to adjustable feet
- Clamps easily around almost any brake pedal
- Allows you to control and monitor braking with handy wireless remote
- Plug into 12V accessory outlet or use with AA batteries
- Easily check readouts for potential problems
- Change braking modes and settings from the cab of your RV
- Gets ready to tow with 1-touch auto start
- Removes excess vacuum pressure from your car's brakes
- Checks braking system for errors
- Keeps car's battery fully charged with 15-amp battery charge line kit
Specs:
- Compatible with hybrids and other cars with electric power-assist brakes
- Dimensions: 19" long x 11-3/4" wide x 6-3/4" tall
- Power draw at 12V: 15 amps
- Range of adjustable feet: 1" - 4" tall
- Power harness length: 36"
- Weight: 12 lbs
- 5-Year limited warranty
Do I Need a Braking System for Flat Towing?
A braking system is a must when towing a vehicle behind your motorhome. Without it, the weight of the towed car can create a safety hazard, strain your RV's brakes, and affect the warranty of both your car and motorhome. Most states legally require a supplemental braking system, so if you don't use one and you end up in an accident (which is more likely since your RV takes longer to come to a full stop), your insurance and liability headache just doubled. You also won't have any breakaway system; if there's an accidental disconnect, there's nothing to bring your car to a stop.
Pros of a Portable System
First, this system is great for DIYers, since you can get the basic installation done yourself. There will be some minor wiring to do under the hood and in the cab, but that's as complicated as it gets.
Second, it offers you a lot of flexibility. It's easy to move from one toad (towed vehicle) to another - or, if you think you'll likely get a new car down the road, you can easily set the Select 3 up in your new toad.
How Does the Brake Buddy Work?
The Brake Buddy Select 3 uses a built-in inertia sensor to detect when your flat tow setup begins to slow down as you apply the brakes in your motorhome. The moment the system recognizes the change in momentum, the actuator will press down the brake pedal of your toad proportionally: at the same time, with the same intensity. Meanwhile, the terrain-sensing technology keeps the unit from activating when you go over bumps in the road, so it doesn't brake when it doesn't need to.
Compatible with Hybrids and Continuous-Power-Assist Brakes
If you're towing a hybrid or any car with continuous-power-assist brakes, all you have to do to be able to use the Brake Buddy is change the Braking Mode to Hybrid.
Setting Up the Brake Buddy Select 3
You'll be setting up this portable unit in your toad every time you flat tow, so it's designed to be easy to do. And because it's so adjustable, it fits in almost any vehicle on the market.
Step 1: Position the Brake Buddy
Shift the driver's seat back and set the Select 3 on the floorboard. It's important that the unit sits as level as possible so the actuator has enough leverage to effectively push down the brake pedal, so adjust the feet of the unit to suit your floorboard if need be.
Each foot can be adjusted easily by hand or with the included wrench. Twist it counterclockwise, pull it down to the right length, and then twist clockwise to lock it in place.
Quick Tip: It's best to remove your vehicle's floor mat before installation to keep the Brake Buddy from shifting.
Step 2: Attach the brake pedal clamp
Next you need to get the clamp attached to the brake pedal with the Quick-Lock clevis. This adjustable clevis is designed to securely clamp onto the pedal regardless of its size or shape. Once you have the clevis fixed around the pedal, turn the lever to tighten it in place.
Step 3: Plug in and power up
Plug your Brake Buddy into the connector you'll have installed under the dashboard and then press the Auto Start button. The system will automatically boot up to your saved settings and then check your brakes, pushing and releasing the brake pedal several times to remove built-up vacuum pressure from the brakes and prevent over-braking. It will also check for any connection errors. Then you're ready to flat tow!
Braking Power Settings
The braking power settings control how intensely the Brake Buddy Select 3 applies your toad's brakes. When you are first setting up the Brake Buddy, choose the setting that's recommended for a vehicle of your toad's size:
| Vehicle Type | Recommended Braking Power |
|---|---|
| Hybrids | 10 - 20 psi |
| Cars and Compact SUVs | 25 - 45 psi |
| Small Crossovers | 25 - 45 psi |
| Crossovers and Small SUVs | 35 - 65 psi |
| Mid-Size Pickups | 35 - 65 psi |
| Large SUVs and Pickups | 45 - 75 psi |
After selecting an initial setting, press the plus or minus buttons on the control panel to fine-tune the power. The setting should be enough that your toad gives a slight tug at your RV when you brake. On the right setting, you won't be at risk of damage from over-braking. Once you've set the braking power, it shouldn't need to be changed unless you tow a different vehicle.
