1. Vehicle Awnings
  2. Rhino Rack
  3. Roof Rack Mount
  4. Trucks/Vans/SUVs
  5. 118 Square Feet
  6. Passenger Side
Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Passenger's Side - 118 Sq Ft

Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Passenger's Side - 118 Sq Ft

Item # RR33200
lowest price pledge
Retail:$794.00
Our Price: $714.60
You Save: $79.40
Vehicle Awnings
This item qualifies for Free Shipping
Shipping Weight: 51 lbs
Quantity: 
In Stock, Ships Today
Rhino Rack 118 Square Feet Vehicle Awnings - RR33200
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Canvas awning swings out and around from the passenger side to the rear of your vehicle, providing 118 sq ft of shade. Easy one-person setup with integrated drop-down poles. Bolts to your Rhino-Rack Pioneer platform or crossbars with top channels. Lowest Prices for the best vehicle awnings from Rhino Rack. Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Passenger's Side - 118 Sq Ft part number RR33200 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (14)
  • Q & A (27)
  • Videos (3)
  • Photos
  • Why etrailer?

Rhino Rack Vehicle Awnings - RR33200

  • Rhino Rack
  • Roof Rack Mount
  • Trucks/Vans/SUVs
  • 118 Square Feet
  • Passenger Side

Canvas awning swings out and around from the passenger side to the rear of your vehicle, providing 118 sq ft of shade. Easy one-person setup with integrated drop-down poles. Bolts to your Rhino-Rack Pioneer platform or crossbars with top channels.


Features:

  • Roof rack awning swings out from the passenger side to the rear of your vehicle to provide 118 sq ft of shade
    • Perfect for campers, tailgaters, or tradesmen
    • Endorsed by Cancer Council Australia - provides 50+ UPF sun protection
  • Easy one-person setup - simply swing out and prop up with included poles, guy ropes, and pegs
    • Telescoping poles are permanently attached and fold down from the frame
  • Simple installation in the top channels of your roof rack crossbars or Pioneer platform
    • Fits Rhino-Rack Heavy-Duty crossbars with adapter (RR31102 - sold separately)
  • Channels in awning frame let you mount lightweight accessories, such as shovel and axe holders (sold separately)
  • Extensions and sidewalls (sold separately) let you customize your setup
  • Ripstop, polyester canvas is UV, water, and mold resistant
  • Powder coated, anodized aluminum frame and poles resist corrosion
  • Integrated PVC cover protects the awning when stowed on the roof of your vehicle
    • Conveniently stores ropes and pegs with the awning
  • Complete system includes awning, mounting hardware, 8 guy ropes, and 10 pegs
    • Also includes 2 replacement hinge knuckles
  • Olive green color


Specs:

  • Application: Rhino-Rack Pioneer platforms and most crossbars with top channels
    • Fits heavy-duty bars with available adapters (sold separately)
  • Minimum crossbar spread: 27-1/2"
  • Coverage: 118 sq ft
  • Telescoping pole height: 7'
  • Weight: 47.4 lbs
  • 1-Year limited warranty


Note: This awning is only compatible with crossbars that extend past the roof rack's legs.


Batwing diagram

Batwing installed in use

Perfect for tailgating, outdoor markets, and camping, the Rhino-Rack Batwing provides shade anywhere you take your vehicle. The awning mounts to your Rhino-Rack Pioneer platform or crossbars with top channels. It is supported by built-in telescoping poles that let a single person set it up and break it down in minutes. Made of ripstop, polyester canvas that is resistant to UV rays, water, and mold, the awning swings out 270 degrees from your passenger's side to provide you with 118 sq ft of shade. With different awning extensions (sold separately), you can expand the shade coverage or even create an enclosure around your vehicle. The Batwing's 50+ UPF protection has earned it an official endorsement by Cancer Council Australia.


Quick, One-Person Setup


Unfolds to 270 degrees

Using just one motion, the Batwing unfolds 270 degrees from your vehicle's roof to provide 118 sq ft of shade. Just unzip the storage bag, flip the integrated storage pouch containing pegs and guy ropes out of the way, and bring the awning from the side of your vehicle toward the rear. Then, use the integrated tension strap to secure the awning to the back of your roof rack.


