bing tracking image
  1. Trailer Suspension Parts
  2. Redline
  3. U-Bolts
  4. Camper
  5. Car Hauler
  6. Utility Trailer
Replacement U-Bolt with Nuts for 1-3/4" Wide, Square Trailer Axles - 9/16" Diameter
Redline

Replacement U-Bolt with Nuts for 1-3/4" Wide, Square Trailer Axles - 9/16" Diameter

Part Number: 175130
In Stock
$13.94
Trailer Suspension Parts
Add to cart
175130 - Square Axle - 1-3/4 Inch Redline U-Bolts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

5" Long U-bolt, in conjunction with a U-bolt plate and an additional U-bolt, attaches your square, 1-3/4" wide axle to your leaf springs. Great Prices for the best trailer suspension parts from Redline. Replacement U-Bolt with Nuts for 1-3/4" Wide, Square Trailer Axles - 9/16" Diameter part number 175130 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (96)
  • Q & A (0)
  • Videos (1)
  • Photos

Redline Trailer Suspension Parts - 175130

  • U-Bolts
  • Camper
  • Car Hauler
  • Utility Trailer
  • Square Axle - 1-3/4 Inch
  • 5 Inch Long
  • 2000 lbs
  • 9/16 Inch Diameter
  • Redline

5" Long U-bolt, in conjunction with a U-bolt plate and an additional U-bolt, attaches your square, 1-3/4" wide axle to your leaf springs.


Features:

  • Used with U-bolt plate to secure axle to leaf springs, which are mounted to the trailer frame
  • Attaches with a U-bolt plate (sold separately) and an additional U-bolt with same dimensions (sold separately)
  • Each side of U-bolt is threaded from 2-1/8" to end
  • Fits square, 1-3/4" wide trailer axles
  • Includes 2 nuts


Specs:

  • Bolt diameter: 9/16"
  • Length: 5"
  • Width: 1-3/4"


U-Bolt Diagram



175130 U-Bolt for 1-3/4" Wide Square Trailer Axles





Video of Replacement U-Bolt with Nuts for 1-3/4" Wide, Square Trailer Axles - 9/16" Diameter

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Redline Trailer Suspension 175130 Review

Today, we'll be reviewing part number 175130. This is Redline's Replacement U-bolt, with the included nuts for 1 3/4 inch wide square trailer axles. This is used with U-bolt plates to secure the axle to the leaf springs, which are mounted to the trailer frame. It's going to attach with a U-bolt plate, which is sold separately, and an additional U-bolt with the same dimensions, which is also sold separately. Each side of the U-bolt is threaded. If we take a measurement of the beginning of the threaded portion to the bottom of the bolt, it's going to give us a measurement of 2 1/8 of an inch. This is designed to fit square 1 3/4 inch wide trailer axles and again, it's going to include both nuts. If we take a measurement of the bolt diameter, that's going to give us a measurement of 9/16 of an inch.

The length that we have from the bottom of the crossbar, to the bottom of the U-bolt, is going to measure 5 inches. The width that we have between the two U-bolt posts is going to measure 1 3/4 of an inch. That's going to do it for our review of part number 175130. This is Redline's Replacement U-bolt with the included nuts. .

Customer Satisfaction Score:


Customer Reviews

Replacement U-Bolt with Nuts for 1-3/4" Wide, Square Trailer Axles - 9/16" Diameter - 175130

Average Customer Rating:  4.8 out of 5 stars   (96 Customer Reviews)

5" Long U-bolt, in conjunction with a U-bolt plate and an additional U-bolt, attaches your square, 1-3/4" wide axle to your leaf springs.

by:

Quick delivery and excellent customer service (with follow-up emails to ensure that everything was ok with the order). This replaced a broken bolt on a 1956 camper trailer, and it's a very close match to the original.



by:

Worked and fit perfect. Thanks

Bryan

12/7/2023

Working great. Holding my axel on my tear trailer. Very pleased with product and service.

