See what our Experts say about this Optronics Trailer Lights

• Is License Plate Bracket Needed when Using Cargo Carrier # C18113
  If you wanted to mount your license plate to the Curt Cargo Carrier part # C18113 you could but we don't have a specific way to do so. You could attach something like the part # LP35BB to it if you'd be willing to modify the carrier. Now that said we've found that when license plates are obscured by cargo carriers like this police officers generally are not bothered enough to pull people over and give them a hard time. Using a rise adapter to try and gain more ground clearance isn't...
  view full answer...
• Option For Adding License Plate Holder And Light Kit To Hollywood Rack Sport Rider Bike Rack
  Hello Stephen, thanks for reaching out. We actually get this question a lot. There is a way to add lights and a license plate holder to the Hollywood Racks Sport Rider bike rack, but there is not any kind of custom fit kit for this. Typically when people want to add a license plate holder to a bike rack, they need a light for the plate and they want to add a taillight kit as well. For your tail light signals you can mount some lights like part # 20174 to the rails of the bike rack with...
  view full answer...
• Why is There a Driver and Passenger Round Optronics Trailer Tail/Stop/Turn Light
  The Trailer Tail Light # ST24RB is labeled as the passenger side because the driver side option, part # ST25RB, has a clear section on the underside of the housing to illuminate a license plate on a bracket like part # LP10SB. If you already have a light dedicated to the license plate then you can definitely use 2 of the passenger side options for your trailer. Attached are some review videos for you to check out. These light assemblies ground through the mounting hardware and then you...
  view full answer...
• Brake Light Kit And License Plate Holder For A Hollywood Racks Sport Rider SE Bike Rack
  For your tail light signals you can mount some lights like part # 20174 to the rails of the Sport Rider SE Bike Rack # HLY84FR with brackets like part # BK70BB. This light kit will come with a 4-pole connector to plug into your vehicle's 4-pole trailer connector for your light signals. As for the license plate, you can use the Optronics LED Trailer License Plate Light # LPL56CB to mount your license plate to the rails of the bike rack as well for better visibility. This will come with...
  view full answer...
• Light Kit and License Bracket Holder Recommendation for the Hollywood Racks Sport Rider SE
  For your application I recommend the Light Kit # 20174 and 2 of the Mounting Bracket # BK70BB. These will mount under the horizontal bars for the Hollywood Racks Sport Rider SE # HLY84FR. When it comes to the license plate bracket I'm not quite sure what you could use though because any bracket with a light that we carry, like part # LPL56CB, is going to require more space to mount it than this bike rack provides. You might have to mount this kit to the horizontal piece as well because of this.
  view full answer...
• Can A License Plate Be Mounted On the Swagman Bike Cover
  I do have an option for you but the Swagman Bike Cover for RVs part # S24FR does not have a spot for a license plate. If you want, you could most likely attach the license plate with some zip ties or you could mount the license plate elsewhere with the Optronics LED Trailer License Plate Light part # LPL56CB or the License Plate Mount part #LP10SB.
  view full answer...
• Recommended Submersible Trailer License Plate Light With Bracket
  The Optronics LED Trailer License Plate Light with Bracket - Submersible # LPL56CB is submersible and will work with your trailer. On The LED Trailer License Plate Light with Mounting Bracket # 328-003-70BE if the lights are submerged they will stop working because they are not sealed correctly. The overall dimensions of the light is 8-1/2 inches long x 3 inches tall x 2-5/16 inches deep. The distance between the mounting holes (center to center) is 3-1/2 inches. The bracket is made...
  view full answer...
• Recommended License Plate Relocation Bracket To Use With etrailer Hitch Mounted Spare Tire Carrier
  When it comes to using The etrailer Hitch Mounted Spare Tire Carrier - 2 inch Hitch # e98ZR, I would use The Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens # LPL56CB to help relocate your license plate so its not blocked out by the carrier, and attach it using zip ties. The bracket has a 5 diode light that will help illuminate your license plate if it's plugged in. I attached a review video link below.
  view full answer...
• Replacement Tail Light Options For a 2020 Jayco North Point 5TH Wheel Camper
  The Command Electronics Lights # 328-003-85 & # 328-003-85L are the closest lights we have to the lights on your 2020 Jayco North Point 5th wheel. These lights do not have the reverse light function so they only have 3 wires. If you wish to retain the reverse lights you can use 2 of the Dual LED Trailer Tail Lights # CE86FR. You will need a separate License Plate Mount # LPL56CB as these tail lights do not have the ability to also act as a license plate mount.
  view full answer...
• Mounting Hole Spacing for the Optronics LED Trailer License Plate Light
  The two mounting holes on the Optronics LED Trailer License Plate Light part # LPL56CB which attach the bracket to the trailer are spaced apart 3-1/2" on center so it will be a direct fit for you.
  view full answer...
  