Built-in telescoping support poles

The telescoping support poles are built into the awning, which means you don't have to attach each pole separately during setup. Simply unclasp each pole from the built-in clips on the awning and drop them into position. After this, tighten the poles to the necessary height. You can also adjust the poles to different heights to suit any type of terrain, so the awning is always steady and secure.


poles held in place by magnets

When not in use, the poles are held in place by rare earth Neodymium magnets. Just push them toward the frame and they'll automatically secure to the housing.


Secure the poles to the ground using the included metal pegs

After all the poles are set up, anchor them to the ground using the included pegs. The feet have 2 holes built in to let you drive 2 pegs into the ground at opposing sides for enhanced stability.


Hooked guy ropes for maximum tension

To bring the Batwing to maximum tension, attach the hooked guy ropes to the frame and secure them to the ground with the pegs. Using the additional tie-down point in the mid-section of the awning will allow rainwater to easily drain off. As an added benefit, the guy ropes have a bright orange color to improve visibility at night.


Tough, Durable Construction

durable construction

Strong and lightweight, the awning's ripstop, polyester canvas is waterproof, mold resistant, and UV protected. The telescoping poles and awning frame are constructed of aluminum and finished with a black powder coat, so they won't rust or fade when exposed to the weather. When not in use, all the parts are stored inside the heavy-duty PVC storage cover.


cancer council endorsement

The Batwing has earned an endorsement from Cancer Council Australia for its UV protection. It received a 50+ UPF rating during independent testing, meaning it will allow less than 2 percent of effective UV transmission.


Easy, No Drill Installation

Mounts directly to your Rhino Rack rooftop crossbars

The Batwing is mounted to your roof in one piece, so there is no need to remove anything from the storage cover during installation. The included mounting brackets attach to the channels on the Batwing's frame and then mount to your Pioneer platform or crossbars with top channels. The brackets can be used for either system using different mounting hole configurations. They simply install into the integrated channels and tighten down.


The Batwing will install to Rhino-Rack Heavy-Duty crossbars with a hardware kit (RR33101 - sold separately). To mount it to square and round roof rack crossbars, you will need to purchase a mounting kit (sold separately).


Additional Accessories Available

The Batwing has optional extensions to provide more shade and improve your outdoor experience. All of these extensions easily install by zipping to the outer edges of the awning. And just like the Batwing, they use telescoping poles, guy ropes, and pegs to secure to the ground. They are made of durable, ripstop polycotton canvas which is waterproof, mold resistant, and UV protected.


extension examples

The Batwing can be expanded with the 48 sq ft extension (RR31101 - sold separately). With this extension, you can increase your overhead coverage or make a windbreaker or sidewall.


tapered extension examples

Using the 78-3/4 sq ft tapered extension (RR31112 - sold separately), you can either increase your coverage or form a sidewall. When you integrate 3 more tapered extensions, you can create a full enclosure around your vehicle.


integrated channels

In addition to attaching extensions to the awning, the frame itself can hold additional accessories. The awning frame is compatible with channel mount accessories, like the Rhino-Rack shovel holder (RR43103 - sold separately). These accessories attach to the frame using the same channels you use to mount the awning to your roof rack.




33200 Batwing Sunshade Awning for Rhino-Rack Crossbars - Right - 118 Sq Ft

Replaces RR31200

Installation Details RR33200 Installation instructions



Video of Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Passenger's Side - 118 Sq Ft

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Rhino-Rack Crossbar Batwing Awning Review

Speaker 1: Today we're going to be taking a look at the Rhino Rack Batwing Awning for Rhino Rack Crossbars. It's available for the passenger side with part number RR33200. It's also available for the driver's side with part number RR33100. This awning can be set up anywhere you can park. It's perfect for tailgaters, campers, tradesmen. Really, if you like shade, we've got you covered.

It wraps 270 degrees around your vehicle giving you 118 square feet of shade. The awning itself is made out of a RipStop polyester canvas. It's going to be resistant to water and mold. It's lightweight, but it's going to offer maximum sun protection. The supports are made out of an anodized aluminum with a black powder coat finish so they're going to be resistant to rust and corrosion.

The included guy wires are highly visible orange so you don't have to worry about you or anybody else tripping over them.It holds up very well. As you can see, we've got a windy day, and we're not having any issues. It's going to work with any roof rack system that accepts T-slot accessories. You can pick up an adapter for square or round bars with part number RR31105. Its compact design leaves plenty of room for other accessories.