Bryan

1/1/2024

Great



by:

Thanks for asking. I was very pleased with your products and service. I built my trailer suspension with the measurements and technical info from your web sight. Everything bolted right up. I finished the trailer on Friday afternoon, loaded it up Friday night, and pulled it half way across the country on Saturday and Sunday.
You will be the first place I look when I need trailer parts! *



by:

I replaced the suspension on an older horse trailer every thing was worn out.with this kit I was able to relocate the axles .
With the help from etrailer my project went without a hitch everything was exactly what I needed .
thank you very much



by:

They seem to be high quality replacement bolts. They fit perfectly. I have not had the trailer down the road yet but at least its back together.

Jason W.

3/23/2018

The trailer hasnt fallen apart in the last year so I guess theyre doing their job. Id buy again if necessary.



by:

I purchased replacement U-bolts, U-bolt plates, slipper springs and associated bolts and a replacement ball hitch for a trailer renovation project. Unfortunately I didn't take "before" pictures to show the poor condition of the trailer. The products and personal services provided by etrailer were simply fantastic. Their videos were very helpful but more important, the personal sevice I received when I called to clarify items needed and how to install them was incomparable. Courteous, patient and professional assistance made my transaction a success.



by:

They got here, they fit!



by:

Your prices are good and your shipping is fast.



by:

Had a hard time finding the u bolts until I found etrailer.com. They had exactly what I was looking for. The quality of the u bolts, nuts and the spring plates I purchased from them was great. Much better than all the wrong sized ones that I could locate locally. I would definitely buy from them again. Their communication was good as well.



by:

I got this u-bolt to replace a factory u-bolt while rebuilding my trailer. It fit just fine and came with locking nuts. The threads were a little uneven on length, but it wasn't an issue. (Probably only an 1/8")



by:

I was having a hard time finding a specific size U bolt for a boat trailer. After a couple of disappointments from other vendors, I ordered the needed parts from etrailer.com.

The sales staff was extremely helpful and the product arrived in a timely manner. The quality of the product was even better quality than I had anticipated and was perfect for the repair.

I will definitely go to etrailer.com. first next time to save myself the aggravation.....great group.



by:

These fit perfect around 1-3/4" leaf springs. You will likely need 4... Two on each side.



by:

the hanger worked perfectly, it didn't have any washers, but I had some, I also painted the axle and all the parts with the new hammer paint, the axle looks like new. the leaf is excellent, everything fit perfectly' it's a flat steel trailer with truck tires and I use it for hauling heavy equipment.



by:

U-Bolt supplied by etrailer was exactly what I needed for my utility trailer which was mounted on a model T Ford pickup chasse.



by:

I actually used the bolts for my safety chains for my gooseneck trailer.



by:

I searched through many sites to get these square bolts and plates for a square 1-3/4" axle. Must be a fairly rare axle. Nobody had them until I got to etrailer.com. Thanks!



by:

Size and dimensions were spot on! exactly what I needed to continue work on my trailer! Also shipping was fast! look forward to doing more business through etrailer!



by:

EXACTLY what I needed for my double axle rebuild: 9/16" X 5" long with 18threads/inch plus nuts



by:

Products appear all heavy duty, well machined, and fit properly.
Just what I needed, easy installation. The install videos can be/ were helpful.



by:

I always know my orders from etrailer arrive quickly and accurate. There product is the very best.



by:

These U-bolts are exactly what I was looking for, and they cost less than I could find them anywhere else. The quality is excellent, and they were delivered in a very timely manner. I highly recommend e trailer.com to anyone that needs the products they offer.



by:

These products were great. I looked all over for this particular size, and this is the only place I could find them. The only downside is that the items did not come with washers or lock washers.



by:

The trailer with your updates operates and looks like a new one...



by:

We were very happy with your friendly and efficient service. We like the wide variety of the products you carry.



by:

Products are as advertised and of excellent quality. Prompt shipping and professional. No fuss, no muss... what more could I ask for!

Christian

4/27/2019

Still on my boat trailer no issues!