• Will License Plate with 5-3/4" Mounting Holes Fit Optronics LED Trailer License Plate Bracket
  Hey Eric, thanks for reaching out! Yes, a license plate with mounting holes 5-3/4" apart will work with the Optronics LED Trailer License Plate Light with Bracket # LPL56CB just fine.
  view full answer...
• Replacement License Plate Holder and Light for Shorelander Trailer
  Often the license plate holder has an integrated light that requires replacing the entire holder as well. I recommend the LED Trailer License-Plate Light w/ Mounting Bracket - 2 Wire - 5 Diodes - Clear # LPL56CB because there are no bulbs to replace and there is a lifetime warranty on the LEDs. You will need to cut the wires and reconnect the new ones. If you have something more detailed, send me a photo and we can continue to troubleshoot.
  view full answer...
• How to Determine Correct License Plate Light for Trailer
  License plate lights are universal so there aren't any specific fits for a 2018 Hyundai trailer, which means in order to determine the correct one, you only need to measure the width of the mounting holes. Knowing this spacing will allow you to get the correct light; for example, here are a few options: - 3-1/2" Between Mounting Holes: Optronics LED Trailer License Plate Light with Bracket # LPL56CB - 3" Between Mounting Holes: LED Trailer License Plate Light with Mounting Bracket # 328-003-70BE -...
  view full answer...
• What Wire Gauge Is The Optronics LED Trailer License Plate Light?
  The Optronics LED Trailer License Plate Light with Bracket # LPL56CB uses 20 gauge wire. This thin wire is all that is needed to power the led light as it only draws 0.045 amps at 12.8 volts.
  view full answer...
• How To Wire a License Plate Bracket with Light Like the LPL56CB
  In order to wire up a license plate holder with light like the # LPL56CB you'll just need to find the running light circuit on your trailer, so that this light turns on any time your trailer lights are on; if you've got clearance lights you can tap into those or you can tap into the tail lights. You'll want to use a circuit tester like the # PTW2993 to determine which wire carries power for that circuit, but that is how you would want to wire the # LPL56CB. It's a two wire installation,...
  view full answer...
• Light Kit and License Plate Bracket Recommendation for the 19x47 Curt Cargo Carrier
  For the 19x47 Curt Cargo Carrier # C18110 I recommend using the Light Kit # 20174 with 2 of the Mounting Bracket # BK70BB and the Optronics LED Trailer License Plate Light with Bracket # LPL56CB. You will need to connect the black wire from the license plate light to the brown wire of the wiring harness that comes with the light kit. You may also need an extension like part # 9653P to reach the 4-Way Flat connector on your vehicle. Please note that there isn't a light kit that is designed...
  view full answer...
• Can a License Plate Be Mounted to the etrailer Cargo Carrier
  I don't see any reason that you couldn't mount a license plate somewhere on the Curt Cargo Carrrier # C18100, but there aren't any parts that are specifically for this. Because of the shape of the bars on the carrier, your best bet would likely be just using some zip ties to secure the plate to the carrier. If you wanted to wire in a license plate bracket with a light you could use the Optronics LED Trailer License Plate Light with Bracket - Submersible - 5 Diodes - Clear Lens # LPL56CB....
  view full answer...
• License Plate Relocation Bracket for Viking Solutions Stack Rack II 2-Level Cargo Carrier
  It is good to note that when using a hitch mounted accessory like the Viking Solutions Stack Rack II 2-Level Cargo Carrier # 310-VSR201, that your license plate will be hidden when you have cargo loaded up. While Viking Solutions doesn't have a kit dedicated to relocating your license plate, we do have some options here at etrailer. I recommend either using the Mount Bracket # LP10SB or # LP5SB for your application. You will have to drill holes through the carrier, but after you do so...
  view full answer...
• Submersible License Plate Light and Bracket for Boat Trailer
  We do have license plate lights that are submersible and can be used on your boat trailer, though the Optronics LED Trailer License Plate Light w/ Bracket # LPL55CB is not submersible. Instead, you will need the Optronics LED Trailer License Plate Light with Bracket - Submersible # LPL56CB. I have added a link to a video review of this light for you to check out.
  view full answer...
• Recommended License Plate Light With Bracket for Boat Trailer
  For a license plate light and bracket on your boat trailer you want to use one that is submersible like the Optronics LED Trailer License Plate Light with Bracket - Submersible - 5 Diodes - Clear Lens # LPL56CB. I would not use the # M290B-P on your boat trailer. The Optronics light has a waterproof construction and specifically designed for applications like boat trailers. The housing and lens are sonically sealed together to create a single unit, which means that water will not get...
  view full answer...
• Replacement Recessed Mount 6-1/2 Inch Long Tail Lights for Trailer
  The best option we can offer you to replace the tail lights on your trailer is with the Optronics Fleet LED Trailer Tail Lights part # TLL12RK which are 6-1/2" long. The 6-1/2" long tail lights all fit in about the same size cutout so you should not have any issues. I would not be able to inform on the compatibility of using a different size light with larger grommet. For a license plate mount/light, I recommend the Optronics LED Trailer License Plate Light with Bracket part # LPL56CB...
  view full answer...
• Can Optronics LED Trailer License Plate Light with Bracket Connect to Non LED Product
  It would be perfectly fine; there are no issues to be aware of connecting the Optronics LED Trailer License Plate Light with Bracket # LPL56CB.
  view full answer...

Do you have a question about this Trailer Light?