As you can see, we've got a bike rack here and room for more. One of our customers, Torn says, "During initial setup in my driveway, I was wowed at how easy everything was to set up myself. Another thing I love about the batwing is that the vertical support legs are built into the awning itself. They deploy and pack away very easily. The coverage this awning provides is just what I wanted, and its features make it well worth the investment."We'll go ahead and show you how to get it set up.

We'll start by disconnecting the hook and loop. From there, we'll unzip it all the way across. Then we'll flip the cover over exposing our awning. Next, we'll remove the peg bag from the pocket and then flip the pocket over. Now we can undo the three hook and loop buckles, and our awning is just going to drape down. Then we'll grab the four poles, and we'll rotate the whole thing back around to the rear of the vehicle. Then, we'll locate the strap attached to the awning, and we'll attach it to our anchor that we pre-installed into our KeyTrak. Then we can tighten it up. This is going to stretch out our awning and hold it in place. No reason to over-tighten, just get it nice and secure and make sure that it's solid. Now we're under the awning. We'll unclasp our supports, lower them down, and get them in position. They're telescoping so we can raise them to the desired height and then tighten them up. There are four poles included.Now, the nice thing about these supports is that once their heights are set, they can be stowed away at that length so you need to adjust them over and over again. Now, we can take the pegs and anchor down our supports. At the bottom of each support, each foot has a guide so the pegs go in at an angle. If you need to, you can take your foot or a mallet to push them in the rest of the way. Then we'll attach our hook and loop to each support. Now, we'll take the guy wires and attach them to our supports. We'll start by taking the end of the hook, attaching it the top of the support. Now, we'll take one of our pegs, we'll drive that in. We take our guy wire, we go underneath. We'll come up, pull it nice and tight and attach it back to itself.Now, if it's rainy, you can attach your guy wires to your awning. This'll create a dip that helps with water runoff. Now, the awning comes with more guy wires than it does stakes. Now, you have the option of using only one stake per support, or you can pick up more stakes with part number CAM51010. When you're all done, everything folds back into itself and the magnets keep the supports in place. With everything rolled up, the PVC cover protects it when you're on the road.And that's going to complete our look at the Rhino Rack Batwing Awning for Rhino Rack Crossbars.


Customer Reviews

Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Passenger's Side - 118 Sq Ft - RR33200

Average Customer Rating:  4.5 out of 5 stars   (14 Customer Reviews)

Canvas awning swings out and around from the passenger side to the rear of your vehicle, providing 118 sq ft of shade. Easy one-person setup with integrated drop-down poles. Bolts to your Rhino-Rack Pioneer platform or crossbars with top channels.

- RR33200
by:

Much improved over the previous Foxwing. It’s stable in strong winds if guyed out properly, love the integrated poles and guy and stake stowage Recommend the tapered extensions with this, creates great wind/ rain barrier and additional privacy and covered living space. Disappointed in the bag design. It leaks while stowed allowing the awning fabric to stay wet and mildew. 700064



- RR33200
by:

I live in a semi arid region of Southern California, so shade is pretty crucial for me. Since I intend to do solo trips in my Honda Element, I shopped around for an awning that looked easy to deploy solo, and the Batwing was it. It’s not installed yet, since etrailer’s shipping was so fast, it actually got here before all the parts for my roof rack were delivered! 560651



- RR33200
by:

We just got back from our second long trip out west and I didn't want to give a review of the awning until we returned. To be honest I'm not happy with the Rhino awning. For starters the cover leaks badly. After every rain I need to open, drain and let dry to prevent mold. The front of the support has already cracked. This doesn't effect operation but is disappointing. The legs of the awning supports have also have broken and no longer adjust, not sure if I caused this or they have just seized in one of the pole sections. The awning can not be set up in the lightest of wind unless it's fully staked out with guy lines. Doesn't sound like a big deal but negates the advantage of setting it up quickly, a $50 big box store awning can be set up as quick. For the price it's not worth the cool factor and I wouldn't recommend to a friend for purchase. Hope this helps 663562



- RR33200
by:

I was looking for an awning that covered the tailgate of my truck bed and I already had an awning that hung of the side of my truck so instead of buying a second small one I sold off my existing side awning and purchased the Batwing. I had read great reviews about the previous model and was confident that the new one would be even better. When the awning arrived I was very disappointed just by looking at the packaging. It looked like it had been thrown around whenever it was handled and had several punctures in the cardboard box. It also had a ton of extra tape on the ends as if it had been opened before or fell out during shipment. After opening up the box I was relieved that there was not any significant damage to the awning itself. Ok on to the awning itself... During initial setup in my driveway I was wowed at how easy everything was to setup by myself. I love how the poles are held in place to the mounting plate with magnets and to deploy it all you have to do is grab the top one, pull it away and the rest of them release on their own. Another thing I love about the Batwing is that the vertical support legs are built into the awning itself. They deploy and pack away very easily. I did not stake it down or guy it out during this test setup. The awning comes with hardware and brackets to mount onto your roof rack though you may need different hardware depending on what rack you have. The coverage this awning provides is just what I wanted and it's features make it well worth the investment. One thing I would change is I wish the cover was fully zippered instead of 90% zippered with a Velcro closure at the back end. The hinge is exposed and water runs inside and gets the awning wet. I live in the Pacific northwest and a little bit of rain has found it's way to the front of the awning. 494460



- RR33200
by:

This is the one piece of camping gear that once it's set up people just come by and say "whoah". First off, it's huge and the amount of coverage it gives is amazing and makes single panel awnings just look silly in comparison. I love how easy it is to set-up which makes it a no-brainer whether or not to deploy it, always yes. Here's a few tips after using it for a year... If it's windy at all stake it down and if you have a buddy to help with setup all the better. These things are like giant sails and I've snapped a few of the hinge pieces due to big gusts and not staking it down. The GOOD news is that the hinges are designed to snap under load (instead of the more expensive arms) and are easily replaceable and you can do it with basic hand tools by yourself so keep the spares they give you in the stake pouch. You can extend the coverage with the zip-on panels ...or just get some spring clamps and attach a sheet/tarp/towel/whatever for the extra shade. I had someone come up and chat me up about the awning and he asked this simple question, "if you had to do it over would you buy this one again?". 100% yes. 728847



- RR33200
by:

We received the Batwing Awning last week and immediately went to set it up. The packaging leaves a bit to be desired as it is mostly just the awning inside a box with no real protection. But ours arrived just fine. The installation supplies came in a separate box which for some reason wasn't delivered the same day. Not a huge deal but a bit of a bummer. We ordered the optional Yakima round bar install kit as well. Installation is pretty simple and quick. The installation manual is a bit convoluted and not super clear in my opinion but really looking at the parts it is pretty easy to figure out how it installs. We installed the "L" brackets to the rack first using the Yakima mounting kit. We left the u-bolt a bit loose so the brackets could move a bit. From there, there are 4 t-bolts that slide in channels so we slide those in. Now for lifting the actual Batwing, it will depend both on your size and vehicle. We used two people and it was easy. We left one end on the ground and lifted the other till we could installed on of the t-bolts. From there one of us lifted the other end up and the second person slide the bolts to where they needed to be and installed the nuts. Then it was just a matter of tightening everything down. We did snug the t-bolts down and then loosened them a half turn which left the batwing slide in the tracks for positioning. One thing to note with the mounting. There is only one spot for the U-bolt to go through the "L" bracket. Depending on how your bars are setup you might not have all that much adjustment possibly as to how far out the batwing will be. On our bars there is only about 2.5 inches of bar and then the Yakima "feet" that mount the bar to the trailer. The L bracket and u-bolt are such a design that we had to mount it to those 2.5" which has the batwing approx. 1" over the edge of the trailer. We would have liked to have it recessed over the trailer but the Yakima feet prevent this. This isn't a problem with the batwing but just something to consider. After we had the batwing mounted we decided to open it up. If you have watched a video....it really is that easy. Undo the end Velcro flap, unzip, and flip the cover over. Then just grab the front and pull the bar out. Then just start walking it out and it opens right up. It does sag quite a bit and I wouldn't leave it unsupported for long. Or if its windy I would consider doing one section at a time and staking it down before opening it up more. Once its open pull down the support leg and set it to the height desired. The legs are just tall enough to clear the rear hatch on our teardrop. Our teardrop is a "off-road" model and does sit a bit higher so regular height teardrops would have no issue. To put it away its pretty much the opposite. Though we started at the far end, folded the leg up, then moved to the next pole. Putting the Batwing away was overall simple and easy. The magnets hold the poles in well enough. We got it to zip the first try though it was a bit tight. When rolling the material to put it away try to spread it out instead of letting it bunch up in one spot. Overall for our first time setup/deployment took around 5 minutes and putting it away took about the same. Future times should be quicker. Of note is to make sure you stake it down and use the guy-wires if its at all windy. We didn't for the driveway setup and a slight gust (around 10mph) was enough to lift one section up for a moment. it does act like a big sail so just make sure to have it properly secured if its going to be windy. As for use, it provides a lot of cover. Especially for shade! For rain protection it will work well. Though you might end up with less "space" if the rain isn't straight down. On our teardrop the edge by the door barely goes past the door so any sort of wind could most likely blow rain on the door. Same at the last section it barely covers the rear drivers corner so again it might not fully protect against rain. But it still does provide a lot of coverage. We do plan to get one of the available wall sections to attach for if we do need rain protection. We are very pleased with both the quality and the ease of use of the Batwing. We recommend it! 543881



