To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Customers prefer these similar products
2,000-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Features:
Specs:
Note: Do not install on vehicles with composite (plastic) leaf springs.
Hellwig Leaf Spring Comparison
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com. Let's take a look at these Hellwig EZ-990 helper springs. Now these helper springs are a custom fit for your 2009 to 2014 Ford F-150 two wheel and four wheel drives. Now on custom fit parts such as these springs, I do recommend taking advantage of our vehicle fit guide here at etrailer.com. Simply input the year, make, and model of your vehicle, and our fit guide will confirm if these will work for you, or if we have something comparable that will work for you.
Now these custom helper springs, with a load leveling capacity of 2000 pounds, are going to install above your truck's rear factory leaf springs to reduce sway and body roll while preventing sagging when towing or hauling light loads. And these are going to extend the life of your factory suspension, tires and brakes. These springs will flex with your leaf springs to limit bouncing while providing optimal stability. The U-bolts can be adjusted to suit different loads and the driver's and passenger side can be adjusted independently for uneven loads. Now these springs are made here in the USA of a durable steel construction, which is going to ensure a long-lasting performance.
And they feature a Silver Vein hammertone powder coat finish that's going to resist corrosion. Now this is a bolt-on insulation, and again, as I mentioned at the beginning of our time together, these are going to install above your factory leaf springs. Mounting hardware is included, and what I've tried to do here is assemble it loosely just to give you an idea of where the U-bolts and the hardware is gonna go when you install these. And I do wanna mention that you do not want to install these on vehicles with composite or plastic leaf springs. These helper springs are so durable and strong that they could potentially crack those composite or plastic leaf springs.
So if you have that, if you have those type of springs on your vehicles, these will not work for you. Now again, these do have a weight capacity of 2000 pounds. However, these Hellwig helper springs do not increase your vehicle's weight carrying capacity. Instructions are included to guide you through the insulation process, and Hellwig does put a lifetime warranty on this. Well, that's gonna wrap up our brief look today.
I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 4.2 out of 5 stars (16 Customer Reviews)
2,000-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.My order was packed good. The springs were easy to install and worked great.
I have worked on many cars foreign and domestic. Volvo, VW, BMW, Jeep, Toyota, Honda, Chevy, Ford. I have replaced the entire engine, replaced axels, rack & pinion, installed performance parts, Shocks, struts, brakes, timing belt, water pumps, pullies, et cetera et cetera. I have the tools and workspace. Onetime I even lent a deep socket to Toyota dealership to rotate my wheels so that my wheel paint won't get scratched (could not believe they did not had a deep socket to do the job correctly). Anyways I am serious about tools ok….
This is for 2022 Toyota Tacoma TRD sports. Now starting the actual review: The instructions are crap and so are the U-Bolts and Nuts. I think only the spring is made in USA, rest are from China cheap.
The instruction on #2 says to replace bump stop and fasten with factory Axel U-bolts and Tighten factory U-bolts to 80-90 ft-Lb. After putting the helper spring on top and factory bump stop, When you tighten the factory U-bolts to factory axel, the both ends of the helper spring raises past the gas tank on the front driver side and frame on both driver and passenger side. At this point "There is no clearance to insert the Hellwig supplied U-Bolts". I am curious to see if someone from Hellwig can tell me how to install this in sequential steps for 22 Toyota Tacoma. Oh, I did try to call the company but no one picked the phone. Alright, it was Sunday when I called and I am ok with if no one works on Lord's day. But at least have a voice mail that informs that you are on your own on Sunday's and call back like normal people starting Monday. I waited so long on the phone to hear some robo voice that I thought Lord himself was going to pick up the phone. You know this is just as awkward as extending your hand for handshake and the other person does not even see it and you are left hanging your hand and hoping no one else saw this.
The instruction on #1 also says to orient the long end of the spring towards the front but does not say " measuring from the center pin hole". This probably is common sense but it can be confusing for folks who do not do this install for living. My point is, If you are selling this to DIY's, you have to raise your instruction game to leave no doubt so that people feel good about their work. Or simply slap a sticker that fays front or back. But then…..
The Instruction on # 6 says " the clearance between the helper spring and the truck spring should be no less than 1/4 inch". My question is, what is the right point to reference in the helper spring to measure this distance from truck spring? In the helper spring at both ends, there is a "V" shape to house the U-bolts. Do you measure the bottom of the 'V' and the factory spring for 1/4 inch, do you measure the end tip of the helper spring and truck spring? If the answer is anywhere as long as both rear passenger and rear drive is measured at same spot, then just please say so . Otherwise slap a sticker or make a notch in the spring as a reference point to measure the distance for 1/4 inch. But then…
I should have said this in the very beginning "The nuts supplied are 17 millimeter or 11/16. There is no torque specified for this in the instruction as you can see in the picture under "Torque Table". If you or anyone from Hellwig is irritated by why I cannot just have wrote things in Chronological order, then you are feeling my pain which makes us brothers.
If only certified installers should do this work then please do not sell to the regular people who have sense not to call on Lords days. Anyways, this is my 2 cents. Hope there is someone at other end who collects change for living. Heck, there are people writing instructions for living or manning the phone or not. Installation Pain is real and not only the humor in this review. Rating will change when someone will address the issues mentioend.
i got these springs to help the load on my 2017 silverado. it did a great job reducing the bounce from my 6000 lb trailer . would definitely recommend
Easy to install worked great for the application I used it for
Excellent technical support and ease of ordering…. Timely delivery…
Product looks well built, will be installing it soon.
Installed on my 2012 Silverado 1500. I haul a Palamino SS1251 truck camper and these really helped with the squat when truck camper is installed. Helps the ride on the highway with much smoother ride. Very easy installation. Tech said to leave 1/2” gap for my application.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.