You can also customize the sensitivity. This determines how aggressively you need to brake in the motorhome for the Brake Buddy to activate your toad's brakes. If you set the sensitivity high, then your car's brakes will activate with just a light tap of your RV's brakes. Low sensitivity will mean the system only activates when your motorhome brakes significantly.
Full Braking
You can also select the full-braking mode. When in this mode, the Brake Buddy will activate your toad's brakes at the maximum preset intensity, regardless of how intensely your RV is decelerating. The full-braking setting is ideal for when you're towing a heavy truck or SUV, or if you're towing your car down a steep incline. By setting the power to a higher level, you can ensure that the momentum of your toad won't cause it to push against your motorhome.
Easy Remote Operation
It's important to monitor your toad's braking to make sure that everything's working the way it should. With the included remote, you can also control the Brake Buddy from the cab of your RV! It's just like having a brake controller in your motorhome.
With the remote, you can easily switch from proportional braking to full braking and vice versa with the push of a button. You can also change the Brake Buddy's sensitivity settings, which makes it easy to fine-tune the braking as you drive so that you can adjust based on feel. Finally, the remote will illuminate to alert you of any errors with the Brake Buddy system, including a breakaway event.
Breakaway System
The Brake Buddy also comes with a breakaway switch, an absolute must for safe flat towing. If there's ever an emergency situation where your toad becomes detached from the motorhome, the breakaway switch will immediately activate the brakes and bring your vehicle to a stop.
This switch mounts to the front of your toad and plugs directly into the unit. It includes a pin that connects to your RV's hitch receiver with a breakaway cable. If the toad and RV become disconnected, the cable will pull the pin out of the switch and trigger the braking system. A reserve air supply in the operating unit will then apply the brakes in the car.
39524 BrakeBuddy Select Three Portable Supplemental Braking System by Hopkins
Installation Details
California residents: click here
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Defective
- Product did not meet expectations
- Wrong item was ordered
Customer Reviews
Brake Buddy Select 3 Portable Flat Tow Brake System - Proportional - HM39524
Average Customer Rating: 4.5 out of 5 stars (274 Customer Reviews)
This portable unit gets you smooth braking without a complex installation. Senses the RV braking and applies the brakes proportionally. Easy to swap between multiple towed cars: settings adjust for safe, even braking for any size car.by: David E04/05/2023
Had a problem with the connection to the unit but called etrailer and they sent me a new one after sending the other back to them. The hole process very painless and the the staff at etrailer was great to work with. Thank you etrailer for your great response.
by: George02/08/2024
2024 Jeep Wagoneer L
I am still scratching my head on the placement of the Main Unit. The floorboard area of the 2024 Jeep Wrangler is very small. The 2 levels of the rear of the unit are such that I can't seem to get the right height to stabilize the unit. The seat can be brought slightly forward but does not contact or even come close to the Handle when raised. With the plunger all the way in, there is hardly one half (1/4") inch of clearance before beginning to press the brake pedal. I can't find anyone else that has installed this unit. HELP please.
Katrina D.
3/7/2024
Well scratch your head no more, George! Help is on the way! I have gotten in contact with Hopkins (Brake Buddy) and they have confirmed that when it comes to installing this Select 3 Portable Braking system on a Jeep Wrangler, you may need a Brake Buddy Clevis to help fill in that gap. This Clevis is Jeep specific and is generally provided by Brake Buddy themselves. I have gotten one ordered for you and you should receive it soon. Please get in touch with me when you receive it and let me know if you are needing any further assistance.
by: Kevin04/08/2024
2018 Jeep Wrangler
I LIKE THE BRAKE BUDDY SYSTEM FOR MY 2018 JEEP WRANGLER BUT THE DESIGN OF THE CONNECTION TO THE BRAKE PEDAL IS SOMEWHAT HARD TO GET CONNECTED. THE "CLAWS" SEEM TO WANT TO MOVE THE RUBBER COVER OFF THE PEDAL. THE ANGLE ALSO SEEMS TO ALWAYS WANT TO MOVE THE BRAKE BUDDY TOWARD THE DRIVER DOOR.
by: Don 02/01/2023
Once I got the right brake mount clamp and had the power cord from car to controller replaced, the unit has worked great, thank you.