- RR33200
by:

This review is directed more toward doing business with etrailer rather than reviewing the product itself. Although I'm sure the awning will not disappoint after reading too many positive reviews. I'm an active duty Coast Guard member serving in Southeast Alaska in a remote island where shipping is a nightmare more often than not. I contacted RhinoRack directly for this awning and asked about shipping. RhinoRack responded with saying shipping to Southeast Alaska would be $600!!! It was a pleasure doing business with etrailer. They were able to save me lots of money, and kept me informed on my purchase and shipping information. The item arrived on time and in great condition. Thank you for your help and support etrailer! 642049



- RR33200
by:

I've had the Rhino Rack Batwing for 1 year now and it has held up to many weather scenarios. From blistering sun to pounding rain and wind, it hasn't failed me yet. Every trip we go on, people are amazed at it's size and simplicity. And they're even more impressed by how affordable it is versus a conventional awning. I have been very impressed with the quality of this product and would promote it to anyone looking for an 8 foot awning. 703293



- RR33200
by:

Fast delivery! Great product and very easy to use website! I will be an etrailer return customer! 606936



- RR33100
by:

Review from a similar Batwing in Vehicle Awnings


Overall Very Happy. It is mounted on driver side of 2001 Tacoma with bed topper. Some things I would have liked to know at time of purchase: -It really is a large amount of space, when opened. (We got it so that we have a place to be other than the cab or the bed when its raining) Lots of space to work or relax, with great rain coverage -I don't think I get a full 270 degrees with it (maybe 265 degrees), meaning when opened up, it doesn't quite come all the way around to the back corner of the tail gate and sit straight inline with the back of the truck. Instead it angles out slightly leaving a slight gap between the awning and back of the truck where rain can drip in. -The plastic hinge pieces WILL break eventually. its not a big deal, you probably won't even notice till you go to put it away. mine came with a couple extras and changing them out is easy. In a year of heavy use, I had one break. I do think making these parts out of aluminum would be an improvement. -It is very very fast and easy to use. takes about a 60 seconds to set up or put away, so we end up using it way more than we originally thought we would. the strings and stakes take longer but on a not-windy day, you really don't need them. -You will need to get creative or just buy the zip on extension when the sun is at an angle. It is easy to lower one side or the other but then the ceiling is very low over your head Does exactly what we want: lets us enjoy outdoors more and actually be outside when truck camping, despite the weather. Would buy again. Will be buying an extension or 2. 707418



- RR33100
by:

Review from a similar Batwing in Vehicle Awnings


Installed this Batwing on my Intech Micro Toy Hauler - Only thing I had to do was buy some 2" bolts so that I could bolt her to the rack. Easy to install and super easy to set up. In a few years I can tell you how well it holds up. From the looks of it my guess would be that it will hold up pretty well. 541676



- RR33100
by:

Review from a similar Batwing in Vehicle Awnings


It arrived really fast. I haven’t installed it yet,, but I’ll let you know. 668763



- RR33100
by:

Review from a similar Batwing in Vehicle Awnings


Good quality. Lots of shade. Easy to fold up. 638587



- RR33100
by:

Review from a similar Batwing in Vehicle Awnings


Everything I expected and more. Well built, easy and intuitive setup/repack, and could install myself in about 15 minutes. Also, amazingly fast shipping. 515727


26
26

Ask the Experts about this Rhino Rack Vehicle Awnings

  • Roof Mounted Awning for a 2015 Subaru Forester with Subaru Roof Rack Crossbars
    I have awning recommendations for you but the Batwing Awning # RR33200 is not a fit for the Subaru E361SSG000 crossbars. There isn't an adapter for it either. But as long as you can get your crossbars spaced 36 inches apart on center you can use the 8-1/2 foot Thule awning # TH490008 or the 10 foot model # TH490010. You would just need 1 set of adapters # TH490001.
    view full answer...
  • Can Trunk Be Left Open on 4Runner with Rhino-Rack Batwing Installed
    I spoke with my contact at Rhino-Rack regarding the ability to open the trunk door on your 4Runner with the Batwing Awning # RR33200 installed. My contact coincidentally has a 4Runner herself with the Batwing installed and said she is able to open the hatch and leave it open without a problem. She did say that the door won't open completely (about 90 percent of the way) as the awning will prevent it from opening all the way but this does not affect its function or risk damage in any...
    view full answer...
  • Can Rhino Rack Batwing Awning Attach to 2019 Toyota Rav 4 Adventure with Factory Crossbars
    We have a roof rack awning that does fit the factory crossbars of your 2019 Toyota RAV4 as the Yakima SlimShady part # Y07409 but the Rhino Rack Batwing you mentioned requires a roof rack that has top channels so you'd have to add that as well. You could add the Malone roof rack part # MPG216 to the raised side rails of your roof and you'd be ready to use the Batwing.
    view full answer...
  • What are the Dimensions of the Rhino-Rack Batwing Awning # RR33200
    The Rhino-Rack Batwing awning # RR33200, when opened and set up, has an overall length of 98.43 inches and overall width of the same 98.43 inches. This offers a total of 118 square feet of coverage. When collapsed for storage the length is about half and the width is approximately 4 inches depending on how tightly everything is packed up in the bag.
    view full answer...
  • Does Rhino Rack Batwing Awning Fit Rhino Rack Crossbars that Fit Camper Shells
    I checked out all of the Rhino Rack roof racks that fit the top of a camper shell and they all have channels on the tops of the crossbars so the Rhino Rack Batwing Awning part # RR33200 would fit and work well.
    view full answer...
  • Length of Batwing Awning When Folded
    I reached out to a representative of Rhino Rack who told me that when folded, zipped up and sitting on the rack, the Batwing Awning # RR33200 measured just slightly over 98 inches. So you were correct that it was very close to 8 feet (96 inches) long!
    view full answer...
  • Replacement Zipper for Rhino-Rack Batwing Swing-Out Awning RR33200
    Thank you for your recent purchase of the Rhino-Rack Batwing Swing-Out Awning # RR33200. My contact at Rhino-Rack was able to advise the brand of zipper on this awning is YKK but the specific size of zipper was not available. It is not offered as a replacement part by them. If the zipper ever needs repair or replacement most dry cleaners (and some shoe repair shops) will have the necessary zippers and experience sewing heavy-weight fabrics.
    view full answer...
  • Availability of a Lock for the Rhino-Rack Batwing # RR33200
    As of right now (April 2018) Rhino-Rack does not have a lock for their awnings, including the Batwing # RR33200 that you referenced. The best way to discourage someone from stealing a product is by making it look like it is difficult to get at. Using a cable lock like part # e98891 to wrap around the awning would at least show someone that you aren't going to make it easy on them.
    view full answer...
  • Does Rhino Rack Batwing Awning Fit with Front Runner Roof Rack
    I checked out the Front Runner roof rack you have on your vehicle and since it has channels on top of if it the Rhino Rack Batwing part # RR33200 would fit on it and work well.
    view full answer...
  • Rhino-Rack Batwing Awning Compatibility with Nissan NV
    The Batwing Awning for Rhino-Rack Crossbars - Passenger's Side # RR33200 has poles that support the awning from the ground. I reached out to the manufacturer and they said there is a height of 90.55 inches which is just over 7-1/2 feet. It will fit on your Nissan NV Cargo which the 2018 model stands 83.9 to 84.9 inches tall according to the manufacturer.
