Replacement LED Tail Lights for 1990 Featherlite Horse Trailer
Published 03/15/2022
Products Featured in This Question
Question:
Thanks do all the lights have to be converted at the same time? The lights are 6.1/2 x2” approx and long oval shape held in by a rubber grommet. I can forward a picture if that would be more helpful. Some people have said I would need to add resistors to use the LED lights. Thank you very much for your information and guidance.
asked by: John M
Helpful Expert Reply:
You will be able to replace the incandescent lights on your trailer with LED without a problem. Like you said, you can just take the old lights out and replace them with new lights. If the Miro-Flex LED Combination Trailer Tail Lights - Submersible # STL28RB & # STL29RB you looked at would be a great choice assuming they are the style and size you want.
These are surface mount lights so they will be able to mount in most places without a problem. The dimensions of these lights are 5-1/4" wide x 5" tall x 2-5/8" deep. They use a 3-Wire design with separate ground hardwires to power and they include twist-on wire connectors.
If you are looking for something else I would be happy to help you find a replacement if you send the dimensions of your current lights and pictures if possible. I have attached a review and installation video for your reference.
Product Page this Question was Asked From
Miro-Flex LED Trailer Tail Light - 6 Function - Submersible - 18 Diodes - Square - Red - Passenger
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Marker
- Square
- Surface Mount
- Submersible Lights
- LED Light
- 5-1/4L x 5W Inch
- Red
- Optronics
more information >
Continue Researching
- Q&A: Replacement Passenger Side Miro-Flex LED Trailer Light 38 Diode
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Is the Bezel Included w/ the Miro-Flex LED Trailer Side Marker?
- Article: Trailer Tire Sizing
- Q&A: How to Measure for a Replacement Axle, Hubs, and Leaf Springs for a Boat Trailer
- Q&A: Comparing Fulton XLT and Dutton Lainson 2 Speed Winch
- Q&A: What Size Cut Out For Recessed Led Light
- Q&A: What Is The Weight And Specs Of Rapid Hitch Adjustable Ball Mount AM3411
- Q&A: Replacement For Grease Seal 32374 For Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Reasons to Convert Your RV Lights to LEDs Today
- Article: Ugly RV Makeover: How to Change Outdated RV Lighting
- Article: Trailer Wiring Diagrams
John M.
3/15/2022
Thanks do all the lights have to be converted at the same time? The lights are 6.1/2 x2” approx and long oval shape held in by a rubber grommet. I can forward a picture if that would be more helpful. Some people have said I would need to add resistors to use the LED lights. Thank you very much for your information and guidance.