bing tracking image
  1. Trailer Suspension Parts
  2. Redline
  3. Hangers
  4. Suspension Kits
  5. Boat Trailer
  6. Camper
  7. Car Hauler
  8. Snowmobile Trailer
  9. Utility Trailer
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
Redline

Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers

Part Number: APT6SE-36
In Stock
$224.06
Trailer Suspension Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Leaf-spring mounting kit includes 3-3/4" tall front hangers, 3-3/8" tall center hangers, 5-1/6" tall rear hangers and necessary hardware. Equalizers are 13-1/8" long. Components for mounting axle to springs sold separately. Great Prices for the best trailer suspension parts from Redline. Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers part number APT6SE-36 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (4)
  • Q & A (0)
  • Videos (1)
  • Photos

Redline Trailer Suspension Parts - APT6SE-36

  • Hangers
  • Suspension Kits
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snowmobile Trailer
  • Utility Trailer
  • Slipper Springs - 2 Inch
  • Tandem Axle
  • Redline

Leaf-spring mounting kit includes 3-3/4" tall front hangers, 3-3/8" tall center hangers, 5-1/6" tall rear hangers and necessary hardware. Equalizers are 13-1/8" long. Components for mounting axle to springs sold separately.


Features:

  • Attaches 4 leaf springs (sold separately) to your trailer frame
  • Includes:
    • (2) Front hangers: 3-9/16" tall (from top to center of bolt hole)
    • (2) Center hangers: 3-3/8" tall (from top to center of bolt hole)
    • (2) Rear hangers: 5-1/6" tall (from top to center of bolt hole)
    • (2) Straight equalizers: 13-1/8" long
      • 7/8" Diameter center hole for mounting to hanger
      • 9/16" Diameter side hole for attaching to spring
    • (2) Spring keeper bolts: 3-1/4" long x 5/16" diameter
    • (2) Locknuts: 5/16" diameter
    • (6) Shackle bolts: 3-1/2" long x 9/16" diameter
    • (6) Locknuts: 9/16" diameter
    • (2) Wet equalizer bolts: 4-1/2" long x 7/8" diameter
    • (2) Locknuts: 7/8" diameter locknut
    • (2) Cotter pins
  • Designed for use on trailers with tandem, 3,500-lb to 8,000-lb axles
  • Does not include components for mounting axle to springs


APT6SE-36 Tandem Axle Hanger Kit - 2" Slipper Springs - 3,500 lbs to 8,000 lbs





Video of Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Redline Trailer Leaf Spring Suspension - Hangers - Suspension Kits - APT6SE-36

Hello, everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Dexter Tandem-Axle Trailer Hanger Kit for two inch wide slipper springs with 36 inch axle spacing. Now this leaf spring mounting kit is designed to attach four two inch wide slipper springs on trailers with tandem 3,500 pound up to 8,000 pound axles. Now, the slipper springs are not included. Those we do sell separate on our website. This part here is just the leaf spring hanger kit, and it includes everything that's shown on the table.

We're gonna go through all these pieces so just so you know what you're all getting, and we're gonna start with the hangers. We'll start with the front hangers, which are these two right here. These are 3 9/16 inch tall front hangers. And when we say the height of a hanger, when you measure it, it's not the bottom to the top. It's measured from the center of the bolt hole to the top of the hanger.

So if we get a ruler, and if we go center to the top, that'll give you 3 9/16 inch measurement for the front hangers. The center hangers, which are these right here, same way when we measure 'em, center to the top, 3 3/8 inches on the height of the center hangers, and the rear hangers right here, if we measure those, center to the top is 5 1/16 inches tall in the rear hangers. Now the equalizers, which are these two long equalizers right here in the middle, these are 13 1/8 inches long. And again, put a tape measure on that, 13 1/8 inches in the length, straight equalizers. Now, if you notice on the equalizers, these attach to the center hangers and it'll have a 7/8 inch diameter center hole here for mounting to the hanger using the wet bolts there.

On this set, it'll have 9/16 diameter end hole for attaching to the spring. And on right down here on the other end, a 5/16 diameter end hole for the spring keeper bolts for the slipper spring to sit on. Now the hardware, we mentioned it comes with the two wet equalizer bolts that are 7/8 inch diameter, 4 1/2 inches long, with the lock nuts and the cotter pins. These wet bolts can be greased, we call 'em wet bolts 'cause they have a grease circuit fitting that you can attach a grease gun to and lubricate 'em, and this is what'll attach the equalizers to the center hangers. The shackle bolts, there's six shackle bolts, four over here, two over here, with the lock nuts.

These are size 9/16 inch diameter by 3 1/2 inch long shackle bolts. And then the two spring keeper bolts, which are 5/16 inch diameter by 3 1/4 inch long, with lock nuts also. Now the equalizers, the 13 1/8 inch long equalizers allow for 36 inch axle spacing. Now this kit does not include any components for mounting your axle to the springs. But that should do it for the review on the Dexter Tandem-Axle Trailer Hanger Kit for two inch wide slipper springs with 36 inch axle spacing.


Customer Reviews

Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers - APT6SE-36

Average Customer Rating:  5.0 out of 5 stars   (4 Customer Reviews)

Leaf-spring mounting kit includes 3-3/4" tall front hangers, 3-3/8" tall center hangers, 5-1/6" tall rear hangers and necessary hardware. Equalizers are 13-1/8" long. Components for mounting axle to springs sold separately.

by:

It has been almost a year before we got the hangar kit installed on an old trailer. I don't weld very good so had to wait for my son to get time to come up and put them in. They worked perfectly on the stretched 7k axles we put on in place of the 3.5k axles that were on the trailer originally. Once we got wheels and tires to fit, we loaded a tractor with a loader on the trailer and everything worked like it should. We have been very happy with the service from etrailer, having purchased a couple sets of hanger kits, equalizer bolts, trailer hitch and other trailer items. Very happy with their timeliness in getting our orders shipped out!

Dave

9/6/2019

Very good, finally used it several times recently and hauled my small excavator with no problems.



by:

The product look very high quality and fit as it said it would so good job



by:



by:


4
4

See what our Experts say about this Redline Trailer Suspension Parts

  • Slipper Spring Trailer Suspension Hanger Spacing
    There is not a fixed spacing for the hangers in kit # APT6SE-36 since this depends on the length of the particular springs used. The hangers need to be close enough together that the curved ends of the slipper springs properly engage with the bolt or column they rest on. Please refer to the linked image, dimension B, to see this spring dimension. Measure this on your springs to get the approximate distance from the center of the spring eye to the highest point of slipper end.
    view full answer...
    Image 1 for
  • Tandem Axle 2 Inch Slipper Spring Suspension Kit with 13-1/8 Inch Long Equalizers
    You will actually just need kit # APT6SE-36 which is the same thing only the equalizers in it are 13-1/8 inches long. The hardware with each is specific to the kits so some of the other parts are different but for 2 inch slipper springs and 13-1/8 inch equalizers kit # APT6SE-36 is the one for you.
    view full answer...
    Image 1 for
  • Does Tandem Axle Slipper Spring Hanger Kit # APT6SE-36 Work with Springs that are 2 inches Wide
    We have one 6,000 lb axle rated slipper spring that is 2 inches wide. For that you would want the part # e67SR that is 27 inches long. The ends of this spring are hooked but do not come all the way back around like a C shape like what it sounds like you have. However, both styles are acceptable and will install in the same way. The tandem axle hanger kit part # APT6SE-36 that you referenced will work with what you have since you said your springs are 2 inches wide. I also attached a link...
    view full answer...

Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.