    view full answer...
  • Can Rhino-Rack Batwing Awning Mount to Thule Aeroblade Edge Crossbars
    I spoke with my contact at Rhino-Rack regarding the Batwing Awning # RR33200. She said that while the Batwing is compatible with the top channels on the Thule AeroBlade Crossbars the issue will be with the particular Edge model that you have. Since the AeroBlade Edge systems such as the part # TH7502-TH7503 feature crossbars that sit flush with the mounting feet and don't actually extend past them, the Batwing will not be compatible. This is because the Batwing requires that the crossbars...
    view full answer...
  • Will Rhino Rack Batwing Awning Fit on Yakima Airstream Cross Bars
    The Rhino-Rack Batwing Awning # RR33200 that you referenced is designed to fit crossbars that have top channels just like your Yakima Jet Stream bars so this kit will work well for you.
    view full answer...
  • Awning For Sprinter Van 144 Low Roof With Pop Top
    I may have an option for you but the Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Passenger's Side - 118 Sq Ft part # RR33200 is designed to fit into the t-slot of a rhino rack cross bar. I do not have a fit for the Sprinter van with the pop up when it comes to roof racks. I recommend to use the Thule HideAway Roll Out Awning for ProMaster or Sprinter - Roof Mount - Waterproof - 80 sq ft part # TH620001 which will mount to the Sprinter roof with part # TH308073 which will...
    view full answer...
  • Does Rhino Rack Batwing Awning Come with T-Bolts to Install in Rack Channels
    I found the question page that you are referring to where Erik told a customer that the # RR33200 does fit the Gobi Stealth rack. All of the hardware Erik mentioned is included with the T-bolts and U-bolts.
    view full answer...
  • Rhino Rack Batwing Awning Mount to Gobi Stealth Roof Rack
    Yes! The RhinoRack BatWing will mount to the Gobi Stealth rack on the two 1-1/8" diameter accessory attachment crossbars within your Gobi platform using the RhinoRack mounting kit # RR31103 . This kit uses T-bolts to attach to the awning and then 1-1/8" U bolts to attach to your Gobi accessory bars.
    view full answer...
  • What Crossbar Spread Dimensions Does Rhino-Rack Batwing Awning # RR33200 Fit
    The minimum crossbar spread that the Rhino-Rack Batwing Awning # RR33200 can fit on is 27-1/2 inch and it does not have a stated maximum. The Thule Aeroblade roof rack you have installed similar to the Wingbar part # TH711420 and # TH450R would work perfectly as it would have a spread of 38 inches. I attached a review video link for this awning setup for you to check out as well!
    view full answer...
  • How To Use the Rhino-Rack Batwing Awning on a 1991 Volkswagen Vanagon Westfalia
    I do have an option that will allow you to use the Rhino-Rack Batwing Awning part # RR33200 on your 1991 Volkswagen Vanagon Westfalia but I do not have any information on Rhino-Racks intentions to produce an adapter for rain gutters or straight bolt-on applications. However, if you were to install the Thule WingBar Evo Crossbar part # TH711520 and the Thule Rapid Gutter Feet for AeroBlade Crossbars part # TH300R which is a fit for your Vanagon Westfalia that will then allow you to mount...
    view full answer...
  • Can the Rhino-Rack Pioneer Platform Be Installed on Aero Crossbars
    In order to attach the Rhino-Rack Pioneer Platform to a set of crossbars you would need the kit that comes with universal mounts which is part # RR42114BF for 48" long x 37" wide or part # RR42115BF for 58" long x 47" wide. This system attaches to round, square, aero, elliptical, and most factory crossbars. This includes Thule AeroBlade crossbars however, they do not make a kit with AeroBlade crossbars that will fit your 2018 Jeep JL Wrangler Unlimited. Instead, I recommend using the...
    view full answer...
  • Rhino-Rack Batwing Awning Installation on Yakima Round Roof Rack Crossbars
    Rhino-Rack confirmed that their Batwing Awning # RR33200 can be mounted on round Yakima roof rack bars using the adapter kit # RR31105 that was designed originally for use with their now-discontinued Foxwing awning. For a secure fit the Batwing requires that the crossbar spacing must be no less than 27-1/2-inches between the two bar centers but the adapters can be used either on the outsides of the rack feet or on the insides. Naturally, "inboard" installation is preferred from a safety...
