Does Tandem Axle Slipper Spring Hanger Kit # APT6SE-36 Work with Springs that are 2 inches Wide

Updated 09/13/2017 | Published 09/12/2017

Products Featured in This Question

Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers

(32)

$212.05

5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long

(280)

$70.57

Question:

I am getting ready to install suspension on my tandem axle utility trailer. Currently the spring perches on the axles are welded to the frame. I have a set of slipper springs, which I think are 2inch wide, but the slipper end is shaped like a C, not like what I see in the info for APT6SE-36. The axles are 6000 lb axles, and I will be replacing the hubs/drums/brakes soon as well. Would this kit be what I need?

asked by: Dave

Expert Reply:

We have one 6,000 lb axle rated slipper spring that is 2 inches wide. For that you would want the part # e67SR that is 27 inches long. The ends of this spring are hooked but do not come all the way back around like a C shape like what it sounds like you have. However, both styles are acceptable and will install in the same way.

The tandem axle hanger kit part # APT6SE-36 that you referenced will work with what you have since you said your springs are 2 inches wide.

I also attached a link to a page that has all of the 6k rated trailer hubs we offer. You'd need to select the bolt pattern of the hub you need as well as the style.

expert reply by: Jameson C