Don
2/3/2024
Still great.
by: Henry 03/27/2024
It worked like it should. I did have to bend the connector on my brake buddy harness to make it stop shutting off when I 1st got it. It has been fine ever since.
by: Vince 02/25/2024
2020 Dodge Charger
First off, the great folks at etrailer had the kit pulled, labeled and ready for the shipper to pick it up literally within a few hours after I ordered it. Impressive to say the least. The Brake Buddy is packaged in an organized and protective layout with minimal assembly required.
Installation was pretty straightforward. If you can understand a pictogram of wiring, it’s a no-brainer for the charger and cab receptacle. Tow vehicle I installed it in is a 2020 Jeep JL. There’s a round firewall plug under the brake booster that makes for a great spot to run your wires through the firewall which makes installation a breeze.
The brake pedal clamp in the JL appears more functional if installed inverted. That gets the clevis reachable up top while keeping the actuator arm closest to level. The seat needs to be all the way back as wrestling the Brake Buddy into the floorboard is tight. There’s no room on the floorboards for vacuuming, even less for a portable brake module. The front leveler legs need to be fully extended, the one closest to the door on the rear, 90% extended and the rear interior one will only need an inch out.
Once installed and powered up, the compressor runs to charge the actuator control. Press the auto start and it pumps the brake pedal to eliminate any residual vacuum boost. I set the operating pressure to 45, sensitivity to mid and mode to proportional. I’ll fine tune it once we get out on the road. At this juncture, everything was in the kit, everything appears to work and etrailer filled the order with urgency and care!
by: James12/30/2021
Jeep Wrangler
I looked at several supplemental braking units and wanted one that was portable with nice features like wireless monitoring and parameter changes while flat towing my Jeep Wrangler. I reviewed the videos on the etrailer site for features and installation instructions, they’re well done and really helped with my buy decision and installation guidance. I decided on the Select 3 mainly because of the option for full or proportional braking, as I live in CA and take my RV through mountain passes often. The installation was straight forward with the help of the etrailer videos, very well done. The initial testing of the unit was a bit tricky, but it worked, after leveling the unit out. The first trip with the unit was from Southern CA to Paso Robles through the “Grapevine” pass and some other large hills, the unit worked well and gave me the extra braking I needed while flat towing my jeep behind my RV. During this trip, the unit was inconsistent in bleeding the brakes upon startup. I shared this information with etrailer in detail, and they sent me a replacement unit after trouble shooting. I want to thank etrailer for excellent support of a product which I entrust the safety of my family to while in use. The new unit has been wonderful on two other trips so far. I’m very happy with the performance and ease of use for the Select 3. It just takes a few minutes to position in the jeep, activate and get going down the road after the initial install was complete, which only took a few hours to run simple wiring. The unit is not very large or heavy, and easily fits in a normal storage compartment of the RV when we arrive at our destination. I look forward to many more trips with my family in our RV and the Select 3 giving us the supplement braking we need in our jeep on any road type.
by: Brenda10/24/2023
Don't really like this system and decided to just tow without a braking system at all and all is good by doing so. This unit is awkward, expensive and a pain to use
Katrina D.
10/28/2023
I would definitely look into your states laws on pulling a trailer with or without a braking system. For instance, in Missouri, by law a supplemental braking system is not required except on trailers coupled by a 5th-wheel and kingpin. While in Idaho the law states "Trailers with an unloaded weight of 1,500 lbs. must have an independent braking system, and a breakaway system." Please double check your states laws before proceeding without a braking system.
by: Abraham11/15/2023
The proportional breaking never worked right and on our last trip the system kept cutting out until it quit working all together. I was in the southern US and had to drive back to Canada without the aid of the breaking system. i tried to check it out and fix it but was unable to get continuous power to the brake buddy.
by: Charles05/10/2023
Well got it installed. Not to bad. Appears to work . Planning a trip in 2 weeks. Will post update
Charles
5/11/2024
Works Great, easy install, recommended
by: Michael09/25/2023
2020 Jeep Wrangler
Plug keeps getting loose on unit. I drilled a hole in the case and installed a tie wrap attaching wire to case no more movement of plug works great otherwise
by: Joe04/17/2020
Hi Miranda, here are the pictures of the bracket and Brake Buddy installed in my Jeep. Works very well. I tried to move the seat forward a bit but when the Brake Buddy activated it pushed the seat adjuster and moved the seat all the way back. Thank you for the bracket.