    view full answer...
  • Will Batwing Awning Work With Yakima Roof Rack With Round Crossbars
    The red arrow you are referring to in the accompanying photo is a part of the mounting hardware that comes with the now-discontinued RR32105, which is the entire awning and not just one part. You would not be able to attach a Batwing Awning # RR33200 or # RR33100 to your Yakima round bars; the best option for you is the Yakima SlimShady Roll-Out Awning # Y07409 which will work with round crossbars so long as they have a spread that is a minimum of 24".
    view full answer...
  • Installing Rhino-Rack Batwing Awning to Thule Crossbars
    The Batwing Awning for Rhino-Rack Crossbars - Driver's Side # RR33100 or passenger side # RR33200 will mount to your Thule crossbars without any additional parts if you have the aero style bars. If you have the square load bars, then there is not a directly compatible bracket and u-bolt for the Batwing awning so minor customization is needed. The # RR31105 is not directly compatible with the Batwing brackets as seen in the attached photo.
    view full answer...
  • Will RhinoRack Batwing Awning Work with Yakima HD bars
    Yes, the Rhino-Rack Batwing Awning Driver's Side # RR33100, or # RR33200 Passenger's Side are compatible with the Yakima HD Crossbars, like # Y01157. The Batwing uses the top channel on your Yakima bars to attach to them with the included hardware. Both the Yakima HD bars and the Rhino-Rack Vortex bars use a 7/16 inch wide top channel, so you'll just want to follow the same instructions as if you were mounting the awning on the Vortex bars. I've attached the complete installation instructions...
    view full answer...
  • Is There a Way to Lock Rhino Rack Batwing Awning to Roof
    Since Rhino Rack doesn't offer a lock designed for the Batwing like the # RR33200 and the Thule you mentioned would not work the best option is a cable lock like the part # e98891 which you could wrap around the awning setup to secure it.
    view full answer...
  • Does Rhino Rack BatWing Awning Mount to Yakima JetStream Crossbars
    Yes, the Batwing Awning # RR33100 (Driver's Side) or # RR33200 (Passenger's Side) can be mounted to your Yakima JetStream crossbars so long as they extend out past your roof rack's feet. They have mounting brackets which install inside the channels of the bars, as per the linked install instructions. I have added a link to a video review of this awning for you to check out as well.
    view full answer...
  • How To Use the Rhino-Rack Batwing on a 2004 Jeep Wrangler with Smittybilt Roof Rack
    I may have an option for you but I took a look at the Smittybilt Roof Rack that you have on your 2004 Jeep Wrangler and the only way I can think of to attach one of our Rhino-Rack Batwing Awnings is with new crossbars. The reason for this is that the awning requires a top channel to mount and the round crossbars you have do not possess this top channel. The best option we have for new crossbars are the Rhino-Rack Vortex Aero Crossbars part # RRVA180B-2 for 71" long or part # RRVA200B-2...
    view full answer...
  • Vehicle Awning That Mounts to Yakima Crossbars Without Top Channel
    The Batwing Awning for # RR33100 or # RR33200 will not mount to Yakima crossbars unless they have a top channel. Instead, you need the Yakima SlimShady Roll-Out Awning # Y07409, which will clamp to aero crossbars so long as the crossbar spread is a minimum of 24".
    view full answer...
  • Batwing Awning on Frontrunner Slimline 2 Roof Rack
    You will be able to mount the Rhino-Rack Batwing awning # RR33100 (driver's side mount) or # RR33200 (passenger side mount)on the FrontRunner Slimline 2 roof rack using the included hardware in the T-slots on your rack. This mounts in the same manner that the Batwing does on the Rhino-Rack Pioneer Roof Rack # JB0169 .
    view full answer...

Do you have a question about this Vehicle Awning?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality vehicle awnings for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate vehicle awning information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Jacob T
Video Edited:
Dustin K
Test Fit:
Colin H
Test Fit:
Shane H
Installed by:
Hayden R
Edited by:
Daron K
Written by:
Jason W
Updated by:
Alex H
Video by:
Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-8924