Solution for Installing Trailer Wiring Where Wire Colors Are Different and Unknown

Updated 08/14/2020 | Published 08/12/2020

Products Featured in This Question

Miro-Flex LED Trailer Tail Light - 6 Function - Submersible - 18 Diodes - Square - Red - Passenger

(64)

$36.79

Hook Probe Circuit Tester

(60)

$12.27

Miro-Flex LED Trailer Tail Light - 7 Function - Submersible - 20 Diodes - Square - Red - Driver

(64)

$42.10

Question:

light with black green and red wire. i hooked the black to ground red to green on rt side and to yellow on lt side and green to brown. i still dont have tail light

asked by: Tammy R

Expert Reply:

So sometimes trailer wiring and taillight wiring end up using wire colors that are different from standard. It's frustrating but the only solution is to first verify what all of the functions of the wires are and then wire accordingly.

You can use a vehicle battery to verify the functions of the lights first and then use a circuit tester like part # PTW2993 to verify wiring by having it connected to a vehicle and then test the wires while all of the taillight functions are applied.

expert reply by: Jameson C