by: Jim03/13/2024
I ordered the brake buddy yesterday and paid for overnight shipment. The confirmation indicated I would receive it today by 8pm. To my surprise I woke up and discovered it on my front porch this morning. Amazing service
by: Jeffrey04/06/2024
2016 Ford Transit T350
On our first trip, still 2000 miles plus from going back home, and a short is developed in the cord end plugging into the unit. The video won’t upload; but as it’s bleeding the brakes the motion causes the unit to short out and turn off. Hardly safe.
Jenny N.
4/10/2024
Yikes! I reached out to Hopkins directly and they have a suggestion about it. Sometimes with this unit the male prong on the 4 flat connector that plugs into the unit will get bent inwards. When looking down on the prong you can see that it is split into 4 pieces. If the four pieces get bent together inwards then it will not make a good connection with the metal ground when plugged in. You can take a flat head screw driver and spread the pieces apart to fix it. Let me know if that works for you.
by: Howard12/27/2023
have trouble with the brake paddle attachment locking onto the brake. setting the brake buddy adjustment take a while to adjust.
by: Glen11/04/2023
Overall good performance so far with the Brake Buddy. The only issue that we had was the cable connected to the unit would come loose during operation and send a “check Brake Buddy” error on our remote. We were able to easily remedy this by using a screwdriver to spread out the connection terminal to make it tighter as per customer service instructions.
Customer service is great & very helpful!
by: Joseph 11/09/2023
Jeep Liberty
I have had the brake buddy system 3 for a year and it's a great braking system, I have no problems and its works great with my jeep liberty.
by: Robert08/24/2023
Nice unit, does what it is supposed to do and will noticeably slow my towed vehicle. It is a little cumbersome, but I set everything up in 8 or so minutes. Downside is that after one month long trip it would lose power after hitting a bump. Customer service was great and I eventually sent it back for repairs. They replaced a few things and has worked well until very recently. It appears that the plug will lose contact for a second over a bump and then the unit goes into a standby mode. The remote will let me know and I have to pull over and rebleed the unit. Some dielectric grease seems to have solved the problem
by: Paul 09/18/2023
2020 Jeep Wrangler
If you’re installing in a 2 door Jeep this brake buddy will install much easier if you 1. Remove floor mat 2. Set the driver seat all the way back towards the rear and 3. Lower the driver seat all the way down. By doing this the brake buddy will fit properly and allow for installing the cotter pin into the cleaver.
by: Traveler05/05/2024
Wiring is very sensitive, have to secure wiring in vehicle with zip ties so it doesn't come undone. Other than that it stops when it needs to
by: Jim01/29/2024
2005 Jeep Wrangler
The parts worked well with my application. 2005 Jeep Wrangler Rubicon (TJ)
by: Matthew10/22/2023
Easy to get the car ready for towing. Just a few minutes. The permanent wiring with a battery tender makes towing worry free.
by: Edward12/04/2023
2012 Chevrolet Volt
Looking good so far. The only comment I can think of is a question as to why the wiring is different then standard 12 volt wiring. For example, ground in normal 12 volt is the black wire. Hot is the red. etc. The brake buddy doesn't follow that standard.
by: William04/11/2024
WE had issues with the unit losing connection. This was corrected with a new cable. The unit does loose air pressure if it sits overnight. Other then that the unit works as expected.
by: Trevor06/07/2022
2014 Jeep Wrangler
This was super easy to install in my Jeep. The install video for the Wrangler was spot an very helpful. I installed a permanent brake system in another car before doing this one and I am so pleased with the install.
Now I am off to test it out.
Trevor B.
6/8/2023
Ive been using this for a year now and have set it up a couple dozen times or more. This was so much easier than an installed brakes system. The only issue that weve had with it has to do with the power cable that connects to the 4 pin connector inside the vehicle. After some time the connector gets loose enough to fall out which requires is to pull over and reset the system. From Brake Buddy the fix is to look at the pins on the cable and where the tips of the pins almost look like you could a screwdriver, use a pocket knife or something thin enough to fit into the slots and gently spread them apart. I definitely recommend this device for a good, simple brake system.
