Video Transcript for Review of M-3 and Associates Trailer Ramp Springs - Single Ramp Spring - M376FR

Hi everyone. Steven here with etrailer.com. Today we're looking together at this left hand ramp spring rated for 2000 pounds of torque and made for a 1 1/2 inch shaft. Now folks, again, this is the left hand ramp spring. I've got it set up for your orientation. So when you're looking at this, the blue, that would indicate the left hand spring.

We do carry the right hand. That's sold separately. Now I wanna make sure that you're understanding the right side the best I can. So this is a left ramp on the trailer and as you can see again that orientation of the spring, it's on the left hand side of that ramp. Now going to another image, that same left hand ramp has both a left hand spring on the bottom left, and it also has a right hand spring on that same ramp.

So I think a lot of people get confused and order two left hands for the left hand side, but that's just not how it goes. So make sure you're understanding those correctly. If you're still a little confused, feel free to call us. We're more than happy to help you out the best we can. Now this is made of a high quality steel alloy.

It provides approximately 90 degrees of deflection. The spring legs from coil to tip are about 3 3/4 inches long. The width of the whole coil here is 2 1/2 inches. The overall length tip to tip is 10 inches, and of course, again, if it's a 1 1/2 inch diameter shaft. Now one thing to note, these bars need to be mounted flat to the surface on which they are being used.

So again, refer to the photos on the page. Call us if you need to to make sure you're putting these on correctly the first time. Well folks, that's gonna wrap it up for our look together. I'm Steven. Thanks for watching.