25
96
Show More Reviews

See what our Experts say about this Redline Trailer Suspension Parts

  • Replacement U-Bolt Kit, Leaf Springs, Bolts and Shackles for 68 Aristocrat Lo Liner Trailer
    Installing the U-bolts and plate like that would be fine, but I would recommend putting the plate on the leaf springs and running the U-bolts around the axle instead. The good news is you're replacing them so you can make that change when you install them. Once you have your axle measurements we do have some kits you could use. If it is a 2" square axle the # CE23103 or for a 1-1/2" square axle the # CE23102. If it is 1-3/4" you will need the # 175130 along with the # 116308. Since you...
    view full answer...
    Image 1 for
  • Replacement For Square U-Bolt 1-5/8" x 3/8" x 4" Long
    The closest U-Bolts we have are the following. 1-1/2" x 1/2" x 5" # 1753223 1-3/4" x 9/16" x 5" # 175130 If neither of these will work for your application you can check your local hardware store.
    view full answer...
  • Can Round U-Bolts Be Used On a Square Axle Tube?
    You need to use square U-Bolts with having a square axle tube. Trying to use round U-Bolts you risk damaging both the bolts and the axle as it creates pressure points rather than distributing the load across the surface. We have a few different size bolts you can see in the list below. 1-1/2" U-Bolts # SP01-120 1-3/4" U-Bolt # 175130 2" U-Bolts # SP01-160
    view full answer...
  • Can Unique Leaf Springs be Replaced on a Very Old Trailer
    I believe the hubs are for 2,000 or 2,200 pound agricultural axles which is why the springs look so different. These hubs are designed for very low speed applications (5 to 10 miles per hour according to HADCO) so if you plan on going faster than that you will need to look at replacing the axle and hubs. You could use 2 of spring # e66SR. Each spring has a capacity of 1,250 pounds. If a new hanger kit is needed you can use # APS1. When used with spring e66SR the center to center distance...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Lift Kit Adding 2" For 1-3/4" Square Axle 5x8 Trailer.
    With square axles, neither of our over/under kits will be a fit to raise the height of the trailer so another option is to use longer hangers for the leaf springs. You will just want to confirm the hangar height. You may be able to use a hanger like part # E4139. This hanger is designed for double-eye springs and is 4-1/4 inches tall. The old hangers will need to be cut off and the replacement hangers welded on by a professional.
    view full answer...
    Image 1 for
  • Will a Leaf Spring Work on a 2 Horse Trailer With a Slant Ramp
    You were right on the money thinking that the 4-Leaf Double-Eye Spring # e54SR should work with your slant ramp on your 1989 Aluminum Classic Trailer. Through some research, I was able to find out that Redline supplies many of the ramp springs to horse trailer manufacturers. The key point to make sure these are the correct ones is to measure the ones you currently have - I realize they are broken, but, do the best you can. You need to measure from center of one eye to the center of the...
    view full answer...
    Image 1 for
  • U-Bolts for 1-3/4 Inch Square Axle
    For a square axle that is 1.75" wide, you would want the Replacement U-Bolt with Nuts for 1-3/4" Wide, Square Trailer Axles # 175130 along with the U-Bolt Plate for 1-3/4" Square Trailer Axles with 1-3/4" Wide Springs # 116308. I have added links to video reviews of both products for you.
    view full answer...
  • What is the Thread Length on the Replacement U-Bolt, # 175130
    I went out to the warehouse and measured a Replacement U-Bolt, # 175130, and the threaded part was 2-1/8 inches long.
    view full answer...
    Image 1 for
  • Can Round Trailer Axle be Replaced with Square Trailer Axle
    Yes, you can replace a trailer's round axle with a square axle as long as the weight capacity is appropriate. You will need a new U-bolt kit to connect the axle: 1-1/2 inch square axles # CE23102 1-3/4 inch square axles # 175130 for the U-Bolts and # 116308 for the plate 2 inch square axles # CE23103
    view full answer...
  • What Drill Bit Size to Use to Install Redline Replacement Trailer Axle U-Bolt with Nuts # 175130
    Since the diameter size of the posts on this u-bolt is 9/16-inch you can ideally use a 9/16-inch or 5/8-inch bit (or even a 1/2-inch bit if you have the room to move the drill around enough to ream the hole to the required size). In either case you will want to ensure that the bits you are using are intended for drilling in the material on your trailer. Please refer to the photo provided which shows the dimensions of this item. Often it is easier to start a smaller-diameter pilot hole,...
    view full answer...
    Image 1 for
  • Replacing Slipper Springs on Magic Tilt B16W Boat Trailer
    The best way to determine the length of the slipper spring you will need for your trailer is to measure the spacing, center to center, of the spring hangers. If this spacing is approximatley 23 inches, we have a couple of springs that can work well for you. If your spacing is different, feel free to let me know and I will see if we have a spring that will work for you. If your spring hanger spacing is 23 inches, a great replacement slipper spring is the SP-179275 4-Leaf Slipper Spring,...
    view full answer...
  • Availability Of 1-3/4" Wide Square U-bolts
    Hey Adam, thanks for reaching out. I am sorry to say that we do not offer a U-bolt that fits your specifications. We currently offer only one 1-3/4" wide square U-bolt, part # 175130. This has a 9/16" diameter and is 5" long. So, a good bit larger than what you are looking for, but this will be our closest option. I suggest that you try a local hardware supply store. That or find a way to make it work with slightly larger U-bolts.
    view full answer...
  • Threaded Section Length of U-Bolt # 175130
    The u-bolt part number you mentioned is discontinued but it's exact same as the part # 175130 which has a threaded section that is 2-1/8 inches long.
    view full answer...
  • Switching From Slipper Springs to Double-Eye on a Single 2K Axle Trailer with Square Axle
    To switch to double-eye spring suspension I recommend getting parts individually since the u-bolts cannot be swapped out of kits. The spring in the kit is # e84SR. We have a few different u-bolt kits for square axles including # CE23102 for 1-1/2 inch square axles. For a 1-3/4 inch square axles you can use u-bolt # 175130 and plate # 116308. And for 2 inch square axles we have # CE23103. You will also need a new hanger kit since double-eye springs use different hangers than slipper springs....
    view full answer...
  • Bolt Hole to Bolt Hole Measurements for 2,000 lb Coupler for 2 Channel and 1-7/8 Hitch Ball
    I took a look at each of the 2,000 lb trailer couplers that fit a 2" channel and connect to a 1-7/8" hitch ball, and none of them have bolt hole to bolt hole measurements of 1-1/4". The Channel Tongue Trailer Coupler # CT-2001-Z has a 2-1/4" on center measurements. The 1-1/4" bolt hole to bolt hole measurement you have is going to be too small for any of the current trailer couplers so what I strongly recommend is that you drill new holes which will allow you to use the coupler of your...
    view full answer...
    Image 1 for
  • Is Redline Replacement Trailer Axle U-Bolt # 175130 Galvanized or Zinc Plated
    The Redline U-bolt you referenced, part # 175130 is constructed of raw steel that has been lightly oiled to prevent corrosion during storage. It is not Galvanized or zinc plated.
    view full answer...
  • Replacing Inverted Leaf Spring Suspension on Old Utility Trailer
    The first thing you will want to do is to remove the current springs from the frame and the axle. You can still use your axle if it is in good working order, but you will also want to remove any hardware welded to the axle. To install leaf springs, you will first want a hanger kit. For your single axle trailer, I recommend Redline's Single-Axle Trailer Hanger Kit for Double-Eye Springs # APS1. This hanger kit will have a 1-1/2 inch drop for the front hanger, and a 7/8 inch drop for the...
    view full answer...
    Image 1 for
  • Suspension Replacement For Stock Trailer With 26 Leaf Springs
    To refurbish the suspension on your 1970 Champ Stock Trailer you will need a handful of items. For a suspension kit with equalizers order the etrailer # e99ZR kit including 2 standard steel equalizers where width is 7-3/4” from center of mounting hole to center of other mounting hole. Includes bolts and lock nuts sized for 1-3/4” wide springs. Suspension kit does not have the size shackle straps that you need so you will want to order 8 TruRyde # TRSL275 straps measuring 2-3/4” on center. For...
    view full answer...

Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Kathleen M
Video by:
Kathleen M
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.