Mike L.
7/6/2023
@TrevorB They gave you great advice, that's exactly what we recommend to folks that have the same problem with their # HM39524 Hopkins Brake Buddy.
Helpful Links
25
273
Show More Reviews
See what our Experts say about this Brake Buddy Tow Bar Braking Systems
- Roadmaster Stow Master Tow Bar Compatibility With Roadmaster Crossbar-Style Base PlatesYes, Roadmaster Stow Master Tow bars are a compatible fit with the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms Item # RM-52357-4A with no adapters needed. You'll also need the following items to flat tow: Tow Bar Wiring: I recommend the Roadmaster Universal Hy-Power Diode Wiring Kit Item # RM-154. Braking System: I recommend the Brake Buddy Select 3 Portable Supplemental Braking System - Proportional Item # HM39524. Safety Cables: I recommend the Curt Single Hook, Coiled...
view full answer... - Parts Needed To Flat Tow 1987 Jeep Wrangler YJYes, we have all the parts needed to safely and legally flat tow your 1987 Jeep Wrangler YJ with manual transmission. First you need a base plate kit for your Jeep with a standard factory bumper (If you have the Off-Road Bumper with 1” D-Ringer Bumper Mounts, or Off-Road Bumper with 3/4” D-Ring Bumper Mounts, or Rugged Ridge XHD Bumper, just email me back for a updated recommendation.) The Roadmaster 1409-1 Crossbar-Style would be a good choice, but keep in mind this technical note:...
view full answer... - Parts Needed to Flat Tow 2016 Fusion Titanium Hybrid Without Adaptive Cruise ControlYes, we have all the parts and information you will need to safely and legally flat town your 2016 Ford Fusion Hybrid First you will need a vehicle specific base plate kit. For your Fusion Hybrid WITHOUT adaptive cruise control you can use the Roadmaster # RM-524434-5 kit. It is designed for use with motor-home-mounted tow bars, the direct-connect brackets are virtually invisible, easy to mount and remove, and they eliminate the need for a quick-disconnect crossbar on your tow bar. Installs...
view full answer... - Best Parts To Flat Tow 2019 Ram 1500 New Body Style With 3.6L EngineWe do have all the parts you need to flat tow your 2019 Ram 1500 with the new body style and 3.6L engine, and I'd be happy to make a list for you so you know what to get. That said, all of the parts needed to flat tow your truck are as follows: - Base Plate Kit: Demco Tabless Base Plate Kit # DM9519341 - Tow Bar: Demco Commander II Non-Binding Tow Bar # DM9511012 - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 - Supplemental Braking System: Brake Buddy...
view full answer...
- Installation Video of Invisible Base Plate Kit e86YR on 2018 Ford F-150We do have an installation video you can use as a reference for the etrailer Invisible Base Plate Kit # e86YR that fits your 2018 Ford F-150. I have added the link to the install for you below. Along with the base plates there are a number of other parts you'll need to flat tow your 2019 Ford F-150, and I'll make a list for you of everything required in case you are in need of other parts as well. - Base Plate Kit: etrailer Invisible Base Plate Kit # e98961 - Tow Bar: etrailer SD Non-Binding...
view full answer... - Parts Needed to Flat Tow 2020 Jeep WranglerFor a 2020 Jeep Wrangler with a standard factory bumper, the first thing you will need is the etrailer # e98948 Base Plate Kit so you can hitch to your Jeep. Add to that a tow bar. I would recommend the Roadmaster # RM-522 All Terrain – Non Binding tow bar. A non-binding tow bar will let you easily disconnect your tow bar even if your coach and towed vehicle is not on level ground or at a difficult angle. The tow bar is the one point in flat towing that gets the most stress and wear....
view full answer... - Braking system solution for 1999 Jeep Wrangler Flat Towed by 2013 Ford F150I would suggest using the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524. It is a great option that requires minimal installation for power and emergency brake away cables. It is also portable so it can be moved to different vehicles very easily. It includes a remote that you can use in your Ford F150 or any other vehicle with a 12 power supply. The remote allows you to receive feedback from the unit as well as be able to adjust the sensitivity while you drive. This...
