Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re running a multi-axle setup, you need suspension parts that can handle serious weight. This center hanger is made for tandem- or triple-axle systems with 9,000-lb, 10,000-lb, or 12,000-lb Hayes axles. It gives your equalizer a strong mounting point so the suspension can flex and balance the load the way it should.
Not every hanger fits the larger springs found on heavy-duty setups. This one is built specifically for 2-1/2" wide slipper springs, giving you the correct spacing and geometry for smooth suspension movement. The fit keeps the spring ends aligned so the trailer tracks steady over rough roads.
The 1-7/8" tall body and 1" diameter bolt hole are sized to match the hardware and equalizer layout used on big multi-axle systems. That precision fit makes assembly straightforward and keeps everything centered under load. The hanger holds the equalizer at the right height so the springs share the work evenly.
This part is designed as the middle link in your suspension chain. It suspends the equalizer between axles so each set of springs can move independently but stay balanced. Whether you’re building or rebuilding a tandem- or triple-axle system, it’s the piece that ties the setup together for stable, consistent ride control.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the 1-7/8" tall center hanger bracket for 2-1/2" wide slipper springs. This center hanger will suspend the equalizer on tandem or triple axle trailers to provide attachment points for your slipper springs. This is a weld-on installation, attaches to the underside of the trailer frame. This one is designed for trailers with 9,000-lb, 10,000-lb, or 12,000-lb haze axles. It is designed to fit the 2-1/2" wide double eye springs that have the 1" diameter eyes, and if you see the hole in the side here, it is designed to work with the 1" diameter bolt. We do sell those separately on our website, and they are listed on the product page of this part as a related product. Quantity, this is for one center hanger.
Give you a few specs on this, we're going to do some measurements. The overall length, from this edge to this edge, put a ruler on it, is right at 5". The width, from outside to outside is right at 4-7/8" wide. The inside width is right at 4-3/16, and the overall height of the very bottom to the very top is going to be right at 3-1/4" tall. On hangers, when they give the overall height, this one they say 1-7/8" tall, basically that measurement is from the center of the bolt hole up to the top of the hanger.
If we do a ruler on center to the top, you can see it gets the 1-7/8" tall hanger. That should do it for the review on the 1-7/8" tall center hanger bracket for 2-1/2" wide slipper springs.
Ratings & Reviews
Bryan
9/15/2024
Very satisfied
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kevin T.
1/18/2020
Still working awesome, great parts