view full answer... - Parts Needed to Flat-Tow a 2013 Ram 1500 OutdoorsmanIn order to flat-tow a 2013 Ram 1500 you'll need a base plate kit, tow bar, safety cables, flat-tow wiring harness, and a supplemental braking system. I have attached a list with each of these parts for you below. etrailer Classic Base Plate Kit part # e98945 etrailer XHD Non-Binding Tow Bar part # e94ZR Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524
view full answer... - Recommended Supplemental Braking System for a 2022 GMC Canyon that Works w/ Disconnected Battery You will want to follow the same wiring instructions. The Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524 includes a wiring kit that wires directly to your battery. This portable braking system is designed for flat towed vehicles like your 2022 Canyon that require you to disconnect the battery which kills your 12v plug. This wiring kit will also prevent your battery from dying while towing. Some of the accessory functions on your Canyon will still work and draw...
view full answer... - Parts Needed To Flat Tow 2023 Subaru CrosstrekThe only 2023 Subaru that has a base plate for flat towing at this time is the 2023 Subaru Crosstrek. Keep in mind, you can only flat tow the Crosstrek if it has a manual transmission. You will need the following parts to make a "kit": -Roadmaster Direct-Connect Base Plate Kit # RM-52927-5 -Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 -Roadmaster 4-Diode Universal Wiring Kit # RM-152-98146-7 -Brake Buddy Select 3 Portable Supplemental Braking System # HM39524
view full answer... - Recommended Jeep D-Ring Bumper Mounts for a Roadmaster 5250 Tow Bar Yes, there are a couple of adapters that will work with the Roadmaster Falcon 5250 tow bar and connect to the welded rings on your aftermarket bumper. For 1" rings you will want the Adapter for Jeep D-Ring Bumper Mounts item # RM-035-1. For 3/4" rings you will want the Adapter for Jeep D-Ring Bumper Mounts item # RM-035. You will want to confirm your bumper is rated to be flat towed with. I have listed some other parts you will need to flat tow your 2015 Jeep Wrangler Unlimited below. Tow...
view full answer... - Components Needed To Flat Tow A 2012 Ram 3500The Blue Ox Base Plate Kit # BX1989 would be a fit for your 2012 Ram 3500. With your Ram being 10,100lbs I'm a bit leery to use a tow bar with a 10,500lb capacity because you could easily overload the tow bar if you store anything in the bed of the truck. Personally, I would go get your truck weighed at a highway weigh station to know your exact weight before using the etrailer XHD Non-Binding Tow Bar # e67ZR. Most manufacturers recommend only using about 80-85% of a towing component's...
view full answer... - Parts Needed to Flat-Tow a 2022 Cadillac Escalade ESVIn order to flat-tow a 2022 Cadillac Escalade ESV you'll need a tow bar, safety cables, base plate kit, flat-tow wiring harness, and braking system. I have attached a list of these parts for you below. Roadmaster Direct-Connect Base Plate Kit part # RM85VR Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar part # RM-676 Roadmaster Universal Hy-Power Diode Wiring Kit part # RM-154 Roadmaster Battery Disconnect with Switch part # RM-766 Brake Buddy Select 3 Portable Supplemental Braking...
view full answer... - Roadmaster D-Ring Mount Adapter Compatibility With 2010 Jeep Wrangler JK And etrailer Tow BarBefore towing your 2010 Jeep Wrangler JK using the D-Ring Mounts on your aftermarket bumper you'll need to contact the manufacturer and confirm that the bumper is rated to tow with. If so then you can use the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM-035-1 or # RM-035 for 3/4" mounts. These adapter are only compatible with motorhome mounted Roadmaster tow bars. If you don't already have one I recommend the Roadmaster Falcon All Terrain,...
view full answer... - Do Any Fuses Need To Be Pulled To Flat Tow A 2013 Cadillac SRX To flat tow a 2013 Cadillac SRX you will not have to pull any fuses. You will however need a tow bar wiring kit, braking system, and safety cables to go along with your tow bar and base plates. If you haven't ordered these already then I have the following recommendations for you: Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This diode kit will allow you to use your Cadillac SRX's tail lights and wiring system while preventing feedback from your...
view full answer... - Should RV Flat Towing Breakaway Switch Mount to Base PlateWe can't recommend you drill into the base plate to mount the breakaway switch as that would void the warranty of the base plate kit. Instead I would recommend mounting the switch to the bumper of the vehicle.
view full answer... - How To Wire Brake Buddy Battery Charger 39339The BrakeBuddy Towed Vehicle Battery Charge Kit part # BB54FR comes with a the Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524. I have attached a wiring diagram of how this is setup with the Brake Buddy.
view full answer...
- Base Plate With Removable Arms For Flat Towing a 2000 Mazda Miata With Blue Ox Tow BarsCurrently the Roadmaster Crossbar-Style Base Plate Kit # 711-4 is the only base plate we have available for your 2000 Mazda Miata with removable arms. As you were looking at the Blue Ox # BX2514 I am assuming you have a Blue Ox tow bar. You can use the Roadmaster Adapter Kit # RO64FR to use the Roadmaster base plate with your Blue Ox tow bar. The base plate will require a Quick Disconnect Crossbar # 910021-00. The Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 will...
view full answer... - Recommended Base Plate Kit for a 2023 Jeep Wrangler Unlimited High Tide/Beach ModelsIt looks like the 2023 Jeep Wrangler Unlimited High Tide/Beach Models use the same bumper as the other models so the etrailer Invisible Base Plate Kit part # e98948 should be just what you need. In order to complete your setup you'll also need a tow bar, safety cables, flat-tow wiring harness, and braking system. I have attached a list of these parts below. etrailer XHD Non-Binding Tow Bar part # e94ZR Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 Brake Buddy...
view full answer... - Flat Tow 2021 Ford Ranger With Parts From ColoradoTo flat tow your 2021 Ford Ranger you can use the Roadmaster # RM-524459-5 "Direct-Connect" base plate kit (instead of crossbar style) that will work with the Roadmaster # RM-522 "Falcon" att terrain, non-binding tow bar that you already have. You mentioned that you already have safety cables - other wise see the Roadmaster # RM-645 cables. When your coach and towed vehicle are hitched together on level ground, the tow bar should be within 3” of level, otherwise you will need to add a...
view full answer... - Flat Towing Equipment Recommendations For A 2020 Ford Escape SE AWDThere are a few different transmissions models for the 2020 Ford Escape SE AWD so you will need to refer to your owner's manual to ensure you have the correct transmission to flat tow your vehicle and ensure you're following all necessary steps to get your vehicle flat tow ready. If you are capable of flat towing you'll need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you below: Tow Bar: Roadmaster Falcon All Terrain,...
view full answer... - Installation Instructions for Brake Buddy Select 3 Braking SystemI am sorry to hear that you did not receive the instructions for your Brake Buddy Select 3 Portable Supplemental Braking System # HM39524. But yes, there is an online version of the instructions and I have linked them here for you. The Brake Buddy Select 3 draws power directly from your towed car's battery. To do this, the included wiring harness connects to your car's battery. Install the harness by routing the wire end through your car's firewall and into your engine compartment. Connect...
view full answer...
- Recommended Flat Towing Equipment For A 2017 Hyundai Veloster To flat tow your 2017 Hyundai Veloster you would need a tow bar, base plate, tow bar wiring, braking system, and safety cables. You'll also need to refer to your owner's manual to ensure that your vehicle is able to be flat towed and follow any preparation steps it has listed to safely tow your vehicle. I have the following recommendations for you below: Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates - 2" RV Mount - 6K # e44ZR. This tow bar features...
view full answer... - What Is Needed To Safely Flat Tow A 2023 Chevy Silverado 1500 A 2023 Chevy Silverado 1500 will need to have 4WD and a two-speed transfer case, which will need to be placed in neutral, in order to safely flat tow. Your owner's manual will have a list of instructions to follow to switch your transfer case into neutral under the "recreational vehicle towing" section. If you don't already have your setup complete then I have the following recommendations: Baseplate: Blue Ox Base Plate Kit # BLU24TR. The arms of these baseplates are removable to provide...
view full answer...
Do you have a question about this Tow Bar Braking System?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Updated by:
Leah S
Updated by:
Mike S
Updated by:
Isabelle B
Updated by:
Noah M
Updated by:
Amanda K
Written by:
Alexander C
Test Fit:
Shane H
Test Fit:
Conner L
Test Fit:
Ryan G
Test Fit:
Bradley B
Test Fit:
John A
Video by:
Jacob H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David E.
4/5/2024
Works well